-
$550.00
The Kensington 4000 A 3-axis controller is designed to work with various Kensington stages and robotic fixtures. This early iteration of the controller will accept up to three axis driver cards and can be configured with multiple user and I/O interfaces. The controller is highly modular and consists of a 250w switching power supply module, the mother board, the controller processor board, and the optional axis driver cards (one devoted to each axis of motion).
Optional controller items include an IEEE-488 interface, a second RS232C interface, and an operator interface connector. The axis boards also can be configured with an optional counter / lock piggy-back board. This instrument is configured as follows:
X-Axis card
Serial number: 86 191 01
Two axis board power transistor pairs and harnesses present
RS232-C and Operator Interface connectors
The axis boards are generic but have to be matched to the individual stage elements by using trim pots on the board. Each axis motion system typically includes a DC motor, a DC tachometer, and a position encoder. Equipment needed for calibration / matching is rudimentary � a terminal connected to the Main Port Interface, and a 10MHz oscilloscope capable of displaying X-Y Lissajous patterns.
We will include a copy of the Kensington 4000 instruction manual. This manual covers installation as well as axis board calibration and matching the axis boards to the stages / fixtures involved. The controller differs from later units in that the mother board will only accept three axis cards. It is in very good condition. It is in the bench-top configuration (includes feet, but lacks rack-ears).
Location A5 L2
Photo set 1010
***MPN Model 4000A
***OEM Kensington
***SKU*** DP562
-
$790.00
We pride ourselves in the quality and value of our optical tables.
This is a complete Pacific Precision Laboratories (PPL) linear motorized stage, model P6-04, serial number 061. The stage is massive (40 pounds) and runs on THK cross-roller bearings. The stage includes an auxiliary mounting plate on the table top, and an externally mounted Heidenhein optical encoder.
Stage base dimensions � 12 by 15 inches
Stage height � 3.212 inches (including auxiliary plate)
Stage travel � 6.25 inches
Weight � 39.8 pounds
Lead screw diameter and pitch � 0.500 by 0.10 inches
Table surface � 12 by 12 inches, chamfered edges
Compumotor M57-83 installed (with manual control knob)
Heidenhein scale model LS403 � 001 R07F 170 installed.
Opto sensor limit switches (three � one home position?)
The stage is in superb condition. The only component missing is the aluminum dress cover for the leadscrew and limit switches.
***MPN Model P6 O4
***OEM Precision Pacific Laboratories (PPL)
***SKU*** DP548
-
$195.00
We pride ourselves in the quality and value of our optical tables. Please contact us for the best pricing by phone or by clicking the �Ask us a question� link above.
This is the better portion of a large Precision Pacific Laboratories Model P6 04 linear translation table. The cross-roller assembly is complete (less two end cap screws on the THK bearings) and the table casting is complete. There are some minor marks on the upper platform but nothing serious.
The leadscrew is missing, as is the leadscrew nut and holder. There is a position for which to mount a NEMA 23 motor as well as a DB9 connector for the limit switch sense. Stage travel is greater than 6 inches.
Stage dimensions are:
Width � 12 inches (direction of motion)
Length � 15 inches
Height � 2.75 inches
Weight � 29 pounds
Load Bearing � unknown
Stage is in excellent condition insofar as the parts that are present.
Location H3 R2
Photo set 994
***MPN P6 04
***OEM Precision Pacific Laboratories (PPL)
***SKU*** DP547
-
$650.00
This is a Daedal 110000 series linear table with 8 inches travel. It uses non-recirculating ball-bearing races and motion is imparted by a 0.20 inch pitch leadscrew. Model number is 110081S20E.
Stage base dimensions � 10 by 12 inches
Travel � 8 inches
Table dimensions � 10 by 12 inches
Stage height � 3 inches
NEMA 23 Slo-Syn Motor, Type M063-FD09
Load bearing � 140 pounds (horizontal); 40 pounds vertical
10 stainless steel �-20 thread inserts in table top
Table is in excellent condition. No manual control of leadscrew, but by turning the motor coupling we confirmed that stage motion was smooth throughout range. Motor has 6-pole Jones plug attached. We have no means of determining if this is the �standard� or �precision� accuracy version of the stage, so the model number reflects the former.
***MPN
***OEM Daedal
***SKU*** DP546
-
$1,400.00
This is a Kensington linear motorized stage with 12 inches of motion. It uses cross-roller bearings for very large load bearing (multiple stages are easily stacked).
Stage base dimensions � 8.625 inches wide and 16.75 inches long.
Platform height (above base) � 2.845 inches
Platform dimensions � 5.70 inches wide and 16.75 inches long
Serial number � 89-295-20
Has externally user adjustable limit switch option
EG&G PM Field DC Servo Motor � MT2115-014DF
Stage is in near-flawless condition although it has not been tested with a driver. Manual control is possible using external control knob, and motion is very smooth throughout range.
Location H3 R2
Photo set 992
***MPN 8500-12
***OEM Kensington
***SKU*** DP545
-
$320.00
This is an Aerotech XY translation stage consisting of two Model ATS 302MMW stages stacked one on the other. The motors are both missing (they would have had spur gears mounted on them to transmit motion to the leadscrews.
Stage base dimensions � 5 inches square
Overall stage height � 3.075 inches
Stage clear aperture � 2 by 3.5 inches (partly occluded by cross-mounting of stages)
Leadscrew pitch � 0.5mm
Range of motion � 2 inches in X and Y
Motor mount size � NEMA 23
Stage is in excellent condition although the cable leads to the limit switches have been severed.
Location MB 141
Photo set 989
***MPN ATS302
***OEM Aerotech
***SKU*** DP542
-
$250.00
Aperture Turret in Centerable Mount..
This is a precision pinhole diaphragm turret complete with centerable mount and nine graded pinholes (lettered �A� through �H�) and one square aperture, lettered �J�. The size of the pinholes appears to range from approximately 1.75mm to 1.5mm. The square aperture is approximately 0.3mm on a side. All of these are very rough measurments.
Centration of the turret is accomplished via two Mitutoyo micrometer spindles reading to 0.01mm
Centration range is plus or minus 3mm
50mm diameter dovetail mounting flanges on both sides
Distance between outer flange faces is 32mm
Overall diameter of the black housing is 72mm
The apparatus is in very fine condition. The pinholes do not have any blemishes. The square aperture corners do appear to be slightly rounded. This is obviously a commercially made product but we were unable to discover who manufactured it.
Location MB 141.
Photo set 987.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical support & optical accessories.
We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price.
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific instruments & industrial
equipment
We ship with the utmost care!
***MPN
***OEM Custom
***SKU*** DP540
-
$150.00
This is a small stainless steel single-axis linear translation stage. It appears to be custom made, but the machining is superb, as is the condition. The upright is fixed to the base (it does not move with the platform) and it carries what appears to be a small coil with a BNC connector. The coil is offset by about 10mm to one side. The centerline of the coil bore is 2.25 inches above the translation platform. Bore diameter is approximately 37mm.
Basic dimensions include:
Base length � 6 inches
Base width � 4 inches
Base thickness � 1 inch
Upright height � 4.875 inches
Upright thickness � 1 inch
1-inch travel Starrett micrometer reading to 0.001 inches
Platform dimensions � 3 inches long by 3.375 inches wide.
The platform runs on two 0.500 inch rods using recirculating ball bearings. The platform is captive to the micrometer spindle using a strong magnet.
***MPN
***OEM
***SKU*** DP539
-
$1,900.00
This is certainly the finest stage ever made for the examination of 8-inch wafers under a microscope This Kensington stage is very massive (over 200 pounds) and formed the �base� of the Reichert Polyvar SC semiconductor research microscope. For that reason the base is quite long in the front-to-rear dimension � the upright frame of the Polyvar was secured to the rear center of the base.
The stage consists of four independent motions. The bottom �X� translator occupies much of the base plate with 8 inches of motion front-to-back. Sitting on top of that is a second 8-inch translator for the �Y� axis. On top of the Y translator is an 8-inch diameter rotary stage. This stage may be moved in the Z axis through several millimeters.
All motions can be actuated manually using provided knobs. The stage is intended to be driven by a Model 4000 multi-axis controller equipped with suitable driver boards. The standard user interface is a small keypad that displays coordinates of the stage and degrees of theta rotation. This listing is ONLY for the actual stage as illustrated. The controllers and the driver boards are available separately, as are some of the user interface keypads.
The specifications on the Kensington 4000 series stages are most impressive � 0.1 micron resolution, 0.2 micron repeatability, and 1 micron total measurement error over the entire range of travel. Readout is via glass scales (covers shown removed on the X axis so construction may be seen). Theta rotation can be read to 4 arc seconds, with similar specifications for repeatability and accuracy. The theta stage has a recess for use with wafer loading equipment. The stage surface is provided with vacuum connections. Vacuum line connections are located on back panel immediately above the electrical axis connectors.
The stages are in spectacular condition. You will need to add a Model 4000 five-axis control system plus one axis driver board for each axis (Z-axis is optional, as is the theta axis, but a theta axis board is strongly recommended) Other components needed are the connection cables, and the user interface keypad with display. All of these components are manufactured by Kensington.
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!.
***MPN XY-Theta
***OEM Kensington
***SKU*** DP503
-
$2,200.00
***MPN D-638
***OEM Davidson Optronics
***SKU*** DP499
-
$200.00
Mark-Tech Laser mounting for targets and beam-splitters. Magnetic actuator needs repair. Mount is 4.25 inches wide, 5.625 inches long. Optic axis height is nominally 2.5 inches. There are large diameter super-fine pitch adjustment screws for Y and Z translation (parallel to optic axis).
Bore diameter of holder is 1.25 inches. There is a large spring-loaded bearing that engages the detents in the mirror or detector cells. The base has a switchable permanent magnet for secure clamping. There are also three mounting holes (clearance for �-20 bolts) that are concentric with the leveling pads which are fixed in place.
Mounts are in very nice condition but there is some wear in finish of the base paint. Magnetic actuator needs repair. Part number on the mount is 6412 and it is dated April 1988.
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 6412
***OEM Mark-Tech Laser, Inc.
***SKU*** DP484
-
$70.00
US Laser Spatial Filter Carrier Unknown Housing.
This appears to be a standard US Laser spatial filter holder with thumb-screw adjustments. However, opposite the thread for fitting the aperture, there is an additional cubic housing with a 20.5mm bore. The bore is not perfectly concentric with the filter aperture in the �centered� position.The spatial filter holder is mounted on a US Laser optical bench carrier, 2.25 inches wide, fitting their standard optical rail.
There is no kinemetric adjustment to the aperture housing, so it is doubtful that it was to be used for holding one of the mirrors..
Carrier and holder are in excellent condition.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Optical Holders for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN
***OEM US Laser
***SKU*** DP476
-
$70.00
This item is a US Laser centerable holder for an interchangeable spatial filter diaphragm. The diaphragm may be centered in both the Y and the Z axis (orthogonal to the optic axis). Large diameter Allen head set screws with fine threads provide suitable sensitivity to adjustments. The holder will accept various screw-in diaphragms (please see our other listings for an assortment of available apertures). The mount is provided with a carrier bracket that fits the standard US Laser optical bench, as well as those manufactured by Control Laser and Lee Laser. On some units a part number appears on a label – # 1020-2..
Condition is excellent, with a bit of fading to the anodizing. No aperture is supplied � that will need to be ordered separately..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Optical Mounts and Fixtures for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 1020-2
***OEM US Laser
***SKU*** DP472
-
$70.00
This item is a US Laser centerable holder for an interchangeable spatial filter diaphragm. The diaphragm may be centered in both the Y and the Z axis (orthogonal to the optic axis). Large knurled thumb screws with fine threads provide suitable sensitivity to adjustments. The holder will accept various screw-in diaphragms (please see our other listings for an assortment of available apertures). The mount is provided with a carrier bracket that fits the standard US Laser optical bench, as well as those manufactured by Control Laser and Lee Laser.
Condition is superb. No aperture is supplied � that will need to be ordered separately..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Optical Mounts and Fixtures for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM US Laser
***SKU*** DP471
-
$100.00
This is a US Laser standard optical bench carrier with three integrated components installed. The �type� label on the bottom of the carrier simply states Safety Shutter and Front Mirror, (no catalog number). However, this appears to have an additional �First Pulse� shutter installed, which is missing the flag. The rotary solenoid is there along with the bracket.
The first component is a �Safety Shutter� assembly similar to the one labeled �type 1031-2� on a different carrier. However it has been fully integrated with a front mirror kinemetric mount.
The shutter appears to be �gravity fail-safe� type using rotary solenoids � if the solenoid loses power, the shutter flag automatically drops closed There is a warning light for safety shutter position indication. Shutter controller is not provided.
The kinemetric mount includes a standard US Laser R=90% at 1064nm mirror, part number USL 3403. Coating appears to be in perfect condition. Overall condition appears excellent..
***MPN
***OEM US Laser
***SKU*** DP470
-
$425.00
US Laser Polarizing Prism Attenuator
U. S. Laser Adjustable Attenuator, Model 1005-3-B-2 on carrier fitting US Laser optical benches. Carrier has sprocket-driven belt linkage to rotatable wave plate. Polarizing prism is adjustable through 360 degrees and can be locked via a clamping ring. Prism is about 12mm square in cross-section. Free opening of holder is 10mm diameter. The wave plate may be rotated independently of the prism. It has it�s own locking collar. Attenuation adjustment range has a ratio of approximately 100 to 1, with a less than 15% insertion loss.
Optics are in perfect condition as is the main rotating mount assembly. However the countershaft with the sprocket has been slightly bent and there are some teeth missing on the belt. The stainless steel lever for adjusting the initial orientation of the polarizing prism is missing. Axle and belt could be replaced very easily (axle is held in place with two �E� clips). Handle for polarizer simply threads in place and threads are not damaged. The drive mechanism has the advantage of allowing attenuation adjustment without having to open the laser enclosure. The external actuator knob and system connecting the carrier to the external actuator are not present.
1064nm AR Coating
Listing:
http://www.uslasercorp.com/catalog/attenuators.html#CableDriven
***MPN 1005-3-B-2
***OEM US Laser
***SKU*** DP461
-
$500.00
US Laser Polarizing Prism Attenuator with Rotating Waveplate for 1064 nm
U. S. Laser Adjustable Attenuator, Model 1005-3-B-2 on carrier fitting US Laser optical benches. Carrier has sprocket-driven belt linkage to rotatable wave plate. Polarizing calcite prism is adjustable through 360 degrees and can be locked via a clamping ring. Prism is about 12mm square in cross-section. Free opening of holder is 10mm diameter. The wave plate may be rotated independently of the prism. It has it�s own locking collar.
All parts of the assembly are in flawless condition including the optics. Attenuator allows adjustment of laser intensity over a range of approximately 100:1 with a less than 15% insertion loss. The drive mechanism has the advantage of allowing attenuation adjustment without having to open the laser enclosure. The external actuator knob and system connecting the carrier to the external actuator are not present..
1064nm AR Coated Optics
Listing:
http://www.uslasercorp.com/catalog/attenuators.html#CableDriven
***MPN 1005-3-B-2
***OEM US Laser
***SKU*** DP460
-
$40.00
This is a metal film graduated neutral density filter on a circular glass substrate 152mm in diameter. The central bore for the hub is 24mm in diameter. The effective filter area is 60mm wide (extending from 14mm to 74mm radius). The clear diameter of the hub is 26mm. Thickness of the glass is 3mm. The filter is deposited on the surface (no cover glass).
The filter is in fair condition � the metalized film coating appears quite �blotchy� and uneven. The substrate appears to be in excellent condition, however. There is no calibration information with the filter, nor do we know who the manufacturer is. The density appears to become quite great rather quickly. I am not sure what the density curve is supposed to be, or what angle of arc it subtends.
Please see the first photo for indication of coating problems � the line across the bottom of the filter is a reflection, but the mottled appearance is in fact the way it appears.
***MPN
***OEM Custom
***SKU*** DP450
-
$240.00 Original price was: $240.00.$200.00Current price is: $200.00.
This is an unknown model Klinger linear translation stage. It is similar in dimensions to the standard MR80.25 translation stage that runs on single-row opposed ball-bearing races. This stage, however, runs on recirculating double-row ball bearings, and as such, should have a much higher load-bearing capacity than the standard MR80 stage, as well as better straightness characteristics. I was unable to find any listing for this stage so it may have only been in production briefly.
Overall length of upper platform � 92mm
Overall width of upper platform � 80mm
Height of platform � 18.5mm
Fixed mounting plate 0.5mm proud of moving platform
Fixed platform area � 53mm long by 53.6mm wide
Aperture clearance � 35mm diameter
Spindle graduated in 10 micron intervals, 25mm range
Straightness �
The stage is in superb condition both mechanically and cosmetically…
.
***MPN
***OEM Klinger Scientific
***SKU*** DP418
-
$360.00
This is an Ealing Stage without any actuator assembly. It has a excursion range of 12mm. The translation platform (160mm square) has an inset 5-inch internal threaded mounting ring that is compatible with the components of the Ealing Research Optical Bench series. Ealing part number for the stage, including a micrometer spindle, is 22-2331. Please note that this stage does not include a micrometer..
Stage width and length � 160mm
Stage clear thru bore � 3.5 inches
Stage height � 35mm
Threaded ring � 5 inch 12TPI
Horizontal Load Bearing � 22 pounds
Vertical Load Bearing � 15 pounds.
Stage is in excellent condition � just a bit of bleaching in the anodizing on the actuator holder bracket. Motion is perfectly smooth without play.
BMI Surplus, Inc. has a large inventory of used, new and pre-owned Translation Stages for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 22-2331
***OEM Ealing / Beck
***SKU*** DP413