-
-
$80.00
SMA adapter SM4736 from Fairview Microwave is part of a very large selection of in-stock interconnect RF components. Our SMA to TNC adapter is a coaxial adapter design with a 50 Ohm impedance. This 50 Ohm SMA adapter is manufactured to precise RF adapter specifications and has a maximum VSWR of 1.5:1.
-
$125.00
NovAtel OEM628 Series Receivers
-
$1,900.00 Original price was: $1,900.00.$1,400.00Current price is: $1,400.00.
Precision Calibrated, Output Isolator WR-10 Waveguide Noise Source Module
-
-
$100.00
Peregrine semiconductor
P#4312-EK #26
-
$700.00
HARRIS HA2-2600-8 OP-AMP
WIDEBAND, HIGH IMPEDANCE VIDEO AMPLIFIER
Lot of 73
-
$250.00
Wavelength Electronics MPT-2500
- Temperature Controller
- Temp. Range: -99 – 150?
- Temp Stability: <0.005?
- TEC Output:
- Bipolar Output Current: ±2.5A
- Maximum Output Power: 60W
- Current Limit Range: 0 – 2500mA
- Connector: 15-Pin D-Sub
- Dimensions: 3.55 x 3.5 x 1″
-
-
$70.00
Analog Devices ADM717 EVAL BD
Analog Devices Inc. ADM7172CP-EVALZ Evaluation Board helps designers evaluate the functionality of the ADM7172 linear regulators. ADM7172CP-EVALZ can provide simple device measurements, such as line and load regulation, dropout, and ground current with just a single voltage source, a voltmeter, an ammeter, and load resistors.
- 2.3V to 6.5V Input voltage range
- 0mA to 2A Output current range
- −0.5%/+1% Output voltage accuracy
- -40°C to +125°C Operating temperature range
- Output voltage can also be adjusted up with two external resistors from any fixed output voltage option
- VOUT = VOUT(FIXED) × (1 + R1/R2)
-
$200.00
LNA 605 10-600 MHz Low Noise Amplifier
RF BAY, Inc.
www.rfbayinc.com LNA-605
LNA Series 10 – 600MHz Low Noise Amplifier
Rev. A 1
Features
• Frequency Range: 10 – 600MHz
• Gain: 40dB
• P1dB : +17dBm
• IP3: +31dBm
• Noise Figure: 1dB
• DC Power: 5V/135mA
• SMA Connector
Performance measured @ 300MHz
Description
LNA-605 is a 1dB Noise Figure Low
Noise Amplifier operates with frequency
range from 10MHz to 600MHz. Useable
to 700MHz
-
$165.00
RF BAY, Inc.
www.rfbayinc.com LNA-850
LNA Series 750 – 950MHz Low Noise Amplifier
Rev. A 1
Features
• Frequency Range: 750 – 950MHz
• Gain: 17dB
• P1dB: +16.5dBm
• IP3: +30dBm
• Noise Figure: 1.2dB
• DC Power: 5V/60mA
• SMA Connector
-
$170.00
ADL 5801 EVAL BD Z
The ADL5801 uses a high linearity, doubly balanced, active
mixer core with integrated LO buffer amplifier to provide high
dynamic range frequency conversion from 10 MHz to 6 GHz.
The mixer benefits from a proprietary linearization architecture
that provides enhanced input IP3 performance when subject to
high input levels. A bias adjust feature allows the input linearity,
SSB noise figure, and dc current to be optimized using a single
control pin.
he high input linearity allows the device
to be used in demanding cellular applications where in-band
blocking signals may otherwise result in degradation in dynamic
performance. The adaptive bias feature allows the part to provide
high input IP3 performance when presented with large
blocking signals. When blockers are removed, the ADL5801
can automatically bias down to provide low noise figure and
low power consumption.
The ADL5801 is fabricated using a SiGe high performance IC
process. The device is available in a compact 4 mm × 4 mm,
24-lead LFCSP package and operates over a −40°C to +85°C
temperature range. An evaluation board is also available
-
$175.00
ADL 5801-evalz is an RF evaluation board
Mixer 10MHz – 6GHZ evaluation board
The ADL5801 uses a high linearity, doubly balanced, active
mixer core with integrated LO buffer amplifier to provide high
dynamic range frequency conversion from 10 MHz to 6 GHz.
The mixer benefits from a proprietary linearization architecture
that provides enhanced input IP3 performance when subject to
high input levels. A bias adjust feature allows the input linearity,
SSB noise figure, and dc current to be optimized using a single
control pin.
The high input linearity allows the device
to be used in demanding cellular applications where in-band
blocking signals may otherwise result in degradation in dynamic
performance. The adaptive bias feature allows the part to provide
high input IP3 performance when presented with large
blocking signals. When blockers are removed, the ADL5801
can automatically bias down to provide low noise figure and
low power consumption.
The ADL5801 is fabricated using a SiGe high performance IC
process. The device is available in a compact 4 mm × 4 mm,
24-lead LFCSP package and operates over a −40°C to +85°C
temperature range. An evaluation board is also available.
-
$90.00
Hittite 106965-3 Board THRU CAL RF Board
-
$120.00
The ADL5521 is a high performance GaAs pHEMT low noise
amplifier. It provides high gain and low noise figure for single-
downconversion IF sampling receiver architectures as well as
direct-downconversion receivers.
The ADL5521 provides a high level of integration by incorporating
the active bias and dc blocking capacitors, making it very easy
to use while not sacrificing design flexibility.
The ADL5521 is easy to tune, requiring only a few external
components. The device can support operation from 3 V to 5 V,
and the current draw can be adjusted with the external bias
resistor for applications requiring low power consumption.
The ADL5521 comes in a compact, thermally enhanced, 3 mm ×
3 mm LFCSP and operates over the temperature range of
−40°C to +85C.
-
$125.00
Mini Circuit LNA-900
RF BAy Inc.
Female
with Ground and +5V
-
$30.00
PI C-170.10 Cable
LOT OF 3
LOT OF 3
-
$150.00
Mini-circuit RF Bay Inc.
FAS-256
Female
with caps , ground, and 12v
-
$200.00
General Parameters
-
Type
Double Balanced Mixer
-
LO Frequency
10 MHz to 1.2 GHz
-
IF Frequency
DC to 1.2 GHz
-
Conversion Loss
8 to 9 dB
-
LO Drive – Power
13 dBm
-
P1dB
9 dBm
-
IP3
22 dBm
-
LO/RF Isolation
26 to 62 dB
-
LO/IF Isolation
20 to 68 dB
-
VSWR IF
1.50:1, 2.00:1
-
VSWR RF
1.50:1, 2.00:1
-
Impedance
50 Ohms
-
Package Type
Module with Connectors
-
Dimension
1.25 x 1.25 x 0.63 Inch
-
Connector
SMA
-
Operating Temperature
-40 to 85 Degree C
-
Storage Temperature
-55 to 100 Degree C
- SMA RF 10Mhz to 1.2 GHz Passive Double Balanced Mixer