-
$85.00
The rotating platform will bolt to the carriers for the Newport Heavy-Duty Rods (rod clamp 340-RC is particularly suited). All bolt holes, clearance holes, and slots are intended for use with �-20 hardware. The circular slot allows positioning throughout a 360 degree range depending on the arrangement of the clamping screw and the axis pivot screw.
Width � 4.25 inches
Length � 3.00 inches
Height, overall � 1.75 inches
Exceptionally rigid aluminum casting with precision finished surfaces five sides
The platforms are in perfect condition.
Location MB 119
Photo set 847
***MPN 34
***OEM Newport Research Corp (NRC)
***SKU*** DP411
-
$550.00
Klinger (Newport / Micro Controle) motorized linear translation stage with way covers, UT100-50-0.1um. Stage part number with motor is 354 455 � encoder is separately numbered 385 922.
Specifications include:
105x180mm base
32mm table height (table is 0.5mm proud of enclosure frame)
Table is 76mm wide, 78mm long
Motor mount adds 139mm to length
Nominal vertical load capacity 20 kgF
Top surface of table has 63mm square M4 bolt pattern that is compatible with module 80 systems. Stage enclosure may be mounted to other surfaces either by captive M4 screws, M4 threads, or via bridles using slots milled into either side of the enclosure. Base of enclosure has two square face-centered bolt patterns, a 63mm M4 for module 80 systems, and a 92mm M5 for module 120 systems.
Includes Motor UE30CC with 10,000 pt/rev. encoder 385 922. Also, on the nomenclature label is the following information – B94 84162 003, Orig. 00, Encoder 5v, wiring KL Motor UE30CC. 50mm travel.
Mint condition.
Location MB 118
***MPN UT100-50-0.1, UE30CC
***OEM Klinger Scientific
***SKU*** DP408
-
$300.00
This is a Newport stage with cross-roller bearings for very high-resolution positioning, low-runout, and large load capacity. These stages do not have the external locking plate installed. The actuator holder and bearing pad holder are both stainless steel, the latter with a hardened carbide insert. Actuator holder and bearing pad holder may be placed on either side of the stage for a choice of right or left-handed operation. Newport model number is 426A.
Travel � 1 inch
Load capacity � 73 pounds
Material � aluminum
Side-driven drive
Angular deviation � less than 150 urad
Stage dimensions � 3.50 inches square
Stage height � 1.00 inches
Additional 1.11 inches for actuator and bearing holder width
Aperture � 2 inches, unobstructed over 0.625 inches travel
The stages are in near-perfect condition, however, the elongated opening of the base has been slightly extended on one side (about 1/16 inch). See second photo. As noted above, locking plate has been removed.
The stages include a 100 TPI hex drive screw actuator assembly. The distal end of the screw is lightly marked by a set screw having been used to secure a drive linkage, since removed. (See photo).
***MPN 426A mod
***OEM Newport Research Corp (NRC)
***SKU*** DP406
-
$220.00
This is a Newport stage with cross-roller bearings for very high-resolution positioning, low-runout, and large load capacity. These stages do not have the external locking plate installed. The actuator holder and bearing pad holder are both stainless steel, the latter with a hardened carbide insert. Actuator holder and bearing pad holder may be placed on either side of the stage for a choice of right or left-handed operation. Newport model number is 426A.
Travel � 1 inch
Load capacity � 73 pounds
Material � aluminum
Side-driven drive
Angular deviation � less than 150 urad
Stage dimensions � 3.50 inches square
Stage height � 1.00 inches
Additional 1.11 inches for actuator and bearing holder width
Aperture � 2 inches, unobstructed over 0.625 inches travel
The stages include a 100 TPI hex drive screw actuator assembly. The distal end of the screw is lightly marked by a set screw having been used to secure a drive linkage, since removed. (See photo).
The stages are in near-perfect condition. As noted above, locking plate has been removed.
***MPN 426A
***OEM Newport Research Corp (NRC)
***SKU*** DP405
-
$20.00
This is a FC type mount for appropriately terminated fiber optics in the Thorlabs SM1 connector thread series (1.035� � 40).
The mounting plates are in superb condition and functionally perfect.
The listing is for a single mounting plate. Thorlabs part number is SM1FC.
***MPN SM1FC
***OEM Thorlabs
***SKU*** DP404
-
$70.00
Siskiyou Component Tilt Tip Kinematic Mirror Mount 1 inch IVM100/K Soft Knobs New
Kinematic Mirror Mount
This is a superbly made 1� optical component mount. True orthogonal adjustment in both elevation and azimuth is possible with zero cross-talk between the adjustments. These mounts are standardly supplied with the mounting foot and hex adjustment screws (5/64 inch wrench). In addition, these mounts include a special plate with foam pad so the holders may be installed within a dust-resistant enclosure while retaining access to the azimuth and elevation adjustments. Seals add approximately 0.10 inches to height of holder.
Additionally, these mounts have the optional �soft knobs� installed on the top of the actuator screws. In addition to the soft collar for easy adjustments, there are capstan holes located around the top of the knob.
Travel, each axis — plus or minus 4 degrees
Minimum controllable motion — 3.8 arc seconds
100 TPI adjustment screws (hex head)
Maximum height –4.07 inches
Height of holder — 3.1 inches (less actuators)
Width — 2 inches
Depth of foot — 1.48 inches
Optic axis height — 1.5 inches (including foot)
1″ optic bore with two nylon-tipped set screws
Siskiyou model number — IVM100
New in the original bubble-wrap bags � cosmetically and functionally perfect..
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled & refurbished optical equipment, optical tables, laser
tables, vibration isolation systems, legs and bases. We will
work with you individually to find the perfect set up, for your
application.
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific & industrial equipment.
We ship with the utmost care!
***MPN IVM100/K – seal
***OEM SD Instruments / Siskiyou
***SKU*** DP402
-
$60.00
Kinematic Mirror Mount
Siskiyou 1 inch Component Tip Tilt, IVM100/K Soft Knobs.
Tip Tilt Mount,
This is a superbly made 1� optical component mount. True orthogonal adjustment in both elevation and azimuth is possible with zero cross-talk between the adjustments. These mounts are standardly supplied with the mounting foot and hex adjustment screws (5/64 inch wrench). In addition, these mounts include a special plate with foam pad so the holders may be installed within a dust-resistant enclosure while retaining access to the azimuth and elevation adjustments. Seals add approximately 0.10 inches to height of holder.
These mounts have the optional �soft knobs� installed on the top of the actuator screws. In addition to the soft collar for easy adjustments, there are capstan holes located around the top of the knob.
Travel, each axis — plus or minus 4 degrees
Minimum controllable motion — 3.8 arc seconds
100 TPI adjustment srews (hex head)
Maximum height –4.07 inches
Height of holder — 3.1 inches (less acutators)
Width — 2 inches
Depth of foot — 1.48 inches
Optic axis height — 1.5 inches (including foot)
1″ optic bore with two nylon-tipped set screws
Siskiyou model number — IVM100.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!!
***MPN IVM100/K
***OEM Siskiyou
***SKU*** DP401
-
$70.00
Siskiyou 1 inch Component Tilt Tip, Kinematic Mount Allen Hex IVM100 with seal
Tip Tilt Mirror mount, Kinematic mount
1 inch .
This is a superbly made 1� optical component mount. True orthogonal adjustment in both elevation and azimuth is possible with zero cross-talk between the adjustments. These mounts are standardly supplied with the mounting foot and hex adjustment screws (5/64 inch wrench). In addition, these mounts include a special plate with foam pad so the holders may be installed within a dust-resistant enclosure while retaining access to the azimuth and elevation adjustments. Seals add approximately 0.10 inches to height of holder.
Travel, each axis — plus or minus 4 degrees
Minimum controllable motion — 3.8 arc seconds
100 TPI adjustment srews (hex head)
Maximum height –4.07 inches
Height of holder — 3.1 inches (less acutators)
Width — 2 inches
Depth of foot — 1.48 inches
Optic axis height — 1.5 inches (including foot)
1″ optic bore with two nylon-tipped set screws
Siskiyou model number — IVM100
Component mounts are in near-new condition � generally the only evidence of previous use are the light impressions made within the counterbores of the mounting foot. The mounts are in perfect functional condition.
Location H4L4 B16
Photo set 836.
BMI Surplus, Inc. is your #1 resource for optical equipment, optical tables legs and bases. We will work with you individually to find the perfect set up, for your application.
Buy online or give us a call at 781-871-8868. We’re here ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of shipping sensitive scientific & industrial equipment. We ship with the utmost care!
***MPN IVM100
***OEM Siskiyou
***SKU*** DP400
-
$35.00
This is a sodium chloride window. Unable to check condition of the surface because it is wrapped within tissue. It should be assumed that the surface will probably need light repolishing.
Material � NaCl
Diameter � 1.25 inches
Thickness � 0.25 inches
Focal Length � flat window
Surface finish � unable to check
Container � wrapped in tissue within sealed plastic bag with desiccant tube
***MPN
***OEM
***SKU*** DP393
-
$30.00
Sealed bag contains four sodium chloride optical window blanks. Windows are the better selected pieces from large lot stored in petri dish without desiccant. They will need to be polished both sides.
Material � NaCl
Diameter � 0.5 inches
Thickness 2mm
Focal Length � flat window
Surface finish � mostly clear, but some surface damage
Container � plastic bag containing four pieces, not individually wrapped, no desiccant
***MPN
***OEM
***SKU*** DP391
-
$40.00
Sodium Chloride crystal window, 50mm long, 25mm wide, and 6mm thick. Crystal is sealed in plastic bag (two desiccant tubes in bag). Crystal is wrapped in tissue and could not be examined without opening. Like most salt windows, it should be assumed that this may need to be repolished. This lot consists of one crystal window.
Material � NaCl
Dimensions 50mm x 25mm
Thickness � 6mm
Focal Length � flat window
Surface finish � could not evaluate � crystal wrapped in tissue inside sealed bag.
Container � sealed plastic with paired desiccant tubes inside
***MPN
***OEM
***SKU*** DP389
-
$30.00
Sodium Chloride window, 36mm in diameter, 9mm thick. There is a significant fracture on one edge of the crystal approximately 14mm wide, and extending about 6mm from the edge. You will probably wish to repolish one side. Window was in unsealed bag with desiccant. Part number on padded envelope is #03609.
Material � NaCl
Diameter � 36mm
Thickness � 9mm
Focal Length � flat window
Surface finish � very lightly etched on one side, other side appears blemish-free
Container � cotton-padded cloth sleeve pouch with desiccant container.
***MPN
***OEM
***SKU*** DP386
-
$80.00
This is a very large sodium chloride crystal window. Crystal has been bumped � there is a significant fracture in one corner that extends approximately 6mm diagonally into the plate, otherwise the window appears unflawed. This lot consists of one crystal window.
Material � NaCl
Dimensions 50mm x 40mm
Thickness 20mm
Focal Length � flat window
Surface finish � visually perfect � significant flaw in one corner (see photo)
Container � sealed plastic bag without desiccant
***MPN
***OEM
***SKU*** DP385
-
$119.00
This is a very large sodium chloride crystal window.
Material: NaCl
Dimensions: 50 x 40mm
Thickness: 20mm
Focal Length: flat window
Surface finish: visually perfect � very minor corner flaws (less than 0.5mm)
Container: sealed plastic bag includes desiccant
***MPN
***OEM
***SKU*** DP384
-
$40.00
This is an individual crystal sodium chloride window. The windows show trace evidence of adhesion to the tissue that wrapped them..
Material � NaCl
Dimensions 38mm x 19mm
Thickness 4mm
Focal Length � flat window
Surface finish � very lightly etched
Container � plastic bag individually wrapped in tissue, without desiccant
***MPN
***OEM
***SKU*** DP383
-
$50.00
This is a quantity of three sodium chloride windows. All of the windows show some adhesion to the tissue that wrapped them, one a bit worse than the others. They will need to be repolished both sides.
Material � NaCl
Dimensions 38mm x 19mm
Thickness 4mm
Focal Length � flat window
Surface finish � moderately etched
Container � plastic bag individually wrapped in tissue, without desiccant
***MPN
***OEM
***SKU*** DP382
-
$60.00
This lot consists of two windows of an unknown salt crystal. They are suspended inside fiberboard tubes by slightly smaller tubes inserted into either side of the larger tube. I did not wish to remove the tubes, so I can only guess at the thickness, being on the order of 0.15 to 0.25 inches. The diameter is less than 1.6 inches, and may be as small as 1.550 inches. The crystal windows are in excellent condition � I could not detect any degradation. The outer tubes are lined with desiccant packages. There appear to be two identical windows � unfortunately, no markings as to compound, or dimensions. Listing includes both pieces.
Material � Unknown
Diameter 1.6 inches
Thickness 0.15 � 0.25 inches
Focal Length � flat window
Surface finish � visually excellent
***MPN
***OEM
***SKU*** DP381
-
$200.00
This is a large window of an unknown salt crystal.
Material � Unknown
Diameter = 2.158 inches
Thickness = 0.25 inches
Focal Length � flat window
Surface finish � visually superb
Container � tissue wrap without desiccant
Location MB 112
Photo set 814.
Salt window only.
Micrometer in photo is NOT included..
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Optical Windows & Flats for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Custom
***SKU*** DP379
-
$30.00
Large KBr salt crystal window with surface flaws (caliper not included)
Material � Potassium Bromide
Diameter 1.6 inches
Thickness 0.17 inches
Focal Length � flat window
Surface finish � strongly etched, (with foreign contaminants?)
Container � Plastic box with tissue lining, no desiccant.
This crystal will need to be repolished � one face appears to have some contaminants on the surface, the other face is lightly etched. Box is marked �KBy� but outside edge of crystal is correctly marked KBr.
***MPN
***OEM
***SKU*** DP378
-
$400.00
This is a very nice selection of Ealing neutral density filters. All the filters are 50mm in diameter, five of which have plastic cells. Clear aperture of the filters within the cells is 40mm. The filters appear to have a quartz substrate (they are very light, and Ealing typically used quartz for their reflective neutral density filters). Two filters do not have the plastic rings, nor is their any indication of transmission directly on the filters, however there are labels in the cabinet that match the transmission characteristics observed in the filters.
The list of filters includes
ND 0.1 � no cell, reflective type
ND 0.3 � in Ealing Cell, reflective type
ND 0.6 � in Ealing Cell, reflective type
ND 1.0 � in Ealing Cell, reflective type
ND 2.0 � in Ealing Cell, reflective type
ND 3.0 � in Ealing Cell, reflective type
ND 4.0 � no cell, reflective type, sandwiched
All of the filters are in perfect condition with the exception of the ND 3.0, which appears to have several microscopic pin-holes. There is also a darkish blemish on the surface of the filter (visible in the third photo), but this does not seem to show up in transmitted light. The filters are supplied in a nice fitted walnut cabinet with elastic retaining bands. There are no transmission curves for any of the filters.
BMI Surplus, Inc. is your #1 resource for new, pre-owned &
refurbished optical equipment, optical tables, laser tables, legs and bases. We
will work with you individually to find the perfect set up, for
your application.
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific & industrial equipment.
We ship with the utmost care!!
***MPN
***OEM Ealing / Beck
***SKU*** DP372