Showing 641–660 of 3859 results

  • NaCl Window, 1.25 inches by 0.25, sealed in bag

    $35.00

    This is a sodium chloride window. Unable to check condition of the surface because it is wrapped within tissue. It should be assumed that the surface will probably need light repolishing.

    Material � NaCl
    Diameter � 1.25 inches
    Thickness � 0.25 inches
    Focal Length � flat window
    Surface finish � unable to check
    Container � wrapped in tissue within sealed plastic bag with desiccant tube

    ***MPN
    ***OEM
    ***SKU*** DP393

    Add to cart
  • NaCl Window Blank, 0.5 inches x 2mm, etched (x4)

    $30.00

    Sealed bag contains four sodium chloride optical window blanks. Windows are the better selected pieces from large lot stored in petri dish without desiccant. They will need to be polished both sides.

    Material � NaCl
    Diameter � 0.5 inches
    Thickness 2mm
    Focal Length � flat window
    Surface finish � mostly clear, but some surface damage
    Container � plastic bag containing four pieces, not individually wrapped, no desiccant

    ***MPN
    ***OEM
    ***SKU*** DP391

    Add to cart
  • NaCl Window, 50mm x 25mm x 6mm, Superb

    $40.00

    Sodium Chloride crystal window, 50mm long, 25mm wide, and 6mm thick. Crystal is sealed in plastic bag (two desiccant tubes in bag). Crystal is wrapped in tissue and could not be examined without opening. Like most salt windows, it should be assumed that this may need to be repolished. This lot consists of one crystal window.

    Material � NaCl
    Dimensions 50mm x 25mm
    Thickness � 6mm
    Focal Length � flat window
    Surface finish � could not evaluate � crystal wrapped in tissue inside sealed bag.
    Container � sealed plastic with paired desiccant tubes inside

    ***MPN
    ***OEM
    ***SKU*** DP389

    Add to cart
  • NaCl Window, 36mm diameter, 9mm thick,

    $30.00

    Sodium Chloride window, 36mm in diameter, 9mm thick. There is a significant fracture on one edge of the crystal approximately 14mm wide, and extending about 6mm from the edge. You will probably wish to repolish one side. Window was in unsealed bag with desiccant. Part number on padded envelope is #03609.

    Material � NaCl
    Diameter � 36mm
    Thickness � 9mm
    Focal Length � flat window
    Surface finish � very lightly etched on one side, other side appears blemish-free
    Container � cotton-padded cloth sleeve pouch with desiccant container.

    ***MPN
    ***OEM
    ***SKU*** DP386

    Add to cart
  • NaCl Window, 50mm x 40mm x 20mm, Corner

    $80.00

    This is a very large sodium chloride crystal window. Crystal has been bumped � there is a significant fracture in one corner that extends approximately 6mm diagonally into the plate, otherwise the window appears unflawed. This lot consists of one crystal window.

    Material � NaCl
    Dimensions 50mm x 40mm
    Thickness 20mm
    Focal Length � flat window
    Surface finish � visually perfect � significant flaw in one corner (see photo)
    Container � sealed plastic bag without desiccant

    ***MPN
    ***OEM
    ***SKU*** DP385

    Add to cart
  • NaCl Rectangular Window 50 x 40mm

    $119.00

    This is a very large sodium chloride crystal window.

    Material: NaCl
    Dimensions: 50 x 40mm
    Thickness: 20mm
    Focal Length: flat window
    Surface finish: visually perfect � very minor corner flaws (less than 0.5mm)
    Container: sealed plastic bag includes desiccant
    ***MPN
    ***OEM
    ***SKU*** DP384

    Add to cart
  • NaCl Window, 38mm x 19mm x 4mm, Superb

    $40.00

    This is an individual crystal sodium chloride window. The windows show trace evidence of adhesion to the tissue that wrapped them..

    Material � NaCl
    Dimensions 38mm x 19mm
    Thickness 4mm
    Focal Length � flat window
    Surface finish � very lightly etched
    Container � plastic bag individually wrapped in tissue, without desiccant

    ***MPN
    ***OEM
    ***SKU*** DP383

    Add to cart
  • NaCl Windows, 38mm x 19mm x 4mm, Some

    $50.00

    This is a quantity of three sodium chloride windows. All of the windows show some adhesion to the tissue that wrapped them, one a bit worse than the others. They will need to be repolished both sides.

    Material � NaCl
    Dimensions 38mm x 19mm
    Thickness 4mm
    Focal Length � flat window
    Surface finish � moderately etched
    Container � plastic bag individually wrapped in tissue, without desiccant

    ***MPN
    ***OEM
    ***SKU*** DP382

    Add to cart
  • Unknown Salt Window ~1.550 inches by < 0.25

    $60.00

    This lot consists of two windows of an unknown salt crystal. They are suspended inside fiberboard tubes by slightly smaller tubes inserted into either side of the larger tube. I did not wish to remove the tubes, so I can only guess at the thickness, being on the order of 0.15 to 0.25 inches. The diameter is less than 1.6 inches, and may be as small as 1.550 inches. The crystal windows are in excellent condition � I could not detect any degradation. The outer tubes are lined with desiccant packages. There appear to be two identical windows � unfortunately, no markings as to compound, or dimensions. Listing includes both pieces.

    Material � Unknown
    Diameter 1.6 inches
    Thickness 0.15 � 0.25 inches
    Focal Length � flat window
    Surface finish � visually excellent

    ***MPN
    ***OEM
    ***SKU*** DP381

    Add to cart
  • Salt Window 2.16 x 0.25 inches

    $200.00

    This is a large window of an unknown salt crystal.

    Material � Unknown
    Diameter = 2.158 inches
    Thickness = 0.25 inches
    Focal Length � flat window
    Surface finish � visually superb
    Container � tissue wrap without desiccant

    Location MB 112
    Photo set 814.

    Salt window only.
    Micrometer in photo is NOT included..

    BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Optical Windows & Flats for sale.
    We will work with you individually to find the perfect set up for your application.

    Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

    BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
    We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
    You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.

    **Shipping, Handling & Freight fees are dependent on your location.
    We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
    We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!

    Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
    ***MPN
    ***OEM Custom
    ***SKU*** DP379

    Add to cart
  • KBr window, 1.587 x 0.171 – Needs Repolishing

    $30.00

    Large KBr salt crystal window with surface flaws (caliper not included)

    Material � Potassium Bromide
    Diameter 1.6 inches
    Thickness 0.17 inches
    Focal Length � flat window
    Surface finish � strongly etched, (with foreign contaminants?)
    Container � Plastic box with tissue lining, no desiccant.

    This crystal will need to be repolished � one face appears to have some contaminants on the surface, the other face is lightly etched. Box is marked �KBy� but outside edge of crystal is correctly marked KBr.

    ***MPN
    ***OEM
    ***SKU*** DP378

    Add to cart
  • Ealing 50mm Diameter Neutral Density Filter Set

    $400.00

    This is a very nice selection of Ealing neutral density filters. All the filters are 50mm in diameter, five of which have plastic cells. Clear aperture of the filters within the cells is 40mm. The filters appear to have a quartz substrate (they are very light, and Ealing typically used quartz for their reflective neutral density filters). Two filters do not have the plastic rings, nor is their any indication of transmission directly on the filters, however there are labels in the cabinet that match the transmission characteristics observed in the filters.

    The list of filters includes
    ND 0.1 � no cell, reflective type
    ND 0.3 � in Ealing Cell, reflective type
    ND 0.6 � in Ealing Cell, reflective type
    ND 1.0 � in Ealing Cell, reflective type
    ND 2.0 � in Ealing Cell, reflective type
    ND 3.0 � in Ealing Cell, reflective type
    ND 4.0 � no cell, reflective type, sandwiched

    All of the filters are in perfect condition with the exception of the ND 3.0, which appears to have several microscopic pin-holes. There is also a darkish blemish on the surface of the filter (visible in the third photo), but this does not seem to show up in transmitted light. The filters are supplied in a nice fitted walnut cabinet with elastic retaining bands. There are no transmission curves for any of the filters.

    BMI Surplus, Inc. is your #1 resource for new, pre-owned &
    refurbished optical equipment, optical tables, laser tables, legs and bases. We
    will work with you individually to find the perfect set up, for
    your application.
    Buy online or give us a call at 781-871-8868. We’re here ready
    to help you!
    **Shipping & Freight fees are dependent on your location. We
    will provide a freight quote to meet your individual needs and
    work with you if you prefer to use your own carrier. We have 30
    years of shipping sensitive scientific & industrial equipment.
    We ship with the utmost care!!

    ***MPN
    ***OEM Ealing / Beck
    ***SKU*** DP372

    Add to cart
  • Van Keuren set of four Optical Flats in case

    $550.00

    This is an extraordinary set of Van Keuren fused-quartz optical flats complete with fitted hardwood cabinet. The set consists of three flats of two inch diameter and one flat of three inches diameter. All are 0.625 inches in thickness.

    All four flats are accurate to 1 millionth of an inch on both surfaces. The three inch flat is marked 1CC for the bottom, 1CV for the top. All of the two inch flats are marked similarly � 1CV for the bottom and 1CC for the top. CV denotes �convex�, and CC denotes �concave�. I believe these are the highest grade flats that were commercially manufactured by Van Keuren, otherwise known as the �Reference� accuracy.

    The flats are in absolutely flawless condition � there are no chips, scratches, or other blemishes on any of the surfaces. There is a current calibration sticker affixed to the cabinet (due date is 31 August 2010).

    Location MB 94.

    Photo set 761..

    BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Optical Windows and Flats for sale.
    We will work with you individually to find the perfect set up for your application.

    Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

    BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
    We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
    You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.

    **Shipping, Handling and Freight fees are dependent on your location.
    We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
    We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!

    Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.

    ***MPN
    ***OEM Van Keuren
    ***SKU*** DP329

    Add to cart
  • Large Achromat Objective, 125mm Diameter, 600mm

    $875.00

    This is a very large precision achromat objective mounted in a cell with a standard size 13.7mm pin. The cell, finished in a crinkle black, has an outside diameter of 140mm, and is 77mm deep. The top of the post is 100mm from the optic axis of the objective.

    Mounted within the cell is a cemented doublet achromat lens of 125mm diameter (the cell reduces the clear aperture to 120mm). The lens does have a MgFl coating. The focal length is relatively short for the diameter � only 600mm. We have a pair of identical lenses in identical mounts but we have listed them individually. The price listed is for a single objective in mount.

    The lens is in excellent condition � no separation and no blemishes on the glass or in the coatings.
    ***MPN
    ***OEM
    ***SKU*** DP268

    Add to cart
  • GTE Sylvania Optical Attenuator Model 485

    $500.00

    SKU DP124

    Add to cart
  • Laser Calcite Polarizing Prism

    $199.00

    We are not sure of the manufacturer of this item � it has no maker�s markings anywhere.
    We suspect Wollaston may be the manufacturer.

    This is a holder with a calcite prism installed. It splits an incident laser beam (shown in the photos with a small HeNe laser) into two beams perpendicularly polarized to each other. One beam appears to be much more divergent than the other, but this was not tested on an optical bench so no measurements were made. However, the beam that is �single� seems to process about the beam with the ghost images. I am not sure if the prism is a single oriented crystal of Calcite, or if it is actually a type of Wollaston prism. As can be seen in the third photo, the beam is split into two primary beams, one of which has the ghost reflections. I took additional photos with a polarizer alternately blocking the primary beam, and after a 90-degree rotation, the secondary (extraordinary) beam.

    The cell mounting for the prism is 1 inch in diameter, not including the cap. The larger aperture on the smaller diameter side is about 5mm, that of the �cap� only about 3mm. There are two scribe marks on the cap which I would have thought indicated the permitted vibration directions of each beam, but they appear to be turned relative to the plane of polarization (perhaps the holder for the cell has the matching indications similarly offset).

    The holders and prisms appear to be in perfect condition. The prism has some sort of anti-reflective coating but I am not sure what it is, or if it is optimized for a particular wavelength region. The prism appears to be approximately 7 or 8 mm square, but I was unable to measure this since access to the prism is precluded by the cap.

    BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Laser Equipment for sale.
    We will work with you individually to find the perfect set up for your application.
    Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

    BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
    We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
    You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
    *Pricing on untested items is discounted at time of listing.

    **Shipping, Handling & Freight fees are dependent on your location.
    We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
    We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!!
    ***MPN
    ***OEM Brand Unmarked
    ***SKU*** DP097

    Add to cart
  • Black Increments On Clear Precision Scale

    $80.00

    This item is a used Rolyn 70.0166 reticle in excellent condition with no visible flaws. This item came from a working environment but has not been tested. Please call us for more information.

    Manufacturer Specifications:
    – Type: Scale 0-.1 inch
    – Size (mm): 21 dia x 1.0 thick
    – Material: Glass
    – Pattern: Scale 0.1″ in 0.001″ divisions

    ***MPN 70.0166
    ***OEM Rolyn Optics Co
    ***SKU*** GLS415

    Add to cart
  • Etched Pinhole On Metal Foil Precision Pinhole

    $25.00

    This item is a Rolyn 70.* Series optical pinhole.

    From manufacturer website: These apertures are ideally suited to Laser Beam cleaning, holographic and spatial filtering applications. Selected for size and roundness. Edge distortion is minimal. Substrates are 9.5 � .05mm diameter stainless steel (grade 304) with aperture centered to � .05mm.

    – Aperture: 30 um (untested)..

    This piece has not been tested. It may or not be working and may
    or may not be
    complete. Testing is not available for this item.
    This item is being sold As Is and is a final sale with no right
    of return.
    Feel free to call prior to purchase with any questions.

    BMI Surplus, Inc. is your #1 resource for new, pre-owned,
    recycled, refurbished & used optics, optical tables, laser
    tables, vibration isolation systems, legs and bases & optical
    support & optical accessories. We will work with you
    individually to find the perfect set up for your application.
    Shop our Optical Tables for the most competitive optical table
    price. Buy online or give us a call at 781-871-8868. We’re here
    ready to help you!
    **Shipping, Handling & Freight fees are dependent on your location. We
    will provide a freight quote to meet your individual needs and
    work with you if you prefer to use your own carrier. We have 30
    years of experience shipping sensitive scientific instruments &
    industrial equipment!

    Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.

    ***MPN 70. Series
    ***OEM Rolyn Optics Co
    ***SKU*** GLS412

    Add to cart
  • Equilateral Prism, Reference Standard

    $500.00

    EXC Prism, Reference Standard Type Equilateral Form Polished 2/S Material Kbr. Coating No Mount Special Sealed Container. Dimensions: Od 2.75″ X 2.75″ Ca Thk 2.25″ Radius Fl

    Potassium bromide is transparent from the near ultraviolet to long-wave infrared wavelengths (0.25-25 �m) and has no significant optical absorption lines in its high transmission region. It is used widely as infrared optical windows and components for general spectroscopy because of its wide spectral range.
    ***MPN
    ***OEM PerkinElmer Inc.
    ***SKU*** GLS402

    Add to cart
  • Melles Griot 01LA0111 Achromat 18.0mm Lens

    $35.00

    Melles Griot 01LA0111 Achromat 18.0mm Lens
    ***MPN 01LA0111
    ***OEM Melles Griot
    ***SKU*** 64612

    Add to cart