Showing 1621–1640 of 8540 results
-
Hewlett Packard 10722A Converter Window, 1st
$155.00This is an HP 10722A Plane Mirror Converter window. It consists of a glass wedge that allows mounting a 10702A Linear Interferometer in a fixed position with a retroreflector attached to the moving component of a stage. It is a component in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The window is attachable to the 1.5� size interferometer bodies.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included. The only cosmetic issue with this particular window is the missing HP label with the nomenclature, hence the slightly lower price.
***MPN HP 10722A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP075 -
Hewlett Packard 10722A Converter Window, 1st
$150.00This is an HP 10722A Plane Mirror Converter window. It consists of a glass wedge that allows mounting a 10702A Linear Interferometer in a fixed position with a retroreflector attached to the moving component of a stage. It is a component in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The window is attachable to the 1.5� size interferometer bodies.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10722A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP074 -
HP 10702A Linear Interferometer 1st Grade
$225.00This item is an HP 10702A Linear Interferometer with one HP 10703A. Retroreflector and one HP 10722 Converter Window attached. A second reflector is not included. This is the basic interferometer in the 1.5� cube factor. It consists of a polarizing beam-splitter and the corner-cube reflector. One interferometer and one detector are required for each axis in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The addition of the compensating converter window allows a second retroreflector to move relative to the fixed interferometer body..
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10702A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP073 -
HP 10702A Linear Interferometer 1st Grade
$300.00This item is an HP 10702A Linear Interferometer with one HP 10703A Retroreflector attached. No converter window or second reflector is included. This is the basic interferometer in the 1.5� cube factor. It consists of a polarizing beam-splitter and the corner-cube reflector. One interferometer and one detector are required for each axis in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus.
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN HP 10702A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP072 -
HP 10715A Differential Interferometer
$1,200.00HP 10715A Differential Interferometer
HP 10715A Differential Interferometer, new in the original packing. It is one of the more elaborate interferometers using the 1.5� cube form factor. These components belong to the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The interferometer includes a special diagonal beam-splitting window which I have not figured out � it may be some sort of phase shifting plate to turn the plane of polarization. The interferometer includes a special magnetic target disk used in the initial setup of the device. It includes two retroreflector modules and a converter window, but attached to the opposite side from the converter, is another module with a right-angle beam-splitter with two exit ports on each side, marked �A� and �B�. There appears to be a quarter-wave plate between the main interferometer body and the second beam splitter. I have no idea how the diagonal mirror is used. . .
Slight chip on unused portion of the reference mirror.
Again, this is new in the box. I believe this component would benefit from the use of the large leveling base (HP 10711A). The only mounting faces are the opposite sides of the main interferometer body.
***MPN HP 10715A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP070 -
HP 10702A Linear Interferometer Options
$350.00HP 10702A Linear Interferometer with Options 001
This item, while missing the original HP label, has been identified as a type 10702A Linear Interferometer. The interferometer body has been scribed with the original beam-path schematic diagram found on the original label. This is one of the �medium-sized� components in the Hewlett-Packard Laser Interferometer Distance Measurement Apparatus. The central cube is 1.5� square. On one side of the beam-splitter is a type HP 10703A Retroreflector, and on the opposite side, a type HP 10724A Plane Mirror. This interferometer is equipped with the Option 001 � a type HP 10722 Converter Window. None of the components have the original labels.
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a large leveling base (HP 10711A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams.
These components have been removed from various fixtures. They have been classified as second quality because of the missing labels as well as the rather crudely scribed schematics. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear in very fine condition, although not new. Unlike new components, no hardware is included.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN HP 10702A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP068 -
Hewlett Packard 10567A Beam Splitter, 1st Grade
$195.00This item is an HP 10567A Dual Beam Beam-Splitter. This is a rather elaborate component in the Hewlett-Packard Laser Interferometry Dimensional Measurement System. It is intended for use with two axis stages. There is a single 45-degree diagonal mirror mounted within the block, but it is not face-centered. The mirror has three �zones� of reflectance (or transmission), and three apertures on the side of the block facing the laser source. The lowest aperture is uncoated so the entire beam passes straight through the block The central aperture is where the source laser enters the block. The substrate at that point has a 50% coating, so half of the energy is reflected to the top on the block, and the remainder passes straight through. The upper aperture (on the side facing the laser) has a 100% mirror � all the light flux is diverted at right angles.
The outer two apertures on the side facing the laser are intended for the return beams from the interferometer bodies in each axis. The receivers may be placed on the same side of the block as the laser source. This is very useful when there are space constraints.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10567A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP064 -
HP 10565A Remote Interferometer
$450.00This is an HP 10565A Remote Interferometer. It is one of the major components in the Hewlett-Packard Laser Interferometer Measurement System. It is based on the larger 2� cubes, and uses a 1.4� square bolt pattern for mounting. The interferometer includes the matching retroreflector (HP 10556A). The remaining three entry / exit faces of the cube appear to have � lambda plates installed within them. I believe this is the standard configuration for the interferometer. No other reflectors (retro- or mirror) are included.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!***MPN HP 10565A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP063 -
Hewlett Packard 10700A 33% Splitter
$105.00This item is an HP 10700A 33% Beam Splitter. It is a basic component of the Hewlett Packard Laser Interferometry Distance Measuring Apparatus. It is one of several components based on a 1� steel cube. The cube has a beam-splitting reflector set at 45-degrees and face-centered to three adjacent faces. The mirror surface is coated. These components are useful when it is desired to have three axes tied to a single laser (each axis will require its own interferometer and detector, however). The first beam-splitter in the system would be the 33% splitter, leaving roughly 66% of the beam to travel to a second 50% beam-splitter for the other two axes. In that manner each receiver will be working at approximately the same power level.
, 2nd Grade
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a small leveling base (HP 10710A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams. Beams can be deflected through an aperture in the base of the mount for utmost versatility.These components have been removed from various fixtures. They meet our requirements for second quality used interferometer components. All optical surfaces are free of serious blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear in very fine condition, although not new. Unlike new components, no hardware is included.
***MPN HP 10700A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP058 -
Hewlett Packard 10700A 33% Splitter, 1st Grade
$105.00This item is an HP 10700A 33% Beam Splitter. It is a basic component of the Hewlett Packard Laser Interferometry Distance Measuring Apparatus. It is one of several components based on a 1� steel cube. The cube has a beam-splitting reflector set at 45-degrees and face-centered to three adjacent faces. The mirror surface is coated. These components are useful when it is desired to have three axes tied to a single laser (each axis will require its own interferometer and detector, however). The first beam-splitter in the system would be the 33% splitter, leaving roughly 66% of the beam to travel to a second 50% beam-splitter for the other two axes. In that manner each receiver will be working at approximately the same power level.
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a small leveling base (HP 10710A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams. Beams can be deflected through an aperture in the base of the mount for utmost versatility.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10700A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP057 -
Hewlett Packard 10701A 50% Splitter
$95.00This item is an HP 10701A 50% Beam Splitter. It is a basic component of the Hewlett Packard Laser Interferometry Distance Measuring Apparatus. It is one of several components based on a 1� steel cube. The cube has a beam-splitting reflector set at 45-degrees and face-centered to three adjacent faces. The mirror surface is coated. These components are useful when it is desired to have two axes tied to a single laser (each axis will require its own interferometer and detector, however).
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a small leveling base (HP 10710A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams. Beams can be deflected through an aperture in the base of the mount for utmost versatility.
These components have been removed from various fixtures. They meet our requirements for second quality used interferometer components. All optical surfaces are free of serious blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear in very fine condition, although not new. Unlike new components, no hardware is included.
***MPN HP 10701A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP056 -
Hewlett Packard 10701A 50% Splitter,
$90.00This item is an HP 10701A 50% Beam Splitter .It is a basic component of the Hewlett Packard Laser Interferometry Distance Measuring Apparatus. It is one of several components based on a 1� steel cube. The cube has a beam-splitting reflector set at 45-degrees and face-centered to three adjacent faces. The mirror surface is coated. These components are useful when it is desired to have two axes tied to a single laser (each axis will require its own interferometer and detector, however).
The angle of the beam-splitter is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam-splitter is fixtured using a small leveling base (HP 10710A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams. Beams can be deflected through an aperture in the base of the mount for utmost versatility..
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.***MPN HP 10701A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP055 -
Hewlett Packard 10707A Beam Bender
$70.00This item is an HP 10707A Beam Bender.It is a basic component of the Hewlett Packard Laser Interferometry Distance Measuring Apparatus. It is one of several components based on a 1� steel cube. The cube has a fully-reflecting 45-degree mirror face-centered to two adjacent faces. The mirror surface is coated…
The angle of the mirror is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam bender is fixtured using a small leveling base (HP 10710A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams. Beams can be deflected through an aperture in the base of the mount for utmost versatility.
These components have been removed from various fixtures. They meet our requirements for second quality used interferometer components. All optical surfaces are free of serious blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear in very fine condition, although not new. Unlike new components, no hardware is included.
2nd Grade
BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of experience shipping sensitive scientific instruments & industrial equipment!
***MPN HP 10707A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP053 -
Hewlett Packard 10707A Beam Bender, 1st Grade
$90.00This item is an HP 10707A Beam Bender.It is a basic component of the Hewlett Packard Laser Interferometry Distance Measuring Apparatus. It is one of several components based on a 1� steel cube. The cube has a fully-reflecting 45-degree mirror face-centered to two adjacent faces. The mirror surface is coated.
The angle of the mirror is not critically set within the cube in order to keep component prices reasonable. For precise positioning it is recommended that the beam bender is fixtured using a small leveling base (HP 10710A). These mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture. Beams should ONLY be deflected at right angles in each laser / detector assembly in order to avoid depolarization of the laser beams. Beams can be deflected through an aperture in the base of the mount for utmost versatility.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All optical surfaces are free of blemishes and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new components, however, no hardware is included.
***MPN HP 10707A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP052 -
Hewlett Packard 10710A Leveling Mount, 1st Grade
$40.00This item is a Hewlett Packard HP 10710A Small Leveling Mount. It is used with the smaller reflective components in their Laser Interferometry Distance Measuring Apparatus. The mounts allow for corrections in two directions. Pitch may be adjusted through several degrees about the axis of the mirror component by resetting the cradle position in the base, and yaw may be adjusted using the play in the elongated slots for securing the base. The base of the mount has an open aperture so the beam path may be directed through the base of the fixture.
Dimensions of the base are as follows..
Height = 0.5�
Width = 1.1�
Length = 1.85�
Through-bore in base = 0.5�.
These components have been removed from various fixtures. They meet our requirements for first quality used interferometer components. All mechanical adjustments work smoothly and there are no gouges or distortions in any of the parts that would in any way impede accuracy of measurements. Cosmetically these components appear only lightly used, if not new. Unlike new mounts, however, no hardware is included other than the two screws used to secure the cradle to the base.
Location W7-A
Photo set 483
***MPN 10710A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** DP050 -
Newport Model 840 Optical Power Meter
$300.00This is a Newport Model 840 Optical Power Meter in excellent condition. It does not include any accessories other than the hard case shown. The detector will need to be purchased separately. Upon power-up, display is as shown in the photograph.
This version of the meter uses the rechargeable NiCad pack � the battery pack is brand new, but the charger will need to be sourced elsewhere. The tilt bail on the meter back is not present.
This item is untested.
***MPN Model 840
***OEM Newport Research Corp (NRC)
***SKU*** 14108 -
Insp L Objective from Small Nikon Profile
$20.00This is a specialized objective lens taken from a modest-sized Nikon Profile projector. It is engraved merely ‘Insp. L.’ – no magnification or any other marks on the lens. The projector was woefully incomplete and was parted out some time ago.
Cosmetic condition of the barrel is very good – however the lens itself does suffer from numerous fine scratches from careless cleaning (last photo shows them much more pronounced than they actually are – the wonders of digital photography). The objective thread is 28.1 mm in diameter – rather odd. . . � We are also offering the other objectives from this projector as well as the original turret. Please check our other listings.
Location MB 27
Photo set 243
***MPN
***OEM Nikon
***SKU*** 3431 -
Klinger / Micro-Controle MR80.25 Linear Stage, no
$120.00This is a model MR80.25 linear translation stage. This listing is for the stage only � it does not include any actuator spindle. The stage runs on opposing single-row ball bearings in captive cages. Klinger model number including the spindle is 338 070. These stages differ from the MRS stages in that they do have restoring springs installed and one of the two end plates is threaded to receive a micrometer spindle.
Overall length of upper platform � 92mm
Overall width of upper platform � 80mm
Height of platform � 18.5mm
Fixed mounting plate 0.5mm proud of moving platform
Fixed platform area � 53mm long by 53.6mm wide
Aperture clearance � 35mm diameter
Straightness � better than 200 micro radiansThe stage is in excellent condition both mechanically and cosmetically.
Location MB 121
Photo set 857
***MPN MR80.25 (part)
***OEM Klinger Scientific
***SKU*** 2324 -
Oriel 17701 Adjustable 2 inch Mirror Mount
$210.00This is a Oriel 17701 Adjustable 2 inch Mirror Mount.
This item is an Oriel High Precision Mirror Mount, model 17701. The mount will accept mirrors of 50mm diameter and up to � inch thickness. There are two orthogonal motions that are completely independent of each other. The range of motion is 4 degrees for each axis. The controls are side mounted so it is easy to adjust them without disturbing the optical path. Sensitivity (resolution) for each axis is 0.1 arc seconds. The mounts are very temperature stable – the leadscrew for adjustment of the axes are designed with a similar coefficient of expansion to the aluminum used in the mounts themselves.
The mirror mount is only about 5 1/8� wide including the adjustment knobs. Clear aperture with the mount at a 45 degree angle is 0.55�.
This mounting is in very fine condition – both axes work perfectly. The mounts may have signs of modest use.
Photo set 1630.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Mirror Mounts for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling and Freight fees are dependent on your location..
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 17701
***OEM Oriel Corp
***SKU*** 2020 -
Tropel 9000 Laser Interferometer
Call 781-871-8868 for Price
This is a Tropel Model 9000 laser interferometer. It is used for checking the flatness of wafers and masks up to 5 inches in diameter. It uses a HeNe laser as a monochromatic source, and has a built-in video camera for fringe display on a Sony Black & White monitor.
The interferometer is in spectacular condition with the exception of a small scratch near the upper center of the reference prism (outside the field of view of all but the largest wafers). The wafers are held in place by a vacuum chuck and fringe spacing and direction is adjusted via three very fine setting screws located to either side and beneath the chuck holder.
The interferometer includes the following chucks:
� 2 inch vacuum chuck
� 3 inch vacuum chuck
� 4 inch vacuum chuck
� 5 inch ‘bow’ chuck***MPN Model 9000
***OEM Tropel
***SKU*** 17698
