Showing 12261–12280 of 51877 results
-
Newport 10RP32 -532 Wave Plate
$500.00Unit is a Newport 10RP32-532 zero-order precision wave plate.
Specifications:
-Diameter 25.4mm
-Wavelength: 532nm
-Thickness: 6.35mm..Manufactures description:
The 10RP32-532 True Zero-Order Wave Plate consists of a birefringent polymer film cemented between two high-precision, high efficiency, broadband antireflection coated BK 7 windows. This construction ensures excellent transmitted 532 nm wavefront quality and /2 retardation, while minimizing beam deviation and surface reflection losses. The assembly is mounted in a 25.4 mm outer diameter black anodized aluminum housing for protection and ease of mounting and has a 17.8 mm clear aperture. The wave plate fast axis marked for alignment reference. Polymer wave plates offer benefits over quartz wave plates such as better angular acceptance and less sensitivity to wavelength change. Polymer wave plates have excellent angular field of view. Retardation changes by less than 1% over a �12� incidence angle. The polymer material has very low birefringence that is nearly constant with wavelength..
***MPN 10RP32 -532
***OEM Newport Research Corp (NRC)
***SKU*** 28354 -
High-Energy Pinhole Aperture 15 um
$70.00This item is a used Newport 900PH-15 Hi-energy Pinhole Aperture mounted for Model 900 Filter. The pinhole comes from a working environment but has not been tested.
From the manufacturer website: The 900PH-15 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 15 � 1.5 �m diameter hole with extremely low ellipticity is produced using laser drilling techniques. These pinholes have a laser damage threshold of 75 MW/cm2 CW and are suitable for pulsed laser use up to 700 mJ/cm2. This version is mounted for use with our Model 900 spatial filter.
Manufacturer Specifications:
– Diameter: 9.525 mm
– Diameter Tolerance: 0.125 mm
– Aperture Diameter: 15 +/-1.5 �m
– Thickness: 15.24 um
– Materia: Molybdenum
– Damage Threshold: 75 MW/cm2 CW, 700 mJ/cm2 with 10 nsec pulses.
***MPN 900PH-15
***OEM Newport Research Corp (NRC)
***SKU*** 30282 -
Steel Extended Contact Bearing Stage XYZ
$500.00This item is an OptoSigma Custom XYZ stage in excellent working condition. The stage is comprised of OptoSigma parts 122-0045 and 122-0047.
Manufacturers Specifications 122-0045:
– Dimensions a x b (mm): 25 x 25
– Axes of Travel: XY
– Travel (mm): �3
– Type: Metric
– Material: Steel
– Micrometer resolution: 10�
– Micrometer Sensitivity: 10�
– Straightness: 2�
– Height (mm): 20
– Load Capacity (kg): 2
– Micrometer Position: Side
– Dimensions tolerance: �0.2mm
– Pitch: <25arcsec
– Minimum increment: 3�
– Finish: Black Chrome
– Yaw: <15arcsecManufacturers Specifications 122-0047:
– Dimensions a x b (mm): 25 x 25
– Axes of Travel: Z
– Travel (mm): �3
– Type: Metric
– Material: Steel
– Micrometer resolution: 10�
– Micrometer Sensitivity: 10�
– Straightness: 5�
– Height (mm): 24
– Load Capacity (kg): 1
– Micrometer Position: Pivot
– Dimensions tolerance: �0.2mm
– Pitch: <25arcsec
– Minimum increment: 3�
– Finish: Black Chrome
– Yaw: <15arcsec
***MPN Custom
***OEM Opto Sigma
***SKU*** 29307 -
Newport 5123 Silver Mirror 2 inch
$269.00Item is a Newport Research Corp. (NRC) 2″ silver coated Pyrex mirror.
Specifications:
-2″ diameter, 0.49″ thickness
-0.45-12 um
-Pyrex
-Wavelength range 450 to 12000 nm
-Clear aperture >80% of diameterManufacture description:
The 5123 General Purpose Silver Coated Mirror can be used over a broad spectral range with better than 95% reflectivity from 450 nm to beyond 12 �m. It’s proprietary silver-based coating makes this 2.0 inch (50.8 mm) diameter mirror highly reflective from 0� to 45� and virtually insensitive to polarization. Protective dielectric coatings make it resistant to tarnish and oxidation. Plus it has minimal phase distortion, so it is useful for ultrafast-pulsed applications with Ti:Sapphire and other lasers.VIS-IR Bandpass Blocking Filter is an optional blocking filter to shape the spectral output of our 300 to 450 W UV Flood Sources (Simulators). 290 to 400 nm plus residual 650 to 800 nm typical spectral output when used with the 81017 atmospheric attenuation filter. Warning, the 87066 will break if used with lamp power greater than 450 W.
***MPN New Focus 5123 VIS – IR
***OEM Newport Research Corp (NRC)
***SKU*** 28340 -
Selection of Seven Borosilicate Crown Glass
$120.00This is a nice selection of seven crown glass singlets of various focal lengths in a special case. The lenses are uncoated and include the following Oriel part numbers:
4020 � 0.5 inch diameter, 13mm focal length
4022 � 0.5 inch diameter, 25mm focal length
4023 � 0.5 inch diameter, 38mm focal length
4024 � 0.5 inch diameter, 50mm focal length
4025 � 0.5 inch diameter, 75mm focal length
5-2425-150 � 1 inch diameter, 150mm focal length
Unknown part number � 1 inch diameter, 35mm focal lengthThe lenses are all unmounted. Each comes with a protective cloth holder.
Photo set 1791
***MPN 402x Series
***OEM Oriel Corp
***SKU*** 30001 -
25mm Diameter Plane Mirror, VIS Coating
$50.00This is a plane mirror of 25mm diameter and 6mm thickness. The back of the mirror carries a label with the part number BD 103 079 05 � VIS. The mirror appears to have an aluminum coating and is not transmissive. Condition is near-perfect.
Photo set 1786
***MPN BD 103 079 05
***OEM Balzers
***SKU*** 23196 -
Dichroic Mirror 2 Inch Diameter Frosted Back
$90.00This is a Dichroic Mirror 2 Inch Diameter with a Frosted Back.
This is a plane glass mirror with a dichroic coating. Specifications include:Diameter = 2.000 inches
Thickness = 0.501 inches
Polished on dichroic side, obverse is frostedAxially transmitted color is violet. Condition is excellent � no visible flaws.
Photo set 1785
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned,
recycled, refurbished & used Optical Mirrors for sale.Buy online or give us a call at 781-871-8868.We have experienced customer
service representatives standing by ready to help you!!**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you
if you prefer to use your own carrier..
We have over 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN
***OEM
***SKU*** 23195 -
Newport 900PH-1 1.0 Micron
$99.00Newport 900PH-1 1.0 Micron
It is easiest to quote the Newport website for specifications regarding this mounted pinhole:
�The 900PH-1 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 1 +/- 0.5 micron diameter hole with extremely low ellipticity is produced using laser drilling techniques. These pinholes have a laser damage threshold of 75 MW/cm2 CW and are suitable for pulsed laser use up to 700 mj/cm2.�
This pinhole comes mounted into a square steel housing with pin and is intended for use in the Newport Model 900 spatial filter.
The mount of the pinhole states 10 microns, but either the decimal is missing or a 1 micron pinhole has been substituted for the original foil. The pinhole is perfectly round but is only visible with a fairly high magnification microscope.
***MPN 900PH-1
***OEM Newport Research Corp (NRC)
***SKU*** 23191 -
Mounted 2X Anamorphic Prism Pair, 780 – 1550 nm
$175.00Mounted 2X Anamorphic Prism Pair, 780 – 1550 nm
This anamorphic prism pair in a cylindrical mount is used to magnify a laser beam diameter in only one axis by a factor of 2x. Although not marked on the barrel, this was determined to be the prism pair used for the wavelength range of 780 to 1550nm by measuring the beam offset of the mount which was 5.7mm. (The only other 2x prism pair offered by Melles Griot has a 5.lmm offset).
The polarization state of the laser beam is unaltered. The prisms are coated to minimize reflection losses. Beam deviation may be altered by up to one degree, typically less. The output side of the housing is counterbored to accommodate interchangeable diode laser objectives in mounted cells (not included).
Input beam diameter can be up to 8 x 4mm. Outer black-anodized aluminum housing diameter is 30.15mm. Length is 38.1mm. Wavefront error held to less than � wave at 830nm.
The prism system is in superb condition both optically and cosmetically. The set screw for retaining the optional objective is absent.
***MPN GPA-2X-8.0-830
***OEM Melles Griot
***SKU*** 23146 -
Mod. 3700.1 Linear Stage with Bautz Motor 36“ Range
$750.00This linear stage has a travel of 36 inches. The carriage is 158mm long and 88mm wide. The guide track profile is 58mm wide and 37mm thick. Running parallel with the guide track is a ball-screw actuated by a Bautz permanent magnet motor. End plates are approximately 7 inches wide and 3 inches tall. Overall length of the assembly including motor housing is 59.5 inches.
Information on the Type plate on the carriage includes ‘Deutsche Star Model 3700.1, Typ 0325.301.05’. There is also a date, 4 May 1992
Information on the motor includes ‘Bautz Antriebs und Steuerungstechnik Permanent Magnet Motor, Typ E 589 MGB 5000-1. The electrical cable from the motor has no connector but they are of substantial length. There is no encoder mechanism
The assembly is in excellent condition with a small trace of localized corrosion present. Motion is very smooth throughout range (lead screw turned manually).
***MPN 032.301.05
***OEM Deutsche Star
***SKU*** 23183 -
Main Control Panel Module
$600.00This is the main user interface for the Nikon Optistation 3 wafer inspection system. The module includes the control panel as well as all the associated circuit boards and cables. Please note that only the circuit boards and cables that are permanently attached to the board are included. One twisted pair cable has been cut (to the emergency cut-off switch).
The panel is in excellent condition although we are unable to test it for functionality.
Photo set 1716
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN OptiStaion III
***OEM Nikon
***SKU*** 23131 -
ISP GE-W-25-2 Ge IR Window
$50.00ISP Optics GE-W-25-2 Germanium Infrared Window
Diameter: 25mm
Thisckness: 2mm
Specifications:
– Dia tolerance: +0, -0.005″(+0, -0.13mm)
– Th tolerance: �0.005� (�0.13mm)
– Clear Aperture: 85%
– Parallelism: 3 arc min
– Flatness: 1/10 wave at 10.6 um
– Surface Finish: 40/20***MPN GE-W-25-2
***OEM ISP Optics
***SKU*** 28028 -
Universal Base Newport Research Corp (NRC) BUP-2
$30.00This is a Newport Research Corp (NRC) BUP-2 Universal Base, Freely Rotating Disk, Eccentric Clearence Slot.
***MPN BUP-2
***OEM Newport Research Corp (NRC)
***SKU*** 26541 -
2-inch Gimbal Mount less Lens Holder, less Bracket
$120.00This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. This mount lacks the optic carrier and the angle support plate.
This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The removable optic carrier is missing from this mount – currently there is a clear bore of 2.255 inches diameter. One could easily fabricate a mirror holder to fit the bore.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated. This version of the mount is cast of light aluminum alloy as opposed to steel. Please note that the elevation spring plunger missing in the photos has been replaced!
***MPN SG201
***OEM Burleigh
***SKU*** 23059 -
Burleigh 2-inch Gimbal Mount with Elevation
$275.00This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.
This mount includes a special Piezo actuator bearing pad for the elevation micrometer. The actuator does not include the connection cable or the control unit to ramp the Piezo. The special Piezo system allows extraordinary positional sensitivity.
Both axes have internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.
The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount, 2 inch optic cell with retainer, support bracket and Piezo units. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy.
***MPN SG201
***OEM Burleigh
***SKU*** 23056 -
Burleigh SG201 2in Gimbal Mount and Angle Bracket
$129.00Burleigh SG201 2″ Gimbal Mount and Angle Bracket
This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts lack the optic carrier portion.
This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The removable optic carrier is missing from this mount – currently there is a clear bore of 2.255 inches diameter. One could easily fabricate a mirror holder to fit the bore.
The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws. The rear portion of the angle plate has been milled away (see photo).
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimension is 4 inches by 2.70 inches (base used to be 4 inches long). The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount and modified support bracket. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy
***MPN SG201
***OEM Burleigh
***SKU*** 23054 -
2-inch Gimbal Mount , Lens Holder, and Angle
$215.00Burleigh 2-inch Gimbal Mount Lens Holder
This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.
This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror. Please note – the retaining ring set in the third photograph is an optional insert for 1.5 inch diameter optics – tt is not included. In its stead, the standard 2-inch retaining ring will be supplied.
The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!***MPN SG201
***OEM Burleigh
***SKU*** 23053 -
2 inch Gimbal Mount Lens Holder with Angle
$225.002 inch Gimbal Mount Lens Holder with Angle.
This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.
The micrometer spindles have large diameter plastic rings attached to the spindle drum to make it easier to accomplish very precise adjustments. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.
The last component is a right-angle support bracket for attaching the gimbal mount to a table. The gimbal carrying plate attaches to the bracket with four Allen cap screws.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is excellent. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy. The mounts have been completely gone over and micrometer spindles cleaned and relubricated.
Photo set 1631 .
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!
***MPN SG201
***OEM Burleigh
***SKU*** 23052 -
Lansing 4.8 inch Gimbal Mounting
$325.00This Lansing gimbal mounting is capable of holding optics or mirrors up to 5 inches in diameter. There are three recesses on the internal mounting ring for locating spacers suitable for the optic to be secured – the included spacers reduce the aperture to approximately 4 inches.
� Optic axis height – 4 inches
� Base width – 7.5 inches
� Base length – 6 inches
� Range of motion – at least plus or minus 3 degrees
� Graduated micrometer spindlesThe mount is in excellent condition and fully functional. Magnetic bearing pads keep the gimbal mounting rings in contact with the anvil of the setting micrometer spindle.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!***MPN
***OEM Lansing
***SKU*** 21556 -
Lansing 4.8 inch Gimbal Mounting with
$300.00This is a Lansing 10-503 Lansing 4.8 inch Gimbal Mounting with Micrometers
This Lansing gimbal mounting is capable of holding optics or mirrors up to 5 inches in diameter. There are three recesses on the internal mounting ring for locating spacers suitable for the optic to be secured – no spacers are included. This mount is also missing the block with the spring-loaded plunger that limits the altitude ring motion.
� Optic axis height – 4 inches
� Base width – 7.5 inches
� Base length – 6 inches
� Range of motion – at least plus or minus 3 degrees
� Graduated micrometer spindlesThe mount is in excellent condition and fully functional. Magnetic bearing pads keep the gimbal mounting rings in contact with the anvil of the setting micrometer spindle.
Photo set 1528.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!***MPN 10-503
***OEM Lansing
***SKU*** 21555
