-
$149.00
Special Optics 18-2008 Anamorphic Laser Beam Prism Pair, 2.4x, Mounted
This device is used to selectively amplify an image (or beam) in one direction while leaving the orthogonal direction unchanged. A typical application is that of laser diodes in which the output beam cross-section is elliptical instead of circular. By suitable arrangement of a pair of triangular prism wedges, various anamorphic magnification ratios can be established.
One consequence of this modulation is that the output beam, while parallel to the input beam, is offset relative to the input beam in the direction of the modulation. Special Optics have housed these prism pairs in sturdy black anodized aluminum cells. The input and output faces are threaded with the proper amount of offset relative to each other.
� Anamorphic magnification – 2.4x
� Beam offset – ~5mm
� Antireflection coating ( at 820nm ?)
� Part number – 18-2008
� Thread inside diameter – 1.08 inches
� Base dimensions – 2.25 inches wide, 2.11 inches long
� Centerline height, including base – approximately 1 inch
These prisms housings do show very light signs of previous use, but the glass appears to be without flaws.
***MPN 18-2008
***OEM Special Optics
***SKU*** 21447
-
$500.00
EXC Prism, Reference Standard Type Equilateral Form Polished 2/S Material Kbr. Coating No Mount Special Sealed Container. Dimensions: Od 2.75″ X 2.75″ Ca Thk 2.25″ Radius Fl
Potassium bromide is transparent from the near ultraviolet to long-wave infrared wavelengths (0.25-25 �m) and has no significant optical absorption lines in its high transmission region. It is used widely as infrared optical windows and components for general spectroscopy because of its wide spectral range.
***MPN
***OEM PerkinElmer Inc.
***SKU*** GLS402
-
$75.00
Thorlabs BSX11 UVFS Plate Beamsplitter
01″ 90:10 (R:T) UVFS Plate Beamsplitter, Coating: 700-1100 nm, t = 5 mm
***MPN BSX11
***OEM Thorlabs
***SKU*** 61982
-
$145.00
Thorlabs BSW11R UVFS Plate Beamsplitter – Lot of 2
25 x 36 mm 50:50 UVFS Plate Beamsplitter, Coating: 700 – 1100 nm, t = 1 mm
***MPN BSW11R
***OEM Thorlabs
***SKU*** 61981
-
$95.00
Thorlabs MRA20-E03 Right Angle Prism Dielectric Mirror
20mm
750-1100nm
***MPN MRA20-E03
***OEM Thorlabs
***SKU*** 61978
-
$65.00
Thorlabs MRA25-M01 Right Angle Prism Mirror
Gold 25mm
***MPN MRA25-M01
***OEM Thorlabs
***SKU*** 61977
-
$30.00
10.5 X 10.5 XRight Angle Prism
coated 800-850nm at 0 deg
lot of 6
***MPN
***OEM Volac
***SKU*** 61520
-
$75.00
Pellicle Beamsplitter
ST-SQ UNC
1.5 inch OD
***MPN ST-SQ-UNC
***OEM
***SKU*** 61515
-
$145.00
Melles Griot 03 BSD 028 Broadband Dielectric Cube Beamsplitter
20.0 mm
1300-1600 nm
***MPN 03 BSD 028
***OEM Melles Griot
***SKU*** 15873
-
$95.00
Melles Griot 01 PRS 013/011 Right Angle Prism
15.0 mm
Protected Aluminum
***MPN 01 PRS 013/011
***OEM Melles Griot
***SKU*** 15872
-
$100.00
CVI Melles Griot BBS-650-1100-1025-45UNP Broadband Beamsplitter
25.4 mm Dia
6.35 Thk
650-1100 nm
***MPN BBS-650-1100-1025-45UNP
***OEM CVI
***SKU*** 15870
-
$60.00
Edmund Optics Prism RA 20MM – 45391
***MPN 45391
***OEM Edmund Optics Inc
***SKU*** 57337
-
$200.00
Newport 20Q40NC.1 Broadband Beam Sampler
50.8 mm Diameter
440-700 nm
***MPN 20Q40NC.1
***OEM Newport Research Corp (NRC)
***SKU*** 15864
-
$100.00
Melles Griot 03 PBS 075 Polarizing Cube Beamsplitter
20 mm
1300 nm
***MPN 03 PBS 075
***OEM Melles Griot
***SKU*** 15859
-
$85.00
Melles Griot 03 BSC 007 Cube Beamsplitter
20 mm x 20 mm x 20 mm
***MPN 03 BSC 007
***OEM Melles Griot
***SKU*** 15858
-
$175.00
Newport PBS-2C Pellicle Beamsplitter
74.9 mm
51.6 mm Clear
375-2400 nm, Coated
***MPN PBS-2C
***OEM Newport Research Corp (NRC)
***SKU*** 15855
-
$171.00
CVI AP-3X-10.0-830 Anamorphic Prism Pair
830 Wavelength
***MPN AP-3X-10.0-830
***OEM CVI
***SKU*** 57234
-
$80.00
Edmund Optics 32-551 High Tolerance RA Prism
Length of Legs 30.0 mm
Uncoated
350-2200 nm
***MPN 32-551
***OEM Edmund Optics Inc
***SKU*** 15829
-
$59.00
Newport LBD 1.00 Laser Beam Director
***MPN LBD – 1.00
***OEM Newport Research Corp (NRC)
***SKU*** 57208
-
$420.00
Thorlabs BS014 Non Polarizing Beamsplitter Cube on 3 Axis Mount
* Beamsplitter Cube, 700-1100 nm, 1″ glued to Newport Mount.
***MPN BS014
***OEM Thorlabs
***SKU*** 15800