Showing 12001–12020 of 51875 results
-
Control Laser Nd YAG Cooling Chamber CP-5
$50.00Control Laser flow chamber in superb condition � includes optical bench carrier. The chamber includes a Nd YAG laser rod, reflector cavity (in excellent condition � very minor bit of corrosion on one side of the lamp flow tube support chamfer), all gaskets, heat sink cover, and lamp contacts. Also includes one flow cell on the laser rod side.
Notably missing is the exciter lamp and the second flow cell. The lamp contacts are the clip type, and you may wish to replace them. There is quite a bit of plating loss on the contacts. The chamber is also missing the pair of tapered light baffle supports. All of these items are very easy to replace.
Chamber has a model number �CP-5� stamped in an attached label.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Laser Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing..**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN CP-5
***OEM Control Laser
***SKU*** DP482 -
Control Laser CP-5 Nd YAG Cooling Chamber
$50.00Control Laser CP-5 Nd YAG Cooling Chamber.
Control Laser flow chamber in excellent condition � includes optical bench carrier. The chamber includes a Nd YAG laser rod, the reflector cavity (in decent condition � just a bit of corrosion on one side of the lamp flow tube support chamfer), all gaskets, heat sink cover, and lamp contacts..
Notably missing is the exciter lamp and both flow cells. The lamp contacts are the spring-loaded bearing pad type, not the clips. Contacts appear to be in excellent condition.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Laser Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN CP-5
***OEM Control Laser
***SKU*** DP481 -
Control Laser Q-Switch on US Laser Adjustable
$95.00Control Laser Q-switch, type 201319, serial number 2203/90. Cavity is in perfect condition � no flaws visible. Four connections for coolant. Condition looks like new. Switch is installed on a US Laser optical bench carrier that has kinemetric adjustments for both elevation and azimuth. Optic axis is nominally 50mm above optical bench reference surface. All components are in near-new condition.
BMI Surplus, Inc. has a huge inventory of new, used and pre-owned Electronic Parts For Sale!
We will work with you individually to find the perfect set up for your application..
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 201319
***OEM Control Laser
***SKU*** DP477 -
US Laser Carrier with 4-axis Mount
$90.00US Laser Carrier with 4-axis Mount.
This appears to be a specially modified US Laser optical bench carrier that has a four-axis mount attached. The aperture is empty, but it appears that it was intended to hold a spatial filter � the aperture is quite small. Ardel Kinemetric mount has adjustment in Y and Z axis, as well as elevation and azimuth.Mount is in good condition and all motions work as they should..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Laser Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM US Laser
***SKU*** DP474 -
US Laser Upcollimator 6:1 on Carrier
$300.00This is a US Laser �Up-Collimator� (otherwise known as a beam-expander) on a US Laser optical bench carrier. The two-lens system uses a negative and positive lens in series for a 6:1 ratio of beam expansion. The lenses are coated for use at 1064nm. Catalog number of the apparatus is 1006-7.
The mount is quite sophisticated. There are kinemetric adjustments for elevation and azimuth, and the collimator may be centered within the mount after backing off the four chrome screws on the front of the mount. Additionally, the entry element (smaller negative lens system) can be critically set and locked using a helical focus drive.
The collimators are in spectacular condition. Please see our other listings for additional US Laser components, most especially the spatial filters that would be used in conjunction with the collimator.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868. We’re here ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 1006-7
***OEM US Laser
***SKU*** DP468 -
US Laser First-Pulse Shutter, Integrated Safety
$95.00This is a US Laser standard optical bench carrier with three integrated components installed. There is no �type� label on the bottom of the carrier, but the components are similar in function to those of another carrier we have in inventory.
The first component is a �First Pulse Shutter� assembly similar to the one labeled �type 1031-2� on a different carrier. However it has been fully integrated with the other two components which include a safety shutter and a front mirror kinemetric mount.
Both shutters appear to be �gravity fail-safe� type rotary solenoids � if the solenoid loses power, the shutter flags automatically drop closed There is a warning light for safety shutter position indication. Shutter controller is not provided.
The kinemetric mount includes a standard US Laser R=90% at 1064nm mirror, part number USL 3403. Coating appears to be in perfect condition. Overall condition looks near-perfect. The only think I noted is that the beveled cowling for the laser beam baffle has broken away from the front of the carrier. This is an easily replaced component should it be deemed needed..
***MPN
***OEM US Laser
***SKU*** DP464 -
US Laser First-Pulse Shutter w/Safety Shutter
$100.00This US Laser standard optical bench carrier has three components installed. The first is a type 1031-2 �First Pulse Shutter� assembly, and the second is a combination Safety Shutter and Front Mirror kinemetric mount, type 1030-2-3..
Both shutters are �gravity fail-safe� type rotary solenoids � if the solenoid loses power, the shutter flags automatically drop closed. The flag appears to be missing from the external shutter. There is a warning light for safety shutter position indication. Shutter controller is not provided.
The kinemetric mount includes a standard US Laser R=90% at 1064nm mirror, part number USL 3403. Coating appears to be in perfect condition. Overall condition looks near-perfect.
***MPN 1031-2, 1030-2-3
***OEM US Laser
***SKU*** DP462 -
US Laser Q-Switch on US Laser Adjustable Carrier
$100.00U. S. Laser Q-switch, part # 1011-1, serial number 35118. Crystal is in perfect condition � no flaws to coatings and no straie. Two connections for coolant. Condition looks like new. Switch is installed on a US Laser optical bench carrier that has a vertical plane kinemetric adjustments in both elevation and azimuth. US Laser part number is 1009-1, serial number 36484 � described as a Q-Switch Mount. Optic axis is nominally 50mm above optical bench surface. All components are in near-new condition..
BMI Surplus, Inc. has a huge inventory of new, used, pre-owned &
recycled Lasers and Laser Accessories For Sale!Buy online or give us a call at 781-871-8868. We have experienced
customer service representatives standing by ready to help you!**Handlng & Freight fees depend on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier.We have 32 years of experience shipping sensitive scientific
instruments & industrial equipment. Be assured we ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 1011-1, 1009-1
***OEM US Laser
***SKU*** DP459 -
Control Laser Q-Switch on US Laser Adjustable
$100.00Control Laser Q-switch, model QS-108H, serial number 5159. Cavity is in perfect condition � no blemishes visible. Two connections for coolant. Switch is installed on a US Laser optical bench carrier that has a vertical plane kinemetric adjustments in both elevation and azimuth. US Laser part number is 1009-1, no serial number � described as a Q-Switch Mount. Optic axis is nominally 50mm above optical bench surface. All components are in excellent condition.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Laser Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN QS-108H
***OEM Control Laser
***SKU*** DP458 -
Control Laser Q-Switch on US Laser Adjustable
$125.00Control Laser Q-switch, type 201319, serial number 2203/105. Cavity is in perfect condition � no flaws visible. Four connections for coolant. Condition looks like new. Switch is installed on a US Laser optical bench carrier that has a horizontal plane kinemetric adjustments in both pitch and tilt. Optic axis is nominally 50mm above optical bench reference surface. All components are in near-new condition..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Laser Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 201319
***OEM US Laser
***SKU*** DP456 -
Kollmorgen Graduated Borescope Probe
$250.00Kollmorgen Borescope, (Electro-Optical Division). Borescope, Measuring Long Probe, Serial number 382.
Rigid probe housing, with right-angle mounted prism in probe tip (side window). Overall length of probe body is 550mm (21 5/8 inches). Distal end of probe is 0.370 inches (for 7.750 inches � steps up to .875 inches in diameter (that portion is 13 inches long, with a conical connection between the two diameters. Large diameter is graduated in inches, with divisions every 0.100 inch.
Right-angle viewing with illumination via fiber optics. Fiber optic armor-clad, with illumination centering puck on distal end. Active bundle diameter is 0.162 inches. Length of fiber optic lead is approximately six feet. Diameter of adapter at fiber bundle end is 1.560 inches.
Magnification adjustment ring marked �magnification factor�, graduated from 1 to 8.5 (with 10 divisions between numbers). Changing this setting seemed not so much to change the magnification but the focus point of the borescope. The borescope is missing the ocular (captive threaded ring is present, but the ocular is missing). Using an ocular from another instrument I determined that the closest focus point is about 4.5 inches away from the side mirror, and by adjusting the ring, I was able to focus to infinity. Therefore this instrument is for looking into cavities � you cannot focus on the wall of a bore that isn�t much larger than the diameter of the probe.
BMI Surplus, Inc. has a huge inventory of new, pre-owned & recycled Industrial Process Equipment For Sale!!
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
**Shipping, Handlng & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search!!
***MPN
***OEM Kollmorgen
***SKU*** DP451 -
Leitz Leica Ergoplan Z-axis Stop Mechanism
$200.00This is another �spare part� from a Leitz (Leica) Ergoplan semiconductor microscope. This module plugs into the left front of the microscope base. It is used to set the upper travel limit opto for the Z-axis (focus) drive of the microscope. The module consists of the external dress plate, the adjustment knob, the reck-and-pinion drive that carries the opto sensor, and the wiring harness which also includes a second bracket with a pair of limit switches..
The knob on the assembly is spring-loaded. In order to engage the pinion, the knob must be pressed inwards. Once the upper travel limit has been established (wafer chucks can be of widely differing heights) then the cover is secured to the knob to prevent accidental movement. Not only does the cover prevent the knob from being pressed inwards to engage the internal clutch, but there is a small cut-out in the knob which is meant to fit over the head of the Allen cap screw in the corner of the dress-plate. This prevents the cover from turning. This is a very useful spare part for Ergoplan users.
BMI Surplus, Inc. is your best resource for new, pre-owned,
recycled & refurbished microscopes and microscope components.
We will work with you individually to find the perfect
microscope for your application.Buy online or give us a call with any questions at 781-871-8868.
We’re here ready to help you!!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific instruments & industrial
equipment. We ship with the utmost care!***MPN
***OEM Leitz
***SKU*** DP440 -
Leitz (Leica) Plan Apo 150x D Microscope
$450.00Leitz (marked �Leitz Wetzlar Germany�) microscope objective for metallurgical instruments, of Plan Apochromatic correction. �Plan� objectives are corrected to display a perfectly flat image of up to 28mm in diameter, while Apochromat objectives are the most highly color corrected objectives available.
Magnification: 150x
Numerical Aperture: 0.90
Infinity corrected
Thread size 32mm
Must be used WITHOUT cover glass
Built-in annular condenser for dark field illumination
Red engraving denotes strain-free condition of optics (suitable for polarized light techniques, including interference contrast)
Working Distance:
Leica catalog number: 567 043The large thread size accommodates the darkfield illumination annular optics. This objective will only work on the more recent Leitz (and Leica Microsystems) microscopes that have 32mm diameter thread positions on the nosepiece. These include the DMR series instruments, the DM4000 through DM6000 instruments, as well as the earlier Leitz Ergoplan microscope.
The objective is in near-perfect condition, and the glass is flawless.
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN 567 043
***OEM Leitz
***SKU*** DP439 -
Leitz (Leica) PL Fluotar 20x D Microscope
Call 781-871-8868 for Price
Leitz (marked �Leitz Wetzlar Germany�) microscope objective for metallurgical instruments, of Plan Fluotar correction. �Plan� objectives are corrected to display a perfectly flat image of up to 28mm in diameter, while Fluotar objectives are highly color corrected (although not quite as good as the apochromats).
Magnification: 20x
Numerical Aperture: 0.45na
Infinity corrected
Thread size 32mm
Must be used WITHOUT cover glass
Built-in annular condenser for dark field illumination
Red engraving denotes strain-free condition of optics (suitable for polarized light techniques, including interference contrast)
Working Distance:
Leica catalog number: 567 016The large thread size accommodates the darkfield illumination annular optics. This objective will only work on the more recent Leitz (and Leica Microsystems) microscopes that have 32mm diameter thread positions on the nosepiece. These include the DMR series instruments, as well as the DM4000 through DM6000 instruments, as well as the earlier Leitz Ergoplan microscope.
The objective is in near-perfect condition, and the glass is flawless..
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN 567 016
***OEM Leitz
***SKU*** DP436 -
Leitz (Leica) PL Fluotar 10x D Microscope
Call 781-871-8868 for Price
Leitz (marked �Leitz Wetzlar Germany�) microscope objective for metallurgical instruments, of Plan Fluotar correction. �Plan� objectives are corrected to display a perfectly flat image of up to 28mm in diameter, while Fluotar objectives are highly color corrected (although not quite as good as the apochromats).
Magnification: 10x
Numerical Aperture: 0.25na
Infinity corrected
Thread size 32mm
Insensitive to cover glass correction
Built-in annular condenser for dark field illumination
Red engraving denotes strain-free condition of optics (suitable for polarized light techniques, including interference contrast)
Working Distance:
Leica catalog number: 567 015The large thread size accommodates the darkfield illumination annular optics. This objective will only work on the more recent Leitz (and Leica Microsystems) microscopes that have 32mm diameter thread positions on the nosepiece. These include the DMR series instruments, as well as the DM4000 through DM6000 instruments, as well as the earlier Leitz Ergoplan microscope.
The objective is in near-perfect condition, and the glass is flawless.
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN 567 015
***OEM Leitz
***SKU*** DP435 -
Leitz ICR Polarizer Insert 573 097 for Ergoplan
$480.00This is a polarizer slider for the Leitz (Leica) Ergoplan semiconductor microscope � it may fit other instruments as well. The Leitz part number is 573 097. The dimensions of the slider are 120mm in length, 28.5mm wide, and 11.5mm deep. There is a small bevel on the upper forward edge of the slide to prevent accidental insertion of the slide in the inverted position.
The slider consists of three elements. The first is the actual polarizing filter. Then there is a plate inserted in a cutout that appears to be a quarter-wave plate that is oriented so the permitted vibration directions are parallel to the analyzer and polarizer � in other words, no light is passed in that position. Then there is a third element opposite the polarizer. Behavior of the slider was similar whether it was upright or inverted � when an analyzer was placed in front of the slider and brought to the extinction position (no light transmission) and the slide was inverted, there continued to be zero transmission. The central plate also has a pair of set screws so it can be critically set.
I have been unable to figure out the function of these additional two plates. There was an earlier version of the Leitz reflected light interference contrast in which the polarizer could be rotated behind a fixed quarter-wave plate � this permitted a variation in the contrast without having to move the Wollaston prisms with respect to the optic axis, instead the polarizer is rotated behind the fixed quarter-wave plate. However, in the Ergoplan, the polarizer is fixed and the Wollastons are adjustable.
The slider is in near-perfect cosmetic condition, and the optical elements are in perfect condition.
BMI Surplus, Inc. is your best resource for new, pre-owned & refurbished microscopes and microscope components. We will work with you individually to find the perfect microscope for your application..
Buy online or give us a call with any questions at 781-871-8868. We’re here ready to help you!!!
**Shipping & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of shipping sensitive scientific & industrial equipment. We ship with the utmost care!
***MPN 573 097
***OEM Leitz
***SKU*** DP430 -
Laser Power Optics Copper Mirror, 10.6um
$175.00This item appears to be some sort of gold-coated CO2 laser beam direction mirror. It is marked as having a type �PO� coating, which I assume is a variant of the MaxR coating optimized for 10.6 micron wavelength (angle of incidence is not stated). Please see the first photo for the information label attached to the case…
There is a part number on the mirror � 7R028072-13 B. It is manufactured by Laser Power Optics and is secured in a protective container. The mirror appears to be new, and I could see no flaws in the surface. The shape is rather unusual � about 2.75 inches in diameter, but with one corner squared. There are three bolt positions..
***MPN 7R028072-13 B
***OEM Laser Power Optics
***SKU*** DP377 -
Fiber Optic Ringlight Illuminator, unmarked – 32
$100.00This is another fiber optic ringlight without any manufacturer�s marking, however it is very well made. Even the clamping screw is stainless steel set into a special stainless nut. The bundle is 32 inches long, and the input ferrule is a non-standard size (0.561 inch diameter and 0.500 inches long). The bundle is armored but does not have vinyl cladding.
The ringlight has an outer diameter of 3.325 inches and is 1.193 inches tall. The larger interior diameter is 2.289 inches, stepping down to 2.000 inches. There are three 10-32 tapped holes located near the base of the ringlight (one opposite the input ferrule, the other two at 90 degrees). I am not sure if they were meant for an accessory or if they were meant for another means of mounting, but they are blind holes about 3/8 inch deep.
The ringlight is in near-perfect condition � there are no fiber drop-outs, and everything is very clean.
Location MB 95
Photo set 755
***MPN
***OEM Custom
***SKU*** DP323 -
Fostec Fiber Optic Ringlight Illuminator
$135.00This is a Fostec fiber optic ringlight illuminator. The bundle length is 30 inches (ferrule to ferrule), and the bundle is armored and vinyl clad. The input ferrule is stepped � the smaller and shorter diameter is 0.625 inches and 0.240 inches long. The larger diameter is 0.715 inches with a length of 0.475 inches. Largest diameter of the ferrule is 0.868 inches.
The ringlight has an outside diameter of 3.485 inches. The overall height of the ringlight is 1.066 inches. The larger internal diameter is 2.600 inches, with a step down to 2.370 inches. There is a small groove on the light exit side of the ring onto which may be placed a rotating polarizer foil (not included). The ringlight does not have any means of directly fastening to the microscope (no set screws).
In order to fasten to the microscope another ring is attached to three threaded holes on the top of the ringlight. This attachment ring is missing from this particular ringlight..
These ringlights are in superb condition.
Location MB 95
Photo set 754
BMI Surplus, Inc. has a huge inventory of new, pre-owned,
recycled & refurbished Microscopes, Microscope Parts &
Microscope Components For Sale. We will work with you
individually to find the perfect microscope or microscope parts
for your application.
Buy online or give us a call with any questions at 781-871-8868.
We have experienced customer service representatives standing by
ready to help you!
**Shipping, Handling & Freight fees are dependent on your
location. We will provide a freight quote to meet your
individual needs and work with you if you prefer to use your own
carrier. We have over 30 years of experience of shipping
sensitive scientific instruments & industrial equipment. We ship
with the utmost care!Don’t see what you are looking for? Use our orange search box on
the top right hand corner of this page to customize your search.
***MPN
***OEM Fostec
***SKU*** DP322 -
FS Gooseneck Fiber Optic (Threaded Ferrule)
$60.00This is an unusual fiber optic gooseneck. The output ferrule is threaded for a length of 1.50 inches and there is a locking nut on the ferrule. The threads mate with special collector lenses which are focused by where they are positioned on the thread, and locked in place using the nut. There is no manufacturer�s mark on this bundle, however we have a bifurcated bundle with identical fittings � it has a manufacturer�s mark on the base which consists of an elided F and S (Fostec / Schott?), but no other marks.
The input ferrule is 0.623 inches in diameter. There is no flat milled into the ferrule, presumably because it doesn�t matter what orientation it is secured in. The length of the input ferrule is 1.5 inches.. The overall length of the bundle is 26 inches.
This is a very nicely constructed bundle � the arm stays where it is placed and there is no fiber drop-out. The ferrule ends are also very nicely finished. Condition is superb.
Location MB 90
Photo set 748
***MPN
***OEM F/S
***SKU*** DP316
