grid button list button

Showing 1–20 of 288 results

  • UNMOUNTED VISIBLE ACHROMAT, ar-COATING: 400-700NM

    $75.00

    UNMOUNTED VISIBLE ACHROMAT, ar-COATING: 400-700NM

    D= 25.4mm F= 500.0mm  03

    02.5mm
    499.9mm
    (A1) 400nm-700nm RAVG<0.5%
    486.1nm 587.6nm 656.3nm
    BAG 05/23/2006
    05/23/2006TO
    05/23/2006TO ACHROMATIC DOUBLET, D=25.4mm, f=502.5mm
    SF2BK7
    AC254-500-A17373-E01
    B
    25.4
    1.000
    5 4 3 2 1
    MATERIAL:
    PART NO.
    TOLERANCES
    PROPRIETARY AND CONFIDENTIAL
    DIMENSIONS ARE IN INCHES
    LINEAR TOLERANCES:
    TWO PLACE DECIMAL: 0.010
    THREE PLACE DECIMAL: 0.005
    ANGULAR: 30′
    SURFACE FINISH: 32 MICROINCHES
    PARALLELISM: 0.002
    FLATNESS: 0.002
    STRAIGHTNESS: 0.002
    CONCENTRICITY: 0.002
    PERPENDICULARITY: 0.002
    THREAD: CLASS 2 FIT
    DRAWN
    ENG APPR.
    MFG APPR.
    NAME
    TITLE:
    SIZE
    A REV.
    SCALE: 1:1 SHEET 1 OF 1
    THE INFORMATION CONTAINED IN THIS
    DRAWING IS THE SOLE PROPERTY OF
    THORLABS, INC. ANY REPRODUCTION
    IN PART OR AS A WHOLE WITHOUT
    THE WRITTEN PERMISSION OF
    THORLABS, INC. IS PROHIBITED.
    UNLESS OTHERWISE SPECIFIED:
    DWG. NO.
    REV. # DESCRIPTION: NAME/DATE:
    DATE
    THORLABS INC. PO BOX 366
    NEWTON NJ
    FOCAL LENGTH:
    BACK FOCAL LENGTH:
    FOCAL LENGTH TOLERANCE: ±1%
    COATING:
    DESIGN WAVELENGTH:
    DIAMETER TOLERANCE: +0.00/-0.10mm
    SCRATCH/DIG: 40/20
    CENTRATION: ≤ 3 ARCMIN
    CLEAR APERTURE: > 90% OF DIAMETER
    OPERATING TEMPERATURE: -40˚C TO 85˚C
    *NOTE: ALL DEMENSIONS IN MILLIMETERS

    Add to cart

  • Crystek Saw Band Pass Filter

    $36.00

    Crystek corporation Band Pass Filter

    Mfr # CBPFS-0915

    Signal conditioning

    915 MHZ.CBPFS 0915

    it is the  buyers responsibility to verify compatibility before purchase.

     

    Add to cart

  • Hilger and Watts T.P. 103 Penta Prism

    $850.00
    Add to cart

  • Newport 10BC16NP.7 Non-Polarizing Cube

    $275.00

    Newport 10BC16NP.7 Non-Polarizing Cube
    Good Condition
    Check BMI Stock for More Items
    ***75784***

    Add to cart

  • Techtongda 360 Degree Mini Prism

    $850.00

    Techtongda 360 Degree Mini Prism
    New
    Check BMI Stock for More Items
    ***75620***

    Add to cart

  • Thorlabs QF4050CM1 Fabry-Perot Quantum Cascade Laser

    $1,500.00

    Thorlabs QF4050CM1 Fabry-Perot Quantum Cascade Laser
    New
    Check BMI Stock for More Items
    ***74153***

    Add to cart

  • Newport Research Model 900 LC-V-SET Collimator Laser

    $2,000.00

    Newport Research Model 900 LC-V-SET Collimator Laser
    Excellent Condition
    Check BMI Stock for More Items
    ***74143***

    Add to cart

  • Edmund Optics 5MM HT RA FS Optical Prism

    $35.00

    Edmund Optics 5MM HT RA FS Optical Prism
    New
    Check BMI Stock for More Items
    ***72375***

    Add to cart

  • Dove Prism Optical Lens (brand new; never used)

    $300.00

    Dove Prism Optical Lens (brand new; never used)
    New
    Check BMI Stock for More Items
    ***70941***

    Add to cart

  • Mounted Optical Prism for Laser Equitment

    $250.00

    Mounted Optical Prism for Laser Equitment
    Good Condition
    Check BMI Stock for More Items
    ***70786***

    Add to cart

  • Thorlabs Optical Prism for Laser Equitment

    $265.00

    Thorlabs Optical Prism for Laser Equitment
    Good Condition
    Check BMI Stock for More Items
    ***70453***

    Add to cart

  • D-Link Mounted Sphere Projector

    $45.00

    D-Link Mounted Sphere Projector
    Good Condition
    Check BMI Stock for More Items
    ***65648***

    Add to cart

  • CVI Melles Griot P180-100-1047-UV Folding Prism

    $70.00

    CVI Melles Griot P180-100-1047-UV Folding Prism

    1″
    1047 nm
    UV Grade Fused Silica
    ***MPN P180-100-1047-UV
    ***OEM CVI
    ***SKU*** 64659

    Add to cart

  • National Photocolor ETP-NPX-9 Pellicle

    $400.00

    National Photocolor ETP-NPX-9 Pellicle

    Extra Thin Pellicle 2�m, � 10% (0.00008? � 10%)
    Laser Quality 1 fringe (1/2 wave) per inch
    Coating: 50/50 for HeNe
    ***MPN ETP-NPX-9
    ***OEM National Photocolor
    ***SKU*** 42460

    Add to cart

  • Newport PBS-2 Pellicle Beam Sampler, 74.9 mm

    $145.00

    This is a Newport PBS-2 Pellicle Beam Sampler, 74.9 mm
    – Clear Aperture: 51.6 mm
    – Average reflectivity: 8% from 375�2400 nm
    – Surface Quality: 40-20
    – Material: Polymer Film

    ***MPN PBS-2
    ***OEM Newport Research Corp (NRC)
    ***SKU*** 49954

    Add to cart

  • Mounted 2X Anamorphic Prism Pair, 780 – 1550 nm

    $175.00

    Mounted 2X Anamorphic Prism Pair, 780 – 1550 nm

    This anamorphic prism pair in a cylindrical mount is used to magnify a laser beam diameter in only one axis by a factor of 2x. Although not marked on the barrel, this was determined to be the prism pair used for the wavelength range of 780 to 1550nm by measuring the beam offset of the mount which was 5.7mm. (The only other 2x prism pair offered by Melles Griot has a 5.lmm offset).

    The polarization state of the laser beam is unaltered. The prisms are coated to minimize reflection losses. Beam deviation may be altered by up to one degree, typically less. The output side of the housing is counterbored to accommodate interchangeable diode laser objectives in mounted cells (not included).

    Input beam diameter can be up to 8 x 4mm. Outer black-anodized aluminum housing diameter is 30.15mm. Length is 38.1mm. Wavefront error held to less than � wave at 830nm.

    The prism system is in superb condition both optically and cosmetically. The set screw for retaining the optional objective is absent.
    ***MPN GPA-2X-8.0-830
    ***OEM Melles Griot
    ***SKU*** 23146

    Add to cart

  • Anamorphic Laser Beam Prism Pair 2.2x at 820nm

    $149.00

    This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.

    One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.

    � Anamorphic magnification – 2.2x
    � Beam offset – ~5mm
    � Antireflection coating 820 nm
    � Part number – 18-2009
    � Thread inside diameter – 1.08 inches
    � Base dimensions – 2.25 inches wide, 2.11 inches long
    � Centerline height, including base – approximately 1 inch

    These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.
    ***MPN 18-2009
    ***OEM Special Optics
    ***SKU*** 21474

    Add to cart

  • Anamorphic Laser Beam Prism Pair, ~3.5x

    $300.00

    This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.

    One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.

    � Anamorphic magnification – ~3.5x
    � Beam offset – ~5mm
    � Antireflection coating at 820nm
    � Part number – Unknown (probably 18-20??)
    � Thread inside diameter – 1.08 inches
    � Base dimensions – 2.25 inches wide, 2.10 inches long
    � Centerline height, including base – approximately 1 inch

    Beam profiler/reprofiler

    These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.

    ***MPN 18-20xx-series
    ***OEM Special Optics
    ***SKU*** 21473

    Add to cart

  • Anamorphic Laser Beam Prism Pair, 2.4x

    $199.00

    Anamorphic Laser Beam Prism Pair

    � Anamorphic magnification – 2.4x
    � Beam offset – ~5mm
    � Antireflection coating at 820nm
    � Part number – 18-2008
    � Thread inside diameter – (end plates missing)
    � Base dimensions – 2.25 inches wide, 1.98 inches long
    � Centerline height, including base – approximately 1 inch

    This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.

    One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.

    Beam profiler/reprofiler

    These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.
    ***MPN 18-2008
    ***OEM Special Optics
    ***SKU*** 21472

    Add to cart

  • Anamorphic Laser Beam Prism Pair 2.2x Mounted

    $199.00

    Special Optics 18-2009 Anamorphic Laser Beam Prism Pair, 2.2x, Mounted.
    used excellent condition.

    This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.

    One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.

    � Anamorphic magnification – 2.2x
    � Beam offset – ~5mm
    � Antireflection coating 860nm
    � Part number – 18-2009
    � Thread inside diameter – 1.08 inches
    � Base dimensions – 2.25 inches wide, 2.11 inches long
    � Centerline height, including base – approximately 1 inch

    These prisms housings do show very light signs of previous use, but the glass appears to be without flaws. Please note that photo of 820nm coating prism system was recorded twice – we have several of both types.

    BMI Surplus, Inc. has a huge inventory of new, used, pre-owned &
    recycled Lasers and Laser Accessories For Sale!

    Buy online or give us a call at 781-871-8868. We have experienced
    customer service representatives standing by ready to help you!

    **Handlng & Freight fees depend on your location. We
    will provide a freight quote to meet your individual needs and
    work with you if you prefer to use your own carrier.

    We have 32 years of experience shipping sensitive scientific
    instruments & industrial equipment. Be assured we ship with the utmost care!

    Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
    ***MPN 18-2009
    ***OEM Special Optics
    ***SKU*** 21448

    Add to cart