Showing 12501–12520 of 51877 results
-
Tropel Mirror Mount Model 603 (2-Inch)
$125.00This item is a Tropel Mirror Mount, Model 603. It will accommodate mirrors or lenses of 2� diameter. The mount includes a large knurled clamping ring to secure the mirror in the mount without the requirement for special spanner tools. The clear aperture of the mount is 1.875�. Clear aperture of the securing ring is 1.75�. Outside diameter of the mounting system is 3.875�, with a nominal thickness for the clear anodized aluminum portion of 0.912�. Leveling of the element is accomplished via three symmetrically positioned micrometer spindles.
The mounting is in near-perfect condition. All spindles turn very freely.
Location MB 56-3
Photo set 567
***MPN 603
***OEM Tropel
***SKU*** DP135 -
-
Oriel Optic Mount, 1 Inch, without Rod
$30.00This is an Oriel Optic Mount, Model number 12712. The original part number includes a mounting pin, not present in this item. The mount will accept lenses or mirrors up to one inch in diameter and up to 0.4� in thickness. Free aperture of the mount is 0.75�. A delrin locking ring is included. Overall diameter of the piece is 2�. Overall thickness is 0.65�.
***MPN 12710
***OEM Oriel Corp
***SKU*** DP123 -
Davidson Optronics 90-degree Prism Adapter
$350.00This item is very unusual. It is a Davidson Optronics Model 104-0145 90-degree Prism Adapter. The adapter fits onto the ends of the standard 58mm diameter collimator objectives tubes. There are two ports on the side of the �cap�, and the collimator beam is split so one half is directed at 90 degrees to the right, the other half 90 degrees to the left. The reflector is a solid prism with silvered surfaces � I am not sure if it is polished metal or silvered glass. The adapter has a knurled cover that may be turned to block the side apertures.
I have not been able to discover any specifications on this device (such as the angular deviation of the right and left optic axes) but considering the manufacturer is Davidson Optronics, I would infer it is a very high precision device. I am not sure of its original application, but imagine it would be very useful for aligning two opposing mirrors parallel to each other without having to juggle any fixtures. For the last photo I placed different colored cards on either side of the mirror. The prism peak is actually quite sharp, but there is some cutoff in the reflections that makes it appear truncated.
Condition of the adapter is near perfect � the prism surfaces appear to be completely free of blemishes. The adapter did not come with any protective cabinet.
Location MB 53-5
Photo set 539.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Optical Prism Holders for sale.
We will work with you individually to find the perfect set up for your application..Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 104-0145
***OEM Davidson Optronics
***SKU*** DP107 -
Gaertner Precision Travelling Focus Drive
$250.00This is a rather unusual item. It is a combination X-axis precision translation drive and precision drum reading micrometer drive with a Z-axis rack & pinion drive. The X-axis has a 50mm scale divided into single units numbered every 10mm. The leadscrew has a pitch of 1mm so each revolution of the drum advances the drive 1mm. The drum has a scale very finely divided into 100 parts, again numbered every 10 divisions. Furthermore, the scale reads against a vernier directly to 0.002mm. The graduations are fine enough that it is easy to interpolate to 0.001mm.
The Z-axis is a simple rack & pinion drive. The dovetail fitting has an adjustable jib, but there are no graduations on the Z-axis. The face of the moving portion of the Z-axis is approximately 50mm by 100mm with two mounting bores (the component to be secured using bolts from the inside surface of the mount). Someone has machined an aluminum plate in such a way that the device may be mounted in three different positions.
The translator is manufactured by Gaertner Scientific, but I could discover no information about this particular piece. The condition is very fine � the leadscrew advances the carrier with the Z-axis drive very smoothly without backlash, and there is no play in the Z-axis dovetail. There is a bit of play between the rack and the pinion, however it is very minor. Shims could be placed under the rack to remove the play if desired.
***MPN
***OEM Gaertner Scientific
***SKU*** DP100 -
Laser Calcite Polarizing Prism
$199.00We are not sure of the manufacturer of this item � it has no maker�s markings anywhere.
We suspect Wollaston may be the manufacturer.This is a holder with a calcite prism installed. It splits an incident laser beam (shown in the photos with a small HeNe laser) into two beams perpendicularly polarized to each other. One beam appears to be much more divergent than the other, but this was not tested on an optical bench so no measurements were made. However, the beam that is �single� seems to process about the beam with the ghost images. I am not sure if the prism is a single oriented crystal of Calcite, or if it is actually a type of Wollaston prism. As can be seen in the third photo, the beam is split into two primary beams, one of which has the ghost reflections. I took additional photos with a polarizer alternately blocking the primary beam, and after a 90-degree rotation, the secondary (extraordinary) beam.
The cell mounting for the prism is 1 inch in diameter, not including the cap. The larger aperture on the smaller diameter side is about 5mm, that of the �cap� only about 3mm. There are two scribe marks on the cap which I would have thought indicated the permitted vibration directions of each beam, but they appear to be turned relative to the plane of polarization (perhaps the holder for the cell has the matching indications similarly offset).
The holders and prisms appear to be in perfect condition. The prism has some sort of anti-reflective coating but I am not sure what it is, or if it is optimized for a particular wavelength region. The prism appears to be approximately 7 or 8 mm square, but I was unable to measure this since access to the prism is precluded by the cap.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Laser Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!!
***MPN
***OEM Brand Unmarked
***SKU*** DP097 -
Small Leveling Fixture
$45.00Small Leveling Fixture for laser interferometer.
We are not sure of the manufacturer of this device, but it is very similar in function and size to the HP 10710A Small Leveling Base. It would be used to fixture components using the 1-inch cube factor. This base differs in several respects, however. Instead of using a cradle with a goniometer type motion, this base is hinged on one side using a spring steel blade. There are a pair of set screws which are then used to tip the plate very precisely. They can, in turn, be secured with a pair of adjacent Allen cap screws. This system would allow much finer control of the pitch of the attached device. Yaw may be adjusted using the ample slots in the base. The degree of pitch available is much smaller than that provided by the 10710A, and the component will not remain �face-centered� as it is adjusted. However, due to the small amount of motion provided, we doubt it is of any consequence. The main advantage in this base is in the degree of control.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. These bases include a pair of mounting screws along with a pair of elongated plates to cover the slot in the base.
Location W7-A
Photo set 518
***MPN
***OEM Brand Unmarked
***SKU*** DP086 -
Large Leveling Fixture
$50.00Large Leveling Fixture
We are not sure of the manufacturer of this device, but it is very similar in function and size to the HP 10711A Large Leveling Base. It would be used to fixture components using the 1.5: cube factor.This base differs in several respects, however. Instead of using a cradle with a goniometer type motion, this base is hinged on one side using a spring steel blade. There are a pair of set screws which are then used to tip the plate very precisely. They can, in turn, be secured with a pair of adjacent Allen cap screws. This system would allow much finer control of the pitch of the attached device. Yaw may be adjusted using the ample slots in the base. The degree of pitch available is much smaller than that provided by the 10711A, and the component will not remain �face-centered� as it is adjusted. However, due to the small amount of motion provided, we doubt it is of any consequence. The main advantage in this base is in the degree of control.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
Location W7-A
Photo set 517.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN
***OEM Custom
***SKU*** DP085 -
HP 10710A Leveling Mount (Sm) with 45-
$50.00This is an assembly consisting of an HP 10710A Small Leveling Base on which a 45-degree fully reflecting prism has been cemented. Although the prism could have been used to deflect a beam downwards through the aperture in the base, the excess cement that covers the face of the prism adjacent to the base would preclude such use � much of the aperture is filled with cement. Therefore it was intended for use in directing a beam upwards at right-angles to the base-plate.
The prisms are very rigidly mounted. Rather than break the prisms in an effort to remove them, we have decided to offer them in the condition found. The first-surface mirror is in excellent condition, and the prisms (although exposed) have not been chipped or damaged.
Dimensions of the base are as follows.
Height = 0.5�
Width = 1.1�
Length = 1.85�
Through-bore in base = 0.5�
Prism face 20mm square
These components have been removed from various fixtures. They meet our requirements for second quality used interferometer components. All mechanical adjustments work smoothly and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, however I doubt the prisms can be removed without damaging the glass. No hardware is included other than the two screws used to secure the cradle to the base.
Location W7-A
Photo set 513
***MPN HP 10710A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP081 -
Hewlett Packard 10556A Retroreflector, 1st Grade
$170.00This item is an HP 10556A Retroreflector in the large size (2� square) mounting format found in the earlier Hewlett-Packard Laser Interferometer Distance Measurment Apparatus. There are four countersunk holes in a 1.4� face-centered pattern. The holes are countersunk on both sides of the mounting flange. The �outside� set of countersinks are used when attaching the retroreflector to one of the 105xx series of interferometers. The �inside� set of countersinks are used to secure the corner cube to the special carrier with post (HP part number 10550B).
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included. Please note that not all of the reflectors have the plastic sleeve over the cylinder.
***MPN HP 10556A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP079 -
Hewlett Packard 10703A Retroreflector, 1st Grade
$150.00This is an HP 10703A Retroreflector. It consists of a glass corner-cube reflector in a cylindrical mount. It is a component in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The reflector is attachable to the 1.5� size interferometer bodies. They may also be fixtured independently of the interferometer.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included. The only cosmetic issue with this reflector is that the original label is missing, hence the slightly reduced price.
Location W7-A
Photo set 509
***MPN HP 10703A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP077 -
Hewlett Packard 10703A Retroreflector, 1st Grade
$160.00This is an HP 10703A Retroreflector. It consists of a glass corner-cube reflector in a cylindrical mount. It is a component in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The reflector is attachable to the 1.5� size interferometer bodies. They may also be fixtured independently of the interferometer.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10703A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP076 -
Hewlett Packard 10722A Converter Window, 1st
$155.00This is an HP 10722A Plane Mirror Converter window. It consists of a glass wedge that allows mounting a 10702A Linear Interferometer in a fixed position with a retroreflector attached to the moving component of a stage. It is a component in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The window is attachable to the 1.5� size interferometer bodies.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included. The only cosmetic issue with this particular window is the missing HP label with the nomenclature, hence the slightly lower price.
***MPN HP 10722A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP075 -
Hewlett Packard 10722A Converter Window, 1st
$150.00This is an HP 10722A Plane Mirror Converter window. It consists of a glass wedge that allows mounting a 10702A Linear Interferometer in a fixed position with a retroreflector attached to the moving component of a stage. It is a component in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The window is attachable to the 1.5� size interferometer bodies.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10722A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP074 -
HP 10702A Linear Interferometer 1st Grade
$225.00This item is an HP 10702A Linear Interferometer with one HP 10703A. Retroreflector and one HP 10722 Converter Window attached. A second reflector is not included. This is the basic interferometer in the 1.5� cube factor. It consists of a polarizing beam-splitter and the corner-cube reflector. One interferometer and one detector are required for each axis in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The addition of the compensating converter window allows a second retroreflector to move relative to the fixed interferometer body..
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10702A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP073 -
HP 10702A Linear Interferometer 1st Grade
$300.00This item is an HP 10702A Linear Interferometer with one HP 10703A Retroreflector attached. No converter window or second reflector is included. This is the basic interferometer in the 1.5� cube factor. It consists of a polarizing beam-splitter and the corner-cube reflector. One interferometer and one detector are required for each axis in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus.
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN HP 10702A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP072 -
HP 10715A Differential Interferometer
$1,200.00HP 10715A Differential Interferometer
HP 10715A Differential Interferometer, new in the original packing. It is one of the more elaborate interferometers using the 1.5� cube form factor. These components belong to the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The interferometer includes a special diagonal beam-splitting window which I have not figured out � it may be some sort of phase shifting plate to turn the plane of polarization. The interferometer includes a special magnetic target disk used in the initial setup of the device. It includes two retroreflector modules and a converter window, but attached to the opposite side from the converter, is another module with a right-angle beam-splitter with two exit ports on each side, marked �A� and �B�. There appears to be a quarter-wave plate between the main interferometer body and the second beam splitter. I have no idea how the diagonal mirror is used. . .
Slight chip on unused portion of the reference mirror.
Again, this is new in the box. I believe this component would benefit from the use of the large leveling base (HP 10711A). The only mounting faces are the opposite sides of the main interferometer body.
***MPN HP 10715A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP070 -
HP 10702A Linear Interferometer Options
$350.00HP 10702A Linear Interferometer with Options 001
This item, while missing the original HP label, has been identified as a type 10702A Linear Interferometer. The interferometer body has been scribed with the original beam-path schematic diagram found on the original label. This is one of the �medium-sized� components in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The central cube is 1.5� square. On one side of the beam-splitter is a type HP 10703A Retroreflector, and on the opposite side, a type HP 10724A Plane Mirror. This interferometer is equipped with the Option 001 � a type HP 10722 Converter Window. None of the components have the original labels.
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams.
These components have been removed from various fixtures. They have been classified as second quality because of the missing labels as well as the rather crudely scribed schematics. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear in very fine condition, although not new. Unlike new components, no hardware is included.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN HP 10702A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP068 -
Hewlett Packard 10567A Beam Splitter, 1st Grade
$195.00This item is an HP 10567A Dual Beam Beam-Splitter. This is a rather elaborate component in the Hewlett-Packard Laser Interferometry Dimensional Measurement System. It is intended for use with two axis stages. There is a single 45-degree diagonal mirror mounted within the block, but it is not face-centered. The mirror has three �zones� of reflectance (or transmission), and three apertures on the side of the block facing the laser source. The lowest aperture is uncoated so the entire beam passes straight through the block The central aperture is where the source laser enters the block. The substrate at that point has a 50% coating, so half of the energy is reflected to the top on the block, and the remainder passes straight through. The upper aperture (on the side facing the laser) has a 100% mirror � all the light flux is diverted at right angles.
The outer two apertures on the side facing the laser are intended for the return beams from the interferometer bodies in each axis. The receivers may be placed on the same side of the block as the laser source. This is very useful when there are space constraints.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10567A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP064 -
HP 10565A Remote Interferometer
$450.00This is an HP 10565A Remote Interferometer. It is one of the major components in the Hewlett-Packard Laser Interferometer Measurement System. It is based on the larger 2� cubes, and uses a 1.4� square bolt pattern for mounting. The interferometer includes the matching retroreflector (HP 10556A). The remaining three entry / exit faces of the cube appear to have � lambda plates installed within them. I believe this is the standard configuration for the interferometer. No other reflectors (retro- or mirror) are included.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!***MPN HP 10565A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP063
