Showing 1521–1540 of 6324 results
-
Eaton EPBZ91 ePDU Basic Distribution Unit 24A IN: L6-30P Out: 10 x C13
$60.00Eaton EPBZ91 ePDU Basic Distribution Unit 24A IN: L6-30P Out: 10 x C13
Thiis unit came from a working environment
Input: 250V~;30A;50/60Hz
Output: 250V~;50/60HZ
C13 Group: 12A
20A MAX EACH BRANCH
24A MAX TOTAL
***MPN EPBZ91
***OEM Eaton Corporation
***SKU*** 62190 -
Cushioned Loop Clamp 1/2″ – Lot of 18
$40.00Sure-Grip Cushioned Metal Loop Strap
300 Series SS
Silicone Cushion for 1-1/2″
***MPN
***OEM Brand Unmarked
***SKU*** 63073 -
Umpco Cushioned Loop Clamp MS21919WCH6 – Lot of 18
$35.00Umpco Cushioned Loop Clamp MS21919WCH6 – Lot of 18
***MPN MS21919WCH6
***OEM UMPCO Inc
***SKU*** 63072 -
Cushioned Loop Clamp 1/2″ – Lot of 18
$35.00Sure-Grip Cushioned Metal Loop Strap
300 Series SS
Silicone Cushioned
for 1/2″ OD
***MPN
***OEM Brand Unmarked
***SKU*** 63071 -
Cushioned Loop Clamp 1-3/4″ – Lot of 18
$40.00Sure-Grip Cushioned Metal Loop Strap
300 Series SS
Silicone Cushion
For 1-3/4″
***MPN
***OEM Brand Unmarked
***SKU*** 63070 -
Cushioned Loop Clamp 5/8″ – Lot of 17
$37.00Sure-Grip Cushioned Metal Loop Strap
300 Series SS
Silicone Cushion
For 5/8″ OD
***MPN
***OEM Brand Unmarked
***SKU*** 63069 -
Cushioned Loop Clamp Umpco Model MS21919WCH16 – Lot of 18
$40.00Cushioned Loop Clamp Umpco Model MS21919WCH16 – Lot of 18
***MPN MS21919WCH16
***OEM UMPCO Inc
***SKU*** 63068 -
Cushioned Loop Clamp 2″ – Lot of 18
$40.00Cushioned Loop Camp 2″ – Lot of 18…
Sure-Grip Cushioned Metall Loop Strap
300 Series SS
Silicone Cushion
For 2″OD
***MPN
***OEM Brand Unmarked
***SKU*** 63067 -
Cushioned Loop Clamp 1-1/4″ – Lot of 18
$40.00Sure-Grip Cushioned Metal Loop Strap
300 Series SS
Silicone Cushion’For 1-1/4″
***MPN
***OEM Brand Unmarked
***SKU*** 63066 -
Hoist Ring Jergens Part No: 115-023908-X001
$90.00Jergens Hoist Ring – 115-023908X001
NEW !!
3/8-15
1,000 LBS.
12 FT LBS of Torque
***MPN 115-023908-X001
***OEM Jergens Inc
***SKU*** 63063 -
Mobile Robots model P3-DX robotic research platform
$2,650.00Mobile Robots model P3-DX robotic research platform. Unit powers on with external power source. Motors turn when reset and motor buttons are pressed. No further testing performed.
Condition : Very good. Manual with unit. No charger or other accessories. Battery pack will no longer charge and needs replacement.
***MPN P3-DX
***OEM Mobile Robots
***SKU*** 62858 -
OptiTemp Chiller Model OTC-1.0W
$3,500.00This unit is in stock, tested, working and ready to go into service.
Anti-freeze has been added so that nothing will freeze while shipping…OptiTemp Chiller Model OTC-1.0W
– Capacity
– 4.5 KW
– 15,360 BTU/hr
– 1.28 tons
– Max Available Flow Range
– 5 GPM
– Pump (standard)
– 0.33 HP
– Compressor
– 1.5 HP
– Type H
– Internal Reservoir
– 2.5 Gallon
– Temp Stability
+/- 0.2 F
***MPN OTC-1.0WS-P4-216-EC2-M1L
***OEM Opti Temp Inc
***SKU*** 63056 -
Melin Tool Company General Purpose End Mill A-3232-L
$50.00Melin Tool Company General Purpose End Mill A-3232-L
This can be sharpened if desired or used as is
***MPN A-3232-L
***OEM Melin Tool Co
***SKU*** 62695 -
MicroTCA.1 systems cube 5 U 42 HP for 6 double AdvancedMC modules
$350.00MicroTCA.1 systems cube 5 U 42 HP for 6 double AdvancedMC modules
5 U, 42 HP cube system for 3 double mid?size and 3 double full?size AdvancedMC modules, 1 double full?size MCH and 1 double full?size PSU slot
Backplane with star topology, direct connections for S?ATA/SAS
Hot?swap fan module with cooling unit manager (CU EMMC), airflow from bottom to top
Air filter, exchangeable from front
Clock topology to PICMG AMC.0 R2.0
In accordance with PICMG MTCA.1 R1.0 specification
***MPN
***OEM MicroTCA
***SKU*** 62664 -
Neslab Coolflow System III Heat Exchanger
$2,500.00Tested, works well!!
Neslab Coolflow System III Heat ExchangerIncludes user manual
Specifications:
-Temperature Range: +5*C to +40*C
-Temperature Stability: +/- 1.0*C
– 230 Volts
– Three (3) Phase
– 15 Amps
– 60 Hz
– Pump is a TU 7This unit was tested with RV antifreeze and drained however, residual antifreeze may remain in unit.
No calibration has been performed.
As shown on the photo the pump cover is not available.Manufactures description:
The System III Liquid to Liquid Heat Exchanger is designed to remove heat
from water-cooled instruments. The unit consists of a heat exchanger, recirculation pump, PVC reservoir, and an analog controller.
***MPN Coolflow III
***OEM
***SKU*** 62663 -
Vision Engineering Dual 12 Volt 75 Watt Supply Unit
$60.00This is a Vision Engineering Dual 12 Volt 75 Watt Supply Unit
This item has not been tested.
***MPN
***OEM Vision Engineering
***SKU*** 62640 -
Differential amplifier Tektronix AM 4001
$75.00Tektronix AM 4001 Digital Amplifier
Manuals and hard carrying case included
***MPN AM 4001
***OEM Tektronix, Inc (TEK)
***SKU*** 62631 -
Prinzing Plug Lockout Model PLO23
$9.00Prinzing Enterprises Plug Lockout Model PLO23
***MPN PL023
***OEM Prinzing Enterprises
***SKU*** 62178 -
Dust Collector Aget 5C20-D1-SP Dustkop
$500.00This is a Aget Manufacturing 5C20-D1-SP Dustkop Dust Collector.
This unit came from a working environment but has not been tested..
***MPN 5C20-D1-SP
***OEM Aget Manufacturing
***SKU*** 62614 -
See All Dry Wet Sight Glass SA-15S
$20.00This is a Universal Liquid/Moisture Indicator. It has a 3/4″ sweat inlet and outlet
Unit has not been tested
***MPN SA-15S
***OEM See-All
***SKU*** 62597
