Showing 1361–1380 of 8540 results
-
Newport HVM-.5 Vertical Drive Kinematic Optical
$85.00This item is a used Newport HVM-.5 Vertical Drive Kinematic Optical Mount in excellent working condition.
From manufacturer website: The HVM-.5 Vertical Drive Kinematic Optical Mount is unlike any optical mount in its class. The HVM�s unique ball-and-wedge drive mechanism enhances the overall performance of the 1/2 inch (12.7mm) diameter optical mount by reducing stiction and backlash to negligible levels while maintaining a compact and robust package. This unique drive mechanism also allows substantial angular tilt without adjustment screws protruding from the back of the mount, where fingers can block the beam. At a scant 0.68 inch thickness the HVM can be placed in optical systems requiring minimum footprint. Newport�s in-line spring mechanism provides targeted tension at appropriate points to ensure the HVM is stable both short-term and long-term. The high resolution adjustment screws have a locking mechanism to prevent inadvertent adjustment. This same mechanism provides the ability to customize the feel/tension of each adjustment.
– Optic Diameter: 0.5 in. ( 12.7 mm )
– Drive Type: Allen-Key
– Angular Range: 2.5 degree
– Sensitivity: 5.8 arc sec
– Aluminum
***MPN HVM-.5
***OEM Newport Research Corp (NRC)
***SKU*** 32484 -
American Holgraphic SP00298-01 Hyperspectral Imaging
$575.00American Holgraphic SP00298-01 Hyperspectral Imaging.
When we got this instrument it was covered in reflective tape � obviously prepped for some spacecraft or high-altitude mission. There are no adjustments to the monochromator, so there must have been a camera system that acquired the spectrum. The slit is fixed in one position and not adjustable in width. It appears to be about 0.1mm wide (rough estimate). The system appears to be in near-perfect condition, however, there are a couple of rub marks on one of the collimation mirrors near the margin.
There is a circular mounting plate that I assume held the acquisition system. There are a few degrees of freedom in the alignment of the plate. The slit is in the base of the monochromator (as seen in the first photo) whereupon the light is directed to a mirror that sends it to the first collimation mirror. The grating element itself is just beneath the large aperture facing forward in the second photo. The grating substrate is convex and fixed in place. It appears to be about 25 to 30mm in diameter (I did not open up the instrument), and the two collimation mirrors appear to be about 75mm in diameter � again, just an estimate. The second collimation mirror directs the spectrum to the camera port.
There is a sticker on the instrument that identifies the manufacturer as �American Holographic�. The same sticker identifies the item as a catalog SP00298-01, serial number M2-016.
Photo set 865..
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Monochromators and Spectrometers for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN SP00298-01
***OEM American Holographic
***SKU*** 32432 -
Newport BUP-2 Universal Base
$30.00This used Newport BUP-2 Universal Base is in good working condition. This unit is missing one (1) of the ball bearings.
From manufacturer website: Newport�s BUP-2 Universal Base incorporates a patented mounting device that gives unprecedented positioning flexibility. A freely rotating disk, inset into each base, has an eccentric clearance slot to accommodate a 1/4-20 or M6 tie-down bolt. This single bolt firmly clamps the assembly to your table surface. The slot permits 0.707 in. of translation � at least half the diagonal distance between holes in Newport�s English and metric tables, breadboards and mounting components like lab jacks and stages. Thus it is always possible to find a mounting hole through the clearance slot by rotating the trapped disc; the bases can be freely positioned anywhere, at any orientation, on your table surface
.
***MPN BUP-2
***OEM Newport Research Corp (NRC)
***SKU*** 32416 -
Broadband Metallic Mirror, Pyrex, 50.8 mm Diameter
$110.00This item is a new Newport 20D20ER.2 Broadband Metallic Mirror.
From Manufacturer Website: The 20D20ER.2 Broadband Metallic Mirror is an excellent general purpose, broadband reflector. This 2 inch (50.8 mm) diameter mirror is made from a 12.7 mm thick Pyrex substrate. Pyrex has low thermal expansion and is an excellent substrate for most applications. The ER.2 protected silver coating is composed of a low emissivity silver film fully encapsulated by a multilayer dielectric stack to prevent oxidation. This coating has excellent broadband reflectivity in the IR, while maintaining very good performance in the visible and near IR. Average reflectivity is greater than 96% from 480�1100 nm and greater than 98.5% from 1.1�20 um. This mirror has a 1/10 wave surface flatness and a 15-5 surface quality.
***MPN 20D20ER.2
***OEM Newport Research Corp (NRC)
***SKU*** 31733 -
Camera Attachment with Micrometer Displacement
$300.00This is an unusual accessory for the McPherson Model 218 UV � Vacuum Scanning Monochromator.
It is a camera attachment for use with pieces of specially cut film. The film may be translated vertically (parallel to the slit) via a micrometer spindle.
The film is exposed via a simple sliding shutter arrangement.In order to install the attachment, it is necessary to remove the knife-edge slit system from the exit port of the monochromator. This modification is something that may not be easily reversed.
The camera attachment is in excellent and fully functional condition, although very obsolete.
Photo set 1917.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Monochromators and Spectrometers for sale.
We will work with you individually to find the perfect set up for your application..Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 218S
***OEM McPherson
***SKU*** 30122 -
Broadband Dielectric Eliptical Mirror, 33.02 mm
$110.00This item is a new up-opened Newport 13E20BD.1 Broadband Dielectric Eliptical Mirror.
From Manufacturer Website: The 13E20BD.1 Broadband Dielectric Elliptical Mirror is an extremely versatile mirror for laboratory applications and highly efficient over a broad wavelength range. This 1.30 inch (33.02 mm) minor axis, 1.838 inch (46.70 mm) major axis, eliptical mirror is made from a 9.37 mm thick Pyrex substrate. Pyrex has low thermal expansion and is an excellent substrate for most applications. The BD.1 coating reflects all visible laser lines in the range 488�694 nm with greater than 99% efficiency for any polarization at 0�45 degree angle of incidence. And high reflectivity is extended to greater than 98% at 441.6 nm. The BD-1 coating is extremely durable and will withstand repeated cleaning. This mirror has a wave/10 surface flatness and a 15-5 surface quality.
***MPN 13E20BD.1
***OEM Newport Research Corp (NRC)
***SKU*** 31670 -
Camera Port Adapter for TMD Microscope (no
$100.00This device permits using the bright-field vertical illuminator port on the Unitron TMD toolmaker’s microscope for both illumination and photography. It consists of a fixed beam-splitter housing along with a side-mounted collector lens for an external lamphouse (not included). On top of the beam-splitter housing is an adapter tube that accepts a photographic camera adapter (not included).
The overall height of the device (not including the mounting sleeve for the microscope) is 113mm. This distance can be altered through a small range with the helical thread of the upper sleeve and clamping collar. Diameter of the sleeve for the microscope port is 28.95mm. The inside diameter of the photo port 33mm. The flange for attachment of the lamphousing is 24mm in diameter.
The adapters are in very fine condition � optically perfect but with a few purely cosmetic blemishes in the finishes.
Photo set 1846
***MPN
***OEM Unitron
***SKU*** 30053 -
High-Energy Pinhole Aperture
$80.00This Newport 900PH-10 High Energy Pinhole Aperture comes from a working environment but has not been tested.
From manufacturer website: The 900PH-10 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 10 � 1 �m diameter hole with extremely low ellipticity is produced using laser drilling techniques. These pinholes have a laser damage threshold of 75 MW/cm2 CW and are suitable for pulsed laser use up to 700 mJ/cm2. This version is mounted for use with our Model 900 spatial filter.
– Aperture Diameter: 10 +/- 1 um.
***MPN 900PH-10
***OEM Newport Research Corp (NRC)
***SKU*** 30310 -
Newport 10RP32 -532 Wave Plate
$500.00Unit is a Newport 10RP32-532 zero-order precision wave plate.
Specifications:
-Diameter 25.4mm
-Wavelength: 532nm
-Thickness: 6.35mm..Manufactures description:
The 10RP32-532 True Zero-Order Wave Plate consists of a birefringent polymer film cemented between two high-precision, high efficiency, broadband antireflection coated BK 7 windows. This construction ensures excellent transmitted 532 nm wavefront quality and /2 retardation, while minimizing beam deviation and surface reflection losses. The assembly is mounted in a 25.4 mm outer diameter black anodized aluminum housing for protection and ease of mounting and has a 17.8 mm clear aperture. The wave plate fast axis marked for alignment reference. Polymer wave plates offer benefits over quartz wave plates such as better angular acceptance and less sensitivity to wavelength change. Polymer wave plates have excellent angular field of view. Retardation changes by less than 1% over a �12� incidence angle. The polymer material has very low birefringence that is nearly constant with wavelength..
***MPN 10RP32 -532
***OEM Newport Research Corp (NRC)
***SKU*** 28354 -
High-Energy Pinhole Aperture 15 um
$70.00This item is a used Newport 900PH-15 Hi-energy Pinhole Aperture mounted for Model 900 Filter. The pinhole comes from a working environment but has not been tested.
From the manufacturer website: The 900PH-15 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 15 � 1.5 �m diameter hole with extremely low ellipticity is produced using laser drilling techniques. These pinholes have a laser damage threshold of 75 MW/cm2 CW and are suitable for pulsed laser use up to 700 mJ/cm2. This version is mounted for use with our Model 900 spatial filter.
Manufacturer Specifications:
– Diameter: 9.525 mm
– Diameter Tolerance: 0.125 mm
– Aperture Diameter: 15 +/-1.5 �m
– Thickness: 15.24 um
– Materia: Molybdenum
– Damage Threshold: 75 MW/cm2 CW, 700 mJ/cm2 with 10 nsec pulses.
***MPN 900PH-15
***OEM Newport Research Corp (NRC)
***SKU*** 30282 -
Steel Extended Contact Bearing Stage XYZ
$500.00This item is an OptoSigma Custom XYZ stage in excellent working condition. The stage is comprised of OptoSigma parts 122-0045 and 122-0047.
Manufacturers Specifications 122-0045:
– Dimensions a x b (mm): 25 x 25
– Axes of Travel: XY
– Travel (mm): �3
– Type: Metric
– Material: Steel
– Micrometer resolution: 10�
– Micrometer Sensitivity: 10�
– Straightness: 2�
– Height (mm): 20
– Load Capacity (kg): 2
– Micrometer Position: Side
– Dimensions tolerance: �0.2mm
– Pitch: <25arcsec
– Minimum increment: 3�
– Finish: Black Chrome
– Yaw: <15arcsecManufacturers Specifications 122-0047:
– Dimensions a x b (mm): 25 x 25
– Axes of Travel: Z
– Travel (mm): �3
– Type: Metric
– Material: Steel
– Micrometer resolution: 10�
– Micrometer Sensitivity: 10�
– Straightness: 5�
– Height (mm): 24
– Load Capacity (kg): 1
– Micrometer Position: Pivot
– Dimensions tolerance: �0.2mm
– Pitch: <25arcsec
– Minimum increment: 3�
– Finish: Black Chrome
– Yaw: <15arcsec
***MPN Custom
***OEM Opto Sigma
***SKU*** 29307 -
Newport 5123 Silver Mirror 2 inch
$269.00Item is a Newport Research Corp. (NRC) 2″ silver coated Pyrex mirror.
Specifications:
-2″ diameter, 0.49″ thickness
-0.45-12 um
-Pyrex
-Wavelength range 450 to 12000 nm
-Clear aperture >80% of diameterManufacture description:
The 5123 General Purpose Silver Coated Mirror can be used over a broad spectral range with better than 95% reflectivity from 450 nm to beyond 12 �m. It’s proprietary silver-based coating makes this 2.0 inch (50.8 mm) diameter mirror highly reflective from 0� to 45� and virtually insensitive to polarization. Protective dielectric coatings make it resistant to tarnish and oxidation. Plus it has minimal phase distortion, so it is useful for ultrafast-pulsed applications with Ti:Sapphire and other lasers.VIS-IR Bandpass Blocking Filter is an optional blocking filter to shape the spectral output of our 300 to 450 W UV Flood Sources (Simulators). 290 to 400 nm plus residual 650 to 800 nm typical spectral output when used with the 81017 atmospheric attenuation filter. Warning, the 87066 will break if used with lamp power greater than 450 W.
***MPN New Focus 5123 VIS – IR
***OEM Newport Research Corp (NRC)
***SKU*** 28340 -
Selection of Seven Borosilicate Crown Glass
$120.00This is a nice selection of seven crown glass singlets of various focal lengths in a special case. The lenses are uncoated and include the following Oriel part numbers:
4020 � 0.5 inch diameter, 13mm focal length
4022 � 0.5 inch diameter, 25mm focal length
4023 � 0.5 inch diameter, 38mm focal length
4024 � 0.5 inch diameter, 50mm focal length
4025 � 0.5 inch diameter, 75mm focal length
5-2425-150 � 1 inch diameter, 150mm focal length
Unknown part number � 1 inch diameter, 35mm focal lengthThe lenses are all unmounted. Each comes with a protective cloth holder.
Photo set 1791
***MPN 402x Series
***OEM Oriel Corp
***SKU*** 30001 -
25mm Diameter Plane Mirror, VIS Coating
$50.00This is a plane mirror of 25mm diameter and 6mm thickness. The back of the mirror carries a label with the part number BD 103 079 05 � VIS. The mirror appears to have an aluminum coating and is not transmissive. Condition is near-perfect.
Photo set 1786
***MPN BD 103 079 05
***OEM Balzers
***SKU*** 23196 -
Dichroic Mirror 2 Inch Diameter Frosted Back
$90.00This is a Dichroic Mirror 2 Inch Diameter with a Frosted Back.
This is a plane glass mirror with a dichroic coating. Specifications include:Diameter = 2.000 inches
Thickness = 0.501 inches
Polished on dichroic side, obverse is frostedAxially transmitted color is violet. Condition is excellent � no visible flaws.
Photo set 1785
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned,
recycled, refurbished & used Optical Mirrors for sale.Buy online or give us a call at 781-871-8868.We have experienced customer
service representatives standing by ready to help you!!**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you
if you prefer to use your own carrier..
We have over 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN
***OEM
***SKU*** 23195 -
Newport 900PH-1 1.0 Micron
$99.00Newport 900PH-1 1.0 Micron
It is easiest to quote the Newport website for specifications regarding this mounted pinhole:
�The 900PH-1 High Energy Pinhole Aperture is fabricated from ultra-thin molybdenum, a refractory alloy with high heat conductivity and melting point. This material exhibits almost no warping due to localized heating by the laser. A smooth 1 +/- 0.5 micron diameter hole with extremely low ellipticity is produced using laser drilling techniques. These pinholes have a laser damage threshold of 75 MW/cm2 CW and are suitable for pulsed laser use up to 700 mj/cm2.�
This pinhole comes mounted into a square steel housing with pin and is intended for use in the Newport Model 900 spatial filter.
The mount of the pinhole states 10 microns, but either the decimal is missing or a 1 micron pinhole has been substituted for the original foil. The pinhole is perfectly round but is only visible with a fairly high magnification microscope.
***MPN 900PH-1
***OEM Newport Research Corp (NRC)
***SKU*** 23191 -
Mounted 2X Anamorphic Prism Pair, 780 – 1550 nm
$175.00Mounted 2X Anamorphic Prism Pair, 780 – 1550 nm
This anamorphic prism pair in a cylindrical mount is used to magnify a laser beam diameter in only one axis by a factor of 2x. Although not marked on the barrel, this was determined to be the prism pair used for the wavelength range of 780 to 1550nm by measuring the beam offset of the mount which was 5.7mm. (The only other 2x prism pair offered by Melles Griot has a 5.lmm offset).
The polarization state of the laser beam is unaltered. The prisms are coated to minimize reflection losses. Beam deviation may be altered by up to one degree, typically less. The output side of the housing is counterbored to accommodate interchangeable diode laser objectives in mounted cells (not included).
Input beam diameter can be up to 8 x 4mm. Outer black-anodized aluminum housing diameter is 30.15mm. Length is 38.1mm. Wavefront error held to less than � wave at 830nm.
The prism system is in superb condition both optically and cosmetically. The set screw for retaining the optional objective is absent.
***MPN GPA-2X-8.0-830
***OEM Melles Griot
***SKU*** 23146 -
Mod. 3700.1 Linear Stage with Bautz Motor 36“ Range
$750.00This linear stage has a travel of 36 inches. The carriage is 158mm long and 88mm wide. The guide track profile is 58mm wide and 37mm thick. Running parallel with the guide track is a ball-screw actuated by a Bautz permanent magnet motor. End plates are approximately 7 inches wide and 3 inches tall. Overall length of the assembly including motor housing is 59.5 inches.
Information on the Type plate on the carriage includes ‘Deutsche Star Model 3700.1, Typ 0325.301.05’. There is also a date, 4 May 1992
Information on the motor includes ‘Bautz Antriebs und Steuerungstechnik Permanent Magnet Motor, Typ E 589 MGB 5000-1. The electrical cable from the motor has no connector but they are of substantial length. There is no encoder mechanism
The assembly is in excellent condition with a small trace of localized corrosion present. Motion is very smooth throughout range (lead screw turned manually).
***MPN 032.301.05
***OEM Deutsche Star
***SKU*** 23183 -
Main Control Panel Module
$600.00This is the main user interface for the Nikon Optistation 3 wafer inspection system. The module includes the control panel as well as all the associated circuit boards and cables. Please note that only the circuit boards and cables that are permanently attached to the board are included. One twisted pair cable has been cut (to the emergency cut-off switch).
The panel is in excellent condition although we are unable to test it for functionality.
Photo set 1716
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN OptiStaion III
***OEM Nikon
***SKU*** 23131 -
ISP GE-W-25-2 Ge IR Window
$50.00ISP Optics GE-W-25-2 Germanium Infrared Window
Diameter: 25mm
Thisckness: 2mm
Specifications:
– Dia tolerance: +0, -0.005″(+0, -0.13mm)
– Th tolerance: �0.005� (�0.13mm)
– Clear Aperture: 85%
– Parallelism: 3 arc min
– Flatness: 1/10 wave at 10.6 um
– Surface Finish: 40/20***MPN GE-W-25-2
***OEM ISP Optics
***SKU*** 28028
