-
$2,900.00
This is a combination of two Kensington linear stages to form an XY stage. The lower linear is of the 8500 series, and the upper of the 6000 series of stages. The model number is 8500-6×6000-4(-). Specifications include:
� Overall height – 4.75 inches
� Travel – lower stage, 6 inches – upper stage, 4 inches
� Dimensions of moving table – approximately 7 x 4 inches
� Overall dimensions of base – 11 x 11.75 inches (less manual actuation knobs)
� Side-mounted motors, belt-driven
� Serial number – 87-103-01
� Weight – 35.7 pounds
The stage is in excellent condition. Both axes work very smoothly. It appears that the two cover plates for the belt drives are lacking, but these do not affect operation. Both stages have optical encoders installed.
Location I1 L1
Photo set 1105
***MPN 8500-6×6000-4(-)
***OEM Kensington
***SKU*** 16849
-
$1,050.00
This is an aluminized 8 inch diameter parabolic mirror. The mirror was figures from a blank of poured Pyrex glass. The focal length is 130 inches resulting in an f-ratio of 16.25. Condition of the mirror is excellent � just a couple of voids in the coating at the very margin where it was secured by a retaining ring. Thickness at the margin is 1.39 inches with a relief of about 0.125 inches on the back of the mirror.
Location OA 14C
Photo set 1074
***MPN
***OEM Custom
***SKU*** DP626
-
$180.00
This is a single-axis drive cable set (includes both the DC motor drive connections and limit sensor connections). The cables are independent on the actuator side, using a pair of 9-pin D-connectors. On the controller side, the two cables are joined in a single round locking connector with 19 pins. Overall cable length is 12 feet. Cables are in near-new condition.
These will work with recent Danaher, Dover, and DCI stages in conjunction with the Primatics Motor Drive controller. We have several controllers that are each outfitted with four axis drive modules (please reference our �Recommended items� to the left of this column).
Please note that these cables are only available with the purchase of a Primatics Motor Drive controller!
Photo set 1072
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled & refurbished optical equipment, optical tables, laser
tables, vibration isolation systems, legs and bases. We will
work with you individually to find the perfect set up, for your
application.
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping, Handling & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific & industrial equipment.
We ship with the utmost care!
***MPN
***OEM Danaher Precision Systems
***SKU*** DP624
-
$150.00
This is a single-axis drive cable set (includes both the DC motor drive connections and limit sensor connections). The cables are independent on the actuator side, using a pair of 9-pin D-connectors. On the controller side, the two cables are joined in a single round locking connector with 19 pins. Overall cable length is 8 feet. Cables are in near-new condition.
These will work with recent Danaher, Dover, and DCI stages in conjunction with the Primatics Motor Drive controller. We have several controllers that are each outfitted with four axis drive modules (please reference our �Recommended items� to the left of this column).
Please note that these cables are only available with the purchase of a Primatics Motor Drive controller!
Photo set 1071
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868. We’re here ready to help you!
** Sh?ipping, Handling & Freight fees depend on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive
scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Danaher Precision Systems
***SKU*** DP623
-
$280.00
This item is a Klinger type PL light trap. Incident light is directed by a black cone to the interior wall of the trap which is also blackened. The return reflection via the cone is attenuated by a factor of about 1:10000. This is approximately 50 times better than a typical light trap.
Thread size � 68mm diameter, 0.75 pitch
Clear aperture � 60mm
Thread length � 11mm
Trap length � 64.5mm
Overall diameter � 85mm
Maximum energy � 30W / square cm.
These traps are useful in photometry applications, acting as a black body standard. Cone may be disassembled for cleaning with lint-free lens tissue, but wiping should be done in a radial manner to avoid concentric marks on the cone. This item appears to be in perfect condition. Model number is PL60, Klinger catalog number is 181 084.
Location MB 145
Photo set 1068.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Optical Sources for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.
**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments and industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 181 084
***OEM Klinger Scientific
***SKU*** DP620
-
-
$2,450.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 42260
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in new condition but is sold without the four connection cables (one cable for each axis motor, and one cable for each pair of axis limit sensors). Each pair of axis cables terminates in a single connector. If you need cable sets, please refer to our other listings. We also have suitable four-axis controllers available. (See our �other recommendations� to the left of this column for cables and controller references).
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP616
-
$2,380.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 38232
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in superb condition but is sold without the four connection cables (one cable for each axis motor, and one cable for each pair of axis limit sensors). Each pair of axis cables terminates in a single connector. If you need cable sets, please refer to our other listings. We also have suitable four-axis controllers available. (See our �other recommendations� to the left of this column for cables and controllers).
Location H3 R4
Photo set 1063
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP615
-
$280.00
Klinger 1-inch Gimbal Mount BM micrometer
This item is a Klinger (also known as Micro-Controle, and now manufactured by Newport) SL type Gimbal optic mount. The SL gimbals are characterized by massive steel construction with two mounting flats for orthogonal positioning of the tilting axes so the controls are on the right or left side of the beam path. The two planes of tilt perfectly intersect the plane of the optic (often a mirror) so adjusting azimuth or elevation results in the reflection point always being stationary on the optic axis. The elements are held in place by a spring-loaded ring. There are three small bearing points to precisely locate the optic in the main yoke, and another three within the spring-loaded clamping ring. The securing screws are not quite symmetrically placed to aid in removal of elements through the slightly larger opening.
This particular gimbal mount uses the standard �BM� type micrometer. Readings do not correspond to angular rotation, but they are repeatable, and graduated to 10 microns (sensitivity of setting is approximately 1 micron).
Specification on this particular gimbal mount include:
Optic diameter � 25mm
Optic thickness � between 1 and 12.5mm
Outside diameter � 89mm
Clear aperture of mount � 21mm
Approximate thickness of mount � 30mm (less micrometers)
Angular adjustment range � plus /minus 3 degrees
The mount is in excellent condition � micrometers fully functional throughout range. There is a small hole drilled in one of the base flats (see photo). The mounts do NOT come with the adapter plate. Those are listed independently as SKU number DP252 (they are only available with the purchase of a matching type gimbal).
Location MB 143
Photo set 1057.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868. We’re here ready to help you!
**Shipping & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of shipping sensitive scientific instruments & industrial equipment!!
***MPN
***OEM Klinger Scientific
***SKU*** DP609
-
$595.00
This is an extended linear motion air bearing stage manufactured by Dover Instrument Corporation of Westboro, MA. It will accept standard NEMA 23 mount motors. Stage includes special 0.500 inch thick sub-base plate.
Stage travel � 8 inches
Stage table dimensions � 4.375 by 4 inches
Table height � 2.875 inches above base
Stage base dimensions � 5 by 13.750 inches
Granite bearing � 2.484 x 1.238 inches in cross-section, 13.75 inches long
Leadscrew diameter and pitch � 0.500 x 0.100 inches
Stage weight � 12.35 pounds (without motor)
Serial number 4351
The stage is in excellent cosmetic condition but we have no way to test. There are some minor discolorations in the granite bearing block. Stage should have air supply before leadscrew is rotated to prevent possible damage to bearing surfaces
Location H3 R1
Photo set 1053
***MPN
***OEM Dover Instrument
***SKU*** DP605
-
$595.00
This is an extended linear motion air bearing stage manufactured by Dover Instrument Corporation of Westboro, MA. It will accept standard NEMA 23 mount motors. Stage includes special 0.50 inch thick sub-base plate.
Stage travel � 8 inches
Stage table dimensions � 4.375 by 4 inches
Table height � 2.875 inches above base
Stage base dimensions � 5 by 13.750 inches
Granite bearing � 2.484 x 1.238 inches in cross-section, 13.75 inches long
Leadscrew diameter and pitch � 0.500 x 0.100 inches
Stage weight � 12.35 pounds (without motor)
Serial number 5518
The stage is in excellent cosmetic condition but we have no way to test. Stage should have air supply before leadscrew is rotated to prevent possible damage to bearing surfaces
Location H3 R1
Photo set 1052
***MPN
***OEM Dover Instrument
***SKU*** DP604
-
$2,075.00
This is a Kensington linear motorized stage with 10 inches of motion. It uses cross-roller bearings for very large load bearing (multiple stages are easily stacked).
Stage base dimensions � 8.625 inches wide and 14.75 inches long.
Platform height (above base) � 2.845 inches
Platform dimensions � 5.70 inches wide and 14.75 inches long
Serial number � 86-209-01
Motor has brake option
EG&G PM Field DC Servo Motor � MT2115-014DF
Weight � 35.5 pounds
Stage is in near-flawless condition although it has not been tested with a driver. Manual control is would be possible using external control knob, however the brake is currently in the locked position.
Location H3 R1
Photo set 1051
***MPN 8500-10
***OEM Kensington
***SKU*** DP603
-
$260.00
This is a rotary attachment, possibly manufactured by Design Components (it was attached to one of their XY motorized stages). The rotary motion is via a massive bearing (5 inches in diameter). The fixed square plate has a square bolt hole pattern for �-20 Allen cap screws, 5.500 inches square. The rotary hub has a 2.75 inch diameter bolt circle with 8 equally spaced holes, all tapped for �-20 screws.
Mounting plate dimensions � 7 inches square by 0.50 inches thick
Rotary hub diameter � 4 inches
Overall height � 2.125 inches
Clearance of rotary hub above bearing retaining ring � 0.75 inches
Condition of the attachment is superb. There is one small ding in the bearing retaining ring that does not affect function, otherwise like new. There is no provision for motorizing the rotation, nor is there any means of clamping the rotation. Rotation is very firm without the slightest trace of backlash.
***MPN
***OEM Design Components
***SKU*** DP601
-
$750.00
This item is a Rara Unertl adjustable mirror mount. The diameter of the mounting plate is 7.5�, and a nicely fabricated hood has been fixed to the circumference. The base does not appear to be original, nor does the back plate, although all the positioning screws and ball-pivot joint are certainly original Unertl parts.
The mounting plate does have some wear marks near the center. Adjustment screws and piston are in near-perfect condition both cosmetically and functionally. The backing plate is very nicely machined, even though it is almost certainly not original. The angle plate will require some sort of riser block in order for the mirror mount to clear the base plate.
Location OA22 A
Photo set 1046.
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned,
recycled, refurbished & used Optical Mounts for sale.
Buy online or give us a call at 781-871-8868.We have experienced customer
service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you
if you prefer to use your own carrier.
We have over 32 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN
***OEM Unertl
***SKU*** DP598
-
$380.00
This Media Logic Inc. stage has massive THK cross-roller bearings and therefore should have great load-bearing capacity. The stage has a travel of 4 inches. The side-mounted leadscrew drive is a space-saving feature.
Stage base dimensions (not including motor) � 8 inches by 9 inches
Stage platform dimensions � 8 inches by 6 inches
Stage height � 2.75 inches
Leadscrew � 0.10 inch pitch by 0.5 inches diameter
Limit Switches � 9-pin D connector for OPTOs
Drive motor � Parker / Compumotor type LE57-51
The stage is in excellent condition and includes rather long motor connection cable. The motor has an extended shaft with a knob for manual actuation.
***MPN Model 1100
***OEM Media Logic
***SKU*** DP596
-
$2,475.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 38231
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Serial number � 38613
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in superb condition and includes two of the four connection cables (one cable for the Z-axis motor, and one cable for each axis limit sensors). The pair of axis cables terminates in a single connector. It does not include the cables for the theta rotation � they will need to be sourced separately.
Location H3 R3
Photo set 1042
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP594
-
$2,600.00
This table was first manufactured by N.E.A.T (New England Affiliated Technologies) which later merged with Dover Instruments. Recently, both companies are now represented by Danaher Precision Systems, making this stage of very recent manufacture. It features both small-angle theta rotation and Z-axis elevation. Z axis control is via a cam following a precision wedge. For this reason the stage must be used in a horizontal configuration.
Table diameter � 200mm
Theta rotary travel � plus / minus 4 degrees
Z-axis travel � approximately 12.5mm
Positional accuracy � 10 microns height, 0.05 degrees theta
Stage base dimensions � 7.874 x 7.874 inches
Minimum table height � 3.465 inches
Z-axis ways � four 25mm diameter non-recirculating bearing columns
Z-axis motor � VEXTA Model PH268M-E1.5B
Z-axis motor equipped with VEXTA Clean Damper Model D6CL-6.3 OY8
Stage serial number � 38231
Pitch and yaw � 15 arc-seconds
Payload � 10 kg
Serial number � 38231
Additional information may be found at the following links (the first link covers the standard Z-axis stage, and the second link gives more particulars on the special �theta-version�):
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=61
http://www.dovermotion.com/StandardProductDetailPage.aspx?ID=62
The table is in superb condition and includes all four connection cables (one cable for each axis motor, and one cable for each axis limit sensors). Each pair of axis cables terminates in a single connector.
Location H3 R3
Photo set 1041
***MPN Z-Theta
***OEM Danaher Precision Systems
***SKU*** DP593
-
$200.00
This is a Kensington riser plate suitable for use with their 10-inch travel 8500 series stages.
Length � 14.75 inches
Width � 7 inches
Height � 1.5 inches
Material � black hardcoat Aluminum
The riser is center-relieved on both sides by approximately 0.20 inches. Width of relief channel is 3.995 inches. Condition is excellent.
***MPN
***OEM Kensington
***SKU*** DP592
-
$475.00
We pride ourselves in the quality and value of our optical tables. Please contact us for the best pricing by phone or by clicking the �Ask us a question� link above.
This Design Components Inc. rotary stage is worm driven. The bearings appear to be either Teflon or Delren sleeve bearings. The motor does not have a type number. The table must be used horizontally since it runs in an oil bath (level monitor window is recessed on the side of the housing).
Base housing – 6 inches by 5 inches and 2.241 inches high
Adapter plate affixed to the base 6 by 10 by 0.375 inches
Platform height � 4.750 inches (including the adapter plate)
Rotary platform is 2.187 inches proud of the housing and 4.998 inches in diameter
NOTE � Cap screws protrude even when adapter plate is installed
The motor adds approximately five inches to the width of the narrow side of the housing. There is no means of manual positioning. Condition is superb.
Location H3 R3
Photo set 1039
***MPN
***OEM Design Components
***SKU*** DP591
-
$660.00
This is an extended linear motion air bearing stage manufactured by Dover Instrument Corporation of Westboro, MA. It does have a motor installed along with a motor connection cable. There is also an external proximity sensor for one end of excursion.
Stage travel � 6 inches
Stage table dimensions � 4.375 by 6 inches
Table height � 2.625 inches above feet
Stage base dimensions � 7 by 14 inches (plus 1.25 inches for motor-side foot)
Granite bearing � 2.484 x 1.238 inches in cross-section, 13.75 inches long
Compumotor A/AX57-51 with extended shaft for manual operation
Leadscrew diameter and pitch � 0.500 x 0.100 inches
Adjustable limit switches, but no connections presently
The stage is in superb cosmetic condition but we have no way to test. Stage should have air supply before leadscrew is rotated to prevent possible damage to bearing surfaces
***MPN
***OEM Dover Instrument
***SKU*** DP589