-
$50.00
This unit is a Zinc Selenide (ZnSe) Reflector .750 x .080 inch Dimensions.
S1: plano; 90%R#3. S2: plano;AR#1 @2.6 to 2.9um. 1 Min Wedge.
***MPN
***OEM II-VI, Inc.
***SKU*** 15630
-
$23.00
Filter Basket St/St K40 T/Port
***MPN d154-05-146
***OEM Edwards
***SKU*** 15172
-
Filter Bronze
***MPN d021-58-016
***OEM Edwards
***SKU*** 15143
-
$350.00
Newport 925B Compensated Attenuator.
The 925B Compensated Attenuator provides high resolution intensity control without introducing a gradient in the intensity distribution or a change in the beam propagation direction. The optical density can be varied from 0.16 to 3.0 through a top-mounted adjustment knob. It has a 1/2 inch (12.7 mm) diameter aperture. Attenuation is achieved by moving two matched BK 7 wedged filters in opposing directions. The filters have a linear-variable aluminum neutral density coating and a broadband antireflection coating. The slight wedge in the filters displaces any secondary reflections off-axis. The filters are matched for minimal beam deviation.
***MPN 925B
***OEM Newport Research Corp (NRC)
***SKU*** KM148
-
$35.00
- 12.5 x 50 TS C
- MgF2 coating
***MPN NT32317
***OEM Edmund Scientific
***SKU*** JS0279
-
$169.00
As per the Newport website:
The 20B20NC.1 Broadband Beam Sampler is a 2.0 inch (50.8 mm) diameter, 9.40 mm thick, BK7 beam sampler with a lambda/10 surface flatness. It is 440-700nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel reflection for beam monitoring applications where minimum disturbance of the transmitted beam is necessary
***MPN 20B20NC.1
***OEM Newport Research Corp (NRC)
***SKU*** JS0278
-
$169.00
Newport 20B10NC.1 Broadband Beam Sampler
Back surface: 440-700nm AR
As per the Newport website:
The 20B20NC.1 Broadband Beam Sampler is a 2.0 inch (50.8 mm) diameter, 9.40 mm thick, BK7 beam sampler with a lambda/10 surface flatness. It is 440-700 nm anti-reflection coated on the back surface. Our broadband beam samplers are designed to split off or sample a beam by Fresnel reflection for beam monitoring applications where minimum disturbance of the transmitted beam is necessary.
***MPN 20B10NC.1
***OEM Newport Research Corp (NRC)
***SKU*** JS0277
-
$175.00
As per Newport Website:
The F-LA40B Laser Diode Multielement Objective Lens has been specially designed for collimating and focusing laser diodes as well as fiber coupling. This version has a 0.40 Numerical Aperture (NA) and a 6.24 mm focal length with 5 mm clear aperture. lenses. These lenses have all been corrected for the standard laser diode cover glass. Our multi-element lenses are precision optics with diffraction limited performance. They offer the best solution for more critical applications. The F-L40B has a triple V-coating for peak transmission at 800, 1300, and 1550 nm. These lenses offer an economical solution without sacrificing performance. These objectives are packaged in a microscope objective housing with standard RMS thread. They are compatible with our F-Series fiber coupling devices and ULTRAlign™ fiber positioners
This unit is on a mounting plate with base.
***MPN F-l40
***OEM Newport Research Corp (NRC)
***SKU*** JB1083
-
$16.00
Spatial filter apertures for US Laser spatial filter carriers. Assorted sizes, these apertures all thread into the centerable carrier for spatial filters. The apertures are of various materials including brass, standard steel, and stainless steel. Aperture sizes include 0.055, 0.065, 0.070, 0.075, and 0.080. All apertures are 1 inch long (not including thread, and are knurled for easy insertion and removal.
Apertures are in very good condition. They are all from Nd YAG laser systems that have been deactivated. This listing is for a single aperture. If you have a preference for a particular diameter, please let us know and we will try to comply.
This piece has not been tested. It may or not be working and may
or may not be complete. Testing is not available for this item.
This item is being sold As Is and is a final sale with no right
of return..
Feel free to call prior to purchase with any questions.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM US Laser
***SKU*** DP478
-
$80.00
Small crystal of potassium tetrafluoronickelate, approximately 0.2 x 0.3 x 0.2 inches, with some surface degradation, in small plastic box sealed with dessicant. N2NiF4 crystals are important in the development of high-temperature super-conductors. The crystal surface does have some oxidation, as can be seen from the photos.
Location MB 112
Photo set 815..
***MPN
***OEM
***SKU*** DP380
-
$150.00
This is an Ealing mounting blank disk. It is threaded for use with components that are outfitted with the 5 inch 12 TPI standard mounting ring as found on their Research Precision Optical Bench. The disk does have a threaded hole in the center (as supplied from Ealing, it would have only had a small pilot countersunk hole). There are also a couple of small counterbored holes in the disk..
***MPN 23-1787
***OEM Ealing / Beck
***SKU*** DP217
-
$1,600.00
A Babinet Soleil Compensator ( BSC ) is placed between two crossed polarizers ( axes perpendicular to each other ) in such a way that the linear input polarization from the first polarizer is at 45 degrees to the fast axis of the compensator. Viewing through the second polarizer in a white light source, a black cross ( Null ) is observed at zero reading of the micrometer. This is zero retardation reading of the BSC. An unknown retardation to be measured is introduced between BSC and the polarizer. The BSC micrometer is turned until the black cross ( Null ) is observed again. The micrometer reading is an indirect measure of unknown retardation. A calibration chart is provided with each BSC which gives retardation in waves at a specific wavelength vs the micrometer reading.
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Polarizers and Retardation Plates for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN K1148
***OEM Karl Lambrecht Corporation
***SKU*** 15474
-
$125.00
This SSG TTA M3r blank is ready to be cut and polished to meet your needs.
It is 1" think and 6" in diameter..
***MPN 1532016
***OEM SSG
***SKU*** 12573
-
$200.00
Spectra-Physics 310A Mounted Double Fresnel Rhomb Polarization Retarder
Untested.
Needs some dusting/cleaning, no visible damage to glass
***MPN 310A
***OEM Spectra Physics, Inc.
***SKU*** 2060
-
$125.00
ZERODUR
CONCAVE PLANO MIRROR
POLISHED BOTH SIDES
2120mm RAD
NO COATING
DIAMETER 3″
***MPN 2120
***OEM Zerodur
***SKU*** 2046
-
$500.00
Equilateral Prism, Reference Standard 6″ x 6″
***MPN
***OEM PerkinElmer Inc.
***SKU*** 2012
-
$1,995.00
II-VI, Inc. Silicon (Si) Reflector specifications:
– 9″ Diameter x 2.362″
– Copper colored coating one side (coating has laser damage spot in the center)
– Possibly designed for CO2 laser system.
***MPN
***OEM II-VI, Inc.
***SKU*** KM1225
-
$1,995.00
II-VI, Inc. 7R028067 Silicon (Si) Reflector, 9″ Diameter
Great Condition – almost new!
***MPN 7R02867
***OEM Laser Power Optics
***SKU*** KM1224
-
$500.00
EXC Prism, Reference Standard Type Equilateral Form Polished 2/S Material Nacl. Coating No Mount Special Sealed Container. Dimensions: Od 2.75″ X 2.75″ Ca Thk 2.25″ Radius Fl.
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping, Handling & Freight fees are dependent on your
location. We will provide a freight quote to meet your
individual needs and work with you if you prefer to use your own
carrier. We have 30 years of experience shipping sensitive
scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on
the top right hand corner of this page to customize your search.
***MPN
***OEM Custom
***SKU*** GLS422
-
$500.00
EXC Prism, Reference Standard Type Acute Form Polished 2/S Material Csi. Coating No Mount Special Sealed Container. Dimensions: Od 2.25″ X 2.25″ Ca Thk 1.00″ Radius Fl
***MPN
***OEM Custom
***SKU*** GLS421