Industrial Process Equipment

Avionic Instruments Inc. 2A1000 1B Static Inverter

$250.00

This is a Avionic Instruments Inc. 2A1000 1B Static Inverter.

This unit was used for research.
We do not guarantee used avionic parts, equipment, or instruments.
It is the buyer�s responsibility to get the item checked, calibrated, and certified for use.
***MPN 2A10001B
***OEM Avionic Instruments
***SKU*** 15237

Add to cart

Little Giant Pump Company Magnetic Drive

$375.00

MD-HC Mag Hi Corrosive

MD-HC Series Highly Corrosive Solutions
Ryton Construction Little Giant’s
comprehensive line of magnetic drive pumps
is designed for circulation of acids, alkalis,
solvents, brine, plating solutions, sterile
solutions, and other special fluids, for use
in environments such as hospitals, chemical
companies, photo labs, dry cleaning plants,
car washes, machine shops, laboratories,
manufacturing plants, print shops and wineries.

Magnetic Pump Features:
Leakproof, seal-less magnetic drive.
No maintenance due to seal wear.
No seal friction to reduce motor horsepower.
Only chemical resistant materials are
in contact width fluids.
Magnetic coupling design acts as a clutch
to eliminate motor burnout and overloading
under adverse conditions.
Spindle shaft is supported at both ends to
prevent impeller damage during start-up
and stop of pump.
Magnet housing acts as an insulator to
prevent motor heat from being transferred
to the fluid being pumped.
All threaded intake and discharge ports are
USA (American) standard taper pipe threads (NPT).
Teflon tape is provided.
The MD-HC Series models have �run-dry�
capability.
Thermal overload protection.

BMI Surplus, Inc. is your #1 resource for new, pre-owned electric motors! Buy online or give us a call with any questions at 781-871-8868. We’re here ready to help you!
**Shipping & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of shipping sensitive scientific & industrial equipment. Be assured we ship with the utmost care!!
***MPN EP-7-MD-HC
***OEM Little Giant Pump Company
***SKU*** KM216

Add to cart

Kollmorgen Graduated Borescope Probe

$250.00

Kollmorgen Borescope, (Electro-Optical Division). Borescope, Measuring Long Probe, Serial number 382.

Rigid probe housing, with right-angle mounted prism in probe tip (side window). Overall length of probe body is 550mm (21 5/8 inches). Distal end of probe is 0.370 inches (for 7.750 inches � steps up to .875 inches in diameter (that portion is 13 inches long, with a conical connection between the two diameters. Large diameter is graduated in inches, with divisions every 0.100 inch.

Right-angle viewing with illumination via fiber optics. Fiber optic armor-clad, with illumination centering puck on distal end. Active bundle diameter is 0.162 inches. Length of fiber optic lead is approximately six feet. Diameter of adapter at fiber bundle end is 1.560 inches.

Magnification adjustment ring marked �magnification factor�, graduated from 1 to 8.5 (with 10 divisions between numbers). Changing this setting seemed not so much to change the magnification but the focus point of the borescope. The borescope is missing the ocular (captive threaded ring is present, but the ocular is missing). Using an ocular from another instrument I determined that the closest focus point is about 4.5 inches away from the side mirror, and by adjusting the ring, I was able to focus to infinity. Therefore this instrument is for looking into cavities � you cannot focus on the wall of a bore that isn�t much larger than the diameter of the probe.

BMI Surplus, Inc. has a huge inventory of new, pre-owned & recycled Industrial Process Equipment For Sale!!
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
**Shipping, Handlng & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search!!
***MPN
***OEM Kollmorgen
***SKU*** DP451

Add to cart

Machinists Translation Stage Small Dimensions

$40.00

This is a very small machinists translation stage. There are no fixture holes in the top surface but there is a bolt-hole pattern for securing the lower �fixed� plate of the stage. The stage uses a micrometer screw with a graduated (0.001� per division) knurled head to advance the table. The stage uses dovetail ways with an adjustable gib. There is no lost motion in the dovetail, and the adjustment screw has very little end-play. Total travel is a bit more than ��, and overall size of the upper (smooth) plate not including the side plate with the micrometer is 2.00� x 3.00�. Height of the stage is 0.910�. Construction is exclusively steel with the exception of the leadscrew nut which is of brass.

Location MB 51-2

Photo set 540.

BMI Surplus, Inc. has a huge inventory of new, pre-owned & recycled Industrial Process Equipment For Sale!!
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
**Shipping, Handlng & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Custom
***SKU*** DP108

Add to cart

Rudolph / FTM Film Thickness Monitor F. TR-1-R

$1,500.00

This is a Rudolph / FTM Film Thickness Monitor

Web information on this product:

The Rudolph Film Thickness Monitor (FTM) is an instrument to measure the thickness of films by means of a non-contact measurement method. Their method is based on the reflection of light from the surface and as such is a contactless probe. Considerable computation is required and unambiguous results are only obtained if it is known a priory that the film thickness lies within a specified range, usually 0 to about 3000 �. The optical techniques are based on the wavelength and/or angle of incidence dependence of the reflectivity.

Our unit does power on, but, as you may note from the pictures, we did not get a numeric reading in the display panel on the top left of the unit.

BMI Surplus, Inc. has a huge inventory of used, new, pre-owned, recycled and refurbished Semi Conduction Process Equipment for sale.
We will work with you individually to find the perfect set up for your application.

Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!

**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..

***MPN F. TR-1-R
***OEM Rudolph Research
***SKU*** 13373

Add to cart

Precision Motion Controls PWX-380 Indexer/Drive

$250.00

Precision Motion Controls PWX-380 Indexer/Drive.

Drive Specifications:
Performance (unloaded motor)
Repeatability: �5 arc-seconds (unidirectional)
Accuracy: �5 arc-minutes (bidirectional)
Step-to-Step Accuracy:�20 arc-seconds (unidirectional)
Hysteresis: �3 arc-minutes
Inputs (optically isolated)
Trigger inputs: 5
Status Outputs: 3
Sequence Inputs: 3
Power 95 to 130 VAC, 50/60 Hz, 2A
Processor 80188 with 2K battery-backed RAM
Environmental � Operating
Drive: 0 to 60 �C measured at the heatsink
Motor: 110 �C measured at the motor case
Ambient: 10 to 40 �C, 0 to 95% humidity, non-cond
Environmental � Storage
Motor + Drive: -40 to +80 �C, 0 to 95% humidity, non-condensing
Indexer Range
Position: �32,000,000 steps (1,250 revolutions)
Velocity: 0.001 to 35.000 rev/sec
Acceleration: 0.01 to 99.99 rev/sec2

Motor Specifications:
Static Torque (oz-in): 380
Rotor Inertia (oz-in): 10.24
Bearing Thrust Load (lb): 50
Bearing Radial Load (lb): 25
End Play for 1 lb Load (in): 0.005
Radial Play for 0.5 lb Load (in): 0.0008.

BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Automation Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.

**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..

***MPN PWX-380
***OEM Precision Motion Controls
***SKU*** 12563

Add to cart

Kollmorgen Graduated Borescope Probe

$250.00

Kollmorgen Borescope, (Electro-Optical Division). Borescope, Measuring Long Probe..

Rigid probe housing, with right-angle mounted prism in probe tip (side window). Overall length of probe body is 550mm (21 5/8 inches). Distal end of probe is 0.370 inches (for 7.750 inches � steps up to .875 inches in diameter (that portion is 13 inches long, with a conical connection between the two diameters. Large diameter is graduated in inches, with divisions every 0.100 inch.

Right-angle viewing with illumination via fiber optics. Fiber optic armor-clad, with illumination centering puck on distal end. Active bundle diameter is 0.162 inches. Length of fiber optic lead is approximately six feet. Diameter of adapter at fiber bundle end is 1.560 inches.

Magnification adjustment ring marked �magnification factor�, graduated from 1 to 8.5 (with 10 divisions between numbers). Changing this setting seemed not so much to change the magnification but the focus point of the borescope. The borescope is missing the ocular (captive threaded ring is present, but the ocular is missing). Using an ocular from another instrument I determined that the closest focus point is about 4.5 inches away from the side mirror, and by adjusting the ring, I was able to focus to infinity. Therefore this instrument is for looking into cavities � you cannot focus on the wall of a bore that isn�t much larger than the diameter of the probe.

There are two articulating right-angle joints that can be set at any angle and clamped in order to avail oneself of the most comfortable viewing position. There is no ocular included with this instrument.

***MPN
***OEM Kollmorgen
***SKU*** 00904

Add to cart

Flow Technology FT-16NENW-LEDS4 Turbine Flow Meter

$650.00

Flow Technology FT-16NENW-LEDS4 Turbine Flow Meter FT Series

1″ NPT Fittings.

***MPN FT-16NENW-LEDS4
***OEM Flow Technology Inc
***SKU*** 59199

Add to cart

Sloan Dektak IIA Stylus Profilometer

$1,400.00

This item is a Sloan Dektak IIA Stylus Profilometer.
Details:
– Catalog Number: 139933
– A stylus linearly scans the specimen surface and the variations of the tip height are recorded
– Maximum applied load: 0.5 mN (50 mg)
– Stylus tip radius: 12.5 �m
– Stylus scan range: 50 um to 30 mm
– Resolution vertical 1 nm; horizontal 50 nm
– Plots can be printed and test-format exported onto a computer
– Typical applications: Measurement of thin film thickness, film curvature measurement, roughness measurements

Notes: This listing is for the profilometer only – as pictured. The computer and accessories must be sourced separately.

BMI Surplus, Inc. has a huge inventory of used, new, pre-owned &
recycled Semiconductor Processing Equipment For Sale!

Buy online or give us a call at 781-871-8868.We have experienced
customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your
location. We will provide a freight quote to meet your
individual needs and work with you if you prefer to use your own
carrier. We have 32 years of experience shipping sensitive
scientific instruments & industrial equipment. We ship with the
utmost care!

Don’t see what you are looking for? Use our orange search box on
the top right hand corner of this page to customize your search.

***MPN Dektak IIA
***OEM Sloan Technology Corp
***SKU*** 44467

Add to cart

Lintech 3-axis Robot with Pendant Control Unit

$2,200.00

This is a Lintech 3-axis Robot with Pendant, Control Unit.
Lintech 3-axis robotic positioner. Flag rotation, up-down (motor missing, cable cut, but near where motor would hook in, so easy to splice new motor leads), and flag pitch.

�Manual Z-axis rotation through 360 degrees.
�Manual X-axis positioning of Z-axis (15 inch travel)
�Motorized Z-axis travel � 15 inches
�Flag pitch � plus or minus 90 degrees
�Flag rotation � limitless
�Flat surface area � 4 inches long, 5 inches wide
�Overall height with base � 51 inches (less Z-axis motor)
�Diameter of manual turntable � 12 inches.

Pendant control includes emergency stop.All motor drivers are present in the control housing.
Robot is exceptionally clean and everything works properly (with the exception of the missing Z-axis motor).

Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.

***MPN
***OEM Lintech
***SKU*** DP625

Add to cart