Anamorphic Laser Beam Prism Pair 2.2x at 820nm
This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.
One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.
� Anamorphic magnification – 2.2x
� Beam offset – ~5mm
� Antireflection coating 820 nm
� Part number – 18-2009
� Thread inside diameter – 1.08 inches
� Base dimensions – 2.25 inches wide, 2.11 inches long
� Centerline height, including base – approximately 1 inch
These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.
***MPN 18-2009
***OEM Special Optics
***SKU*** 21474
Anamorphic Laser Beam Prism Pair, ~3.5x
This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.
One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.
� Anamorphic magnification – ~3.5x
� Beam offset – ~5mm
� Antireflection coating at 820nm
� Part number – Unknown (probably 18-20??)
� Thread inside diameter – 1.08 inches
� Base dimensions – 2.25 inches wide, 2.10 inches long
� Centerline height, including base – approximately 1 inch
Beam profiler/reprofiler
These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.
***MPN 18-20xx-series
***OEM Special Optics
***SKU*** 21473
Anamorphic Laser Beam Prism Pair, 2.4x
Anamorphic Laser Beam Prism Pair
� Anamorphic magnification – 2.4x
� Beam offset – ~5mm
� Antireflection coating at 820nm
� Part number – 18-2008
� Thread inside diameter – (end plates missing)
� Base dimensions – 2.25 inches wide, 1.98 inches long
� Centerline height, including base – approximately 1 inch
This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.
One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.
Beam profiler/reprofiler
These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.
***MPN 18-2008
***OEM Special Optics
***SKU*** 21472
Anamorphic Laser Beam Prism Pair 2.2x Mounted
Special Optics 18-2009 Anamorphic Laser Beam Prism Pair, 2.2x, Mounted.
used excellent condition.
This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.
One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.
� Anamorphic magnification – 2.2x
� Beam offset – ~5mm
� Antireflection coating 860nm
� Part number – 18-2009
� Thread inside diameter – 1.08 inches
� Base dimensions – 2.25 inches wide, 2.11 inches long
� Centerline height, including base – approximately 1 inch
These prisms housings do show very light signs of previous use, but the glass appears to be without flaws. Please note that photo of 820nm coating prism system was recorded twice – we have several of both types.
BMI Surplus, Inc. has a huge inventory of new, used, pre-owned &
recycled Lasers and Laser Accessories For Sale!
Buy online or give us a call at 781-871-8868. We have experienced
customer service representatives standing by ready to help you!
**Handlng & Freight fees depend on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific
instruments & industrial equipment. Be assured we ship with the utmost care!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 18-2009
***OEM Special Optics
***SKU*** 21448
Anamorphic Laser Beam Prism Pair 2.4x Mounted
Special Optics 18-2008 Anamorphic Laser Beam Prism Pair, 2.4x, Mounted
This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.
One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.
� Anamorphic magnification – 2.4x
� Beam offset – ~5mm
� Antireflection coating ( at 820nm ?)
� Part number – 18-2008
� Thread inside diameter – 1.08 inches
� Base dimensions – 2.25 inches wide, 2.11 inches long
� Centerline height, including base – approximately 1 inch
These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.
***MPN 18-2008
***OEM Special Optics
***SKU*** 21447
ILX Lightwave LDX-3525 Precision Current Source
ILX Lightwave LDX-3525 Precision Current Source.
Unit powers on.
No other testing performed.
Cosmetic Condition- Excellent. Last calibration tamper seals still affixed.
Precision Current Source; 200/500 mA Range
The LDX-3500 Series Laser Diode Current Sources is a low-cost microprocessor-based precision instrument specifically designed to control low to high power laser diodes. It provides a low noise, high-stability current output for precise control of laser diodes, so measurements in development or production can be made with confidence. The LDX-3500 Series has dual current ranges of 200/500 mA. In addition to precision current control, it is loaded with standard features including PD current measurement for constant power control, analog modulation for power and wavelength tuning, and an analog output for remote monitoring.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Lasers and Laser Accessories for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested, as is items is discounted at time of listing.
**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN LDX-3525
***OEM ILX Lightwave
***SKU*** 57118
Transient Suppressor 1500V JanTXIN6164 Lot of 10
This is a lot 10 Diodes JanTXIN6164.
BMI Surplus, Inc. has a huge inventory of new, pre-owned & recycled Electronic Parts For Sale!
Buy online or give us a call at 781-871-8868.
We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment.
Be assured we ship with the utmost care!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN JanTXIN6164
***OEM Custom
***SKU*** 60672
Thorlabs LM9F 1/2 inch Post-Mountable Laser Diode Mount
The is an Thorlabs LM9F 1/2 inch Post-Mountable Laser Diode Mount .
For ?5.6 mm and ?9 mm Laser Diodes..
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned, recycled and refurbished Lens, Optics and Optical Holders for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN LM9F
***OEM Thorlabs
***SKU*** 58580
Newport F-L10 Laser Diode Objective Lens
Newport F-L10 Laser Diode Objective Lens
– RMS thread
– For collimating and focusing laser diodes and for fiber coupling
– Specs unknown
***MPN F-L10
***OEM Newport Research Corp (NRC)
***SKU*** 52678
Central Semiconductor CMPZ5239B Zenor
This is a Central Semiconductor CMPZ5239B Zenor Diodes (Roll of 3000).
***MPN CMPZ5239B
***OEM Central Semiconductor
***SKU*** 34576
