Showing 1381–1400 of 8540 results
-
Universal Base Newport Research Corp (NRC) BUP-2
$30.00This is a Newport Research Corp (NRC) BUP-2 Universal Base, Freely Rotating Disk, Eccentric Clearence Slot.
***MPN BUP-2
***OEM Newport Research Corp (NRC)
***SKU*** 26541 -
2-inch Gimbal Mount less Lens Holder, less Bracket
$120.00This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. This mount lacks the optic carrier and the angle support plate.
This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The removable optic carrier is missing from this mount – currently there is a clear bore of 2.255 inches diameter. One could easily fabricate a mirror holder to fit the bore.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated. This version of the mount is cast of light aluminum alloy as opposed to steel. Please note that the elevation spring plunger missing in the photos has been replaced!
***MPN SG201
***OEM Burleigh
***SKU*** 23059 -
Burleigh 2-inch Gimbal Mount with Elevation
$275.00This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.
This mount includes a special Piezo actuator bearing pad for the elevation micrometer. The actuator does not include the connection cable or the control unit to ramp the Piezo. The special Piezo system allows extraordinary positional sensitivity.
Both axes have internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.
The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount, 2 inch optic cell with retainer, support bracket and Piezo units. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy.
***MPN SG201
***OEM Burleigh
***SKU*** 23056 -
Burleigh SG201 2in Gimbal Mount and Angle Bracket
$129.00Burleigh SG201 2″ Gimbal Mount and Angle Bracket
This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts lack the optic carrier portion.
This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The removable optic carrier is missing from this mount – currently there is a clear bore of 2.255 inches diameter. One could easily fabricate a mirror holder to fit the bore.
The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws. The rear portion of the angle plate has been milled away (see photo).
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimension is 4 inches by 2.70 inches (base used to be 4 inches long). The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount and modified support bracket. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy
***MPN SG201
***OEM Burleigh
***SKU*** 23054 -
2-inch Gimbal Mount , Lens Holder, and Angle
$215.00Burleigh 2-inch Gimbal Mount Lens Holder
This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.
This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror. Please note – the retaining ring set in the third photograph is an optional insert for 1.5 inch diameter optics – tt is not included. In its stead, the standard 2-inch retaining ring will be supplied.
The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!***MPN SG201
***OEM Burleigh
***SKU*** 23053 -
2 inch Gimbal Mount Lens Holder with Angle
$225.002 inch Gimbal Mount Lens Holder with Angle.
This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.
The micrometer spindles have large diameter plastic rings attached to the spindle drum to make it easier to accomplish very precise adjustments. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.
The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.
The last component is a right-angle support bracket for attaching the gimbal mount to a table. The gimbal carrying plate attaches to the bracket with four Allen cap screws.
Dimensions:
� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.
Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is excellent. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy. The mounts have been completely gone over and micrometer spindles cleaned and relubricated.
Photo set 1631 .
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!
***MPN SG201
***OEM Burleigh
***SKU*** 23052 -
Lansing 4.8 inch Gimbal Mounting
$325.00This Lansing gimbal mounting is capable of holding optics or mirrors up to 5 inches in diameter. There are three recesses on the internal mounting ring for locating spacers suitable for the optic to be secured – the included spacers reduce the aperture to approximately 4 inches.
� Optic axis height – 4 inches
� Base width – 7.5 inches
� Base length – 6 inches
� Range of motion – at least plus or minus 3 degrees
� Graduated micrometer spindlesThe mount is in excellent condition and fully functional. Magnetic bearing pads keep the gimbal mounting rings in contact with the anvil of the setting micrometer spindle.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!***MPN
***OEM Lansing
***SKU*** 21556 -
Lansing 4.8 inch Gimbal Mounting with
$300.00This is a Lansing 10-503 Lansing 4.8 inch Gimbal Mounting with Micrometers
This Lansing gimbal mounting is capable of holding optics or mirrors up to 5 inches in diameter. There are three recesses on the internal mounting ring for locating spacers suitable for the optic to be secured – no spacers are included. This mount is also missing the block with the spring-loaded plunger that limits the altitude ring motion.
� Optic axis height – 4 inches
� Base width – 7.5 inches
� Base length – 6 inches
� Range of motion – at least plus or minus 3 degrees
� Graduated micrometer spindlesThe mount is in excellent condition and fully functional. Magnetic bearing pads keep the gimbal mounting rings in contact with the anvil of the setting micrometer spindle.
Photo set 1528.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!***MPN 10-503
***OEM Lansing
***SKU*** 21555 -
Cylindrical Lens, +100mm f.l., Unmounted
$50.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 100mm
� Length – 40mm
� Width – 25mm
� Manufacturer – Unknown
� Part number – Unknown
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
Photo set 1474
***MPN
***OEM Custom
***SKU*** 21503 -
Cylindrical Lens, +100mm f.l., Unmounted
$55.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 100mm
� Length – 60mm
� Width – 50mm
� Manufacturer – Melles Griot
� Part number – 01-LCP-011
� Glass type – BK7
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
Photo set 1473
***MPN 01-LCP-011
***OEM Melles Griot
***SKU*** 21502 -
Cylindrical Lens, +100mm f.l., Mounted
$55.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 100mm
� Length – 32mm (cut down?)
� Width – 50mm
� Manufacturer – Unknown
� Part number – 8100-32
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
This lens includes a lens mount that is 2 inches wide and 15/16 inches tall. The support shelf sits 1/2 inch above the base. The width of the aperture formed by the support arms is 1 3/8 inches. The bottom portion of the lens has been masked by black tape, easily removed if desired.
Photo set 1471
***MPN 8100-32
***OEM Custom
***SKU*** 21500 -
Cylindrical Lens, +150mm f.l., Mounted, Low
$70.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 150mm
� Length – 60mm
� Width – 50mm
� Manufacturer – Melles Griot
� Part number – 01-LCP-013
� Glass type – BK7
� Low precision figure
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
This lens includes a lens mount that is 75mm square and 13mm deep. The support shelf sits 13mm above the base. The aperture dimensions are 60mm wide by 54mm tall. The recess for the lens is 60mm wide and 62mm tall. Four nylon tipped set screws serve to hold the lens in the mount.
Photo set 1470
***MPN 01-LCP-013
***OEM Melles Griot
***SKU*** 21499 -
Cylindrical Lens, Negative 80mm f.l., Unmounted
$55.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Negative 80mm
� Length – 60mm
� Width – 30mm
� Manufacturer – Unknown
� Part number – Unknown
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
Photo set 1469
***MPN
***OEM Custom
***SKU*** 21498 -
Cylindrical Lens, +10mm f.l., Unmounted
$45.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 10mm
� Length – 25mm (blackened edges)
� Width – 12mm
� Manufacturer – Unknown
� Part number – Unknown
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
Photo set 1467
***MPN
***OEM Custom
***SKU*** 21496 -
Cylindrical Lens, +40mm f.l., Unmounted
$40.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 40mm
� Length – 60mm
� Width – 15mm
� Manufacturer – Unknown
� Part number – Unknown
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
Photo set 1465
***MPN
***OEM Custom
***SKU*** 21494 -
Cylindrical Lens, +40mm f.l., Mounted
$42.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 40mm
� Length – 40mm
� Width – 15mm
� Manufacturer – Unknown
� Part number – P-840
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
This lens has been mounted in a small square holder, 1.25 inches on a side and .375 inches thick. The off-center aperture is 16 by 24mm. These lenses have not be cut down so they do protrude from the edge of the cell by approximately 8 or 9mm.
Photo set 1464
***MPN P-840
***OEM Custom
***SKU*** 21493 -
Cylindrical Lens, +40mm f.l., Mounted, cut down lens
$40.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 40mm
� Length – 30mm (cut down)
� Width – 15mm
� Manufacturer – Unknown
� Part number – P-840
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
This lens has been mounted in a small square holder, 1.25 inches on a side and .375 inches thick. The off-center aperture is 16 by 24mm.
Photo set 1463
***MPN P-840
***OEM Custom
***SKU*** 21492 -
Cylindrical Lens, +40mm f.l., Mounted
$60.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 40mm
� Length – 20mm
� Width – 15mm
� Manufacturer – Unknown
� Part number – Unknown
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
This lens has been mounted in a circular cell, 52mm in diameter. This cell is in turn mounted in an outer ring of 65mm diameter. The clear central aperture of the inner lens support is 18mm.
Photo set 1462
***MPN
***OEM Custom
***SKU*** 21491 -
Cylindrical Lens, +40mm f.l., Mounted
$55.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 40mm
� Length – 40mm (cut down)
� Width – 25mm
� Manufacturer – Unknown
� Part number – Unknown
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
This lens is mounted in a nested ring mount. The inner ring is 54mm in diameter with a 40mm central aperture. There is a cover plate to bridge the milled gap for the lens. This cell in turn fits into another ring 60mm in diameter.
Photo set 1461
***MPN
***OEM Custom
***SKU*** 21490 -
Cylindrical Lens, +40mm f.l., Mounted
$60.00This is a plano-cylindrical lens. These lenses have a defined magnification in one direction, and perpendicular to that direction they are effectively ‘unpowered’. Cylindrical lenses find numerous applications in holography, as well as imaging elongated slits in spectrometers and monochromators.
Characteristics of this lens include:
� Focal length – Positive 40mm
� Length – 60mm
� Width – 20mm
� Manufacturer – Unknown
� Part number – Unknown
� Glass type – BK7 ?
� Uncoated
� Condition – no visible defectsPlease note – unless we are able to determine that a lens is a higher precision type (either by part number or by nomenclature on the lens itself) then it should be assumed that the lens has a low precision figure. When we have determined that a lens is definitely a low precision grade, then that will be stated in the lens characteristics.
This lens includes a lens mount that is 75mm square and 13mm deep. The support shelf sits 13mm above the base. The aperture dimensions are 60mm wide by 54mm tall. The recess for the lens is 60mm wide and 62mm tall. Four nylon tipped set screws serve to hold the lens in the mount.
Photo set 1460
***MPN
***OEM Custom
***SKU*** 21489
