Showing 1561–1580 of 51849 results
-
Coaxicom RF Adapter 3077-9 (LOT OF 5)
$200.00Coaxicom RF Adapter 3077-9 (LOT OF 5)
3077-9 N Male (Plug) to SMA Female (Jack) RF Adapter (Passivated)
N to SMA RF Adapters are 50, DC-18 GHZ Stainless Steel Construction
-
Glenair Contact Pins M39029 / 84-450 (LOT OF 100)
$1,750.00Glenair Contact Pins M39029 / 84-450 (LOT OF 100)
MIL Spec Connectors
PR# 373-BB
-
Continuum SHG T – 1 30mm 617 – 8031
$500.00Continuum SHG T – 1 30mm 617 – 8031
Second Harmonic Generator
-
Optic Post 3″ x 1.5″
$18.00Optic Post 3″ x 1.5″
3″ optic Post 37.85mm diam.
1/4″ threaded Bore Hole
-
Camera Link simulator PCIe8 DVa CLS
Original price was: $500.00.$400.00Current price is: $400.00.Camera Link simulator PCIe8 DVa CLS
019-14009-00
The PCIe8 DVa CLS is a Camera Link simulator that generates simulated image data. It uses an easily modified text-based configuration script that describes the timing parameters of the camera to be simulated.
The PCIe8 DVa CLS has no frame buffer memory; image data is sent via DMA from host memory as required by the application. Internal counters can be used an alternative source of image data.
It is the buyer’s responsibility to verify compatibility before purchase.
-
-
ThorLabs Post Holder RSHT 1.5
$25.00ThorLabs Post Holder RSHT 1.5
RSHT1.5/M – Ø25 mm Post Holder with Flexure Lock, M6 Tap, L = 38 mm
Ideal solutions for mounting optical components with maximum stability and Height adjustment. They are designed to work with ThorLabs stainless steel posts.
The flexure design of the post holder supports the post in a clamping mechanism that is secured with a screw cap and hex key.
The circular groove allows the metal to flex and clamp the post’s position without breaking.
BMI Surplus has a variety of stainless steel posts in stock and ready for shipment.
-
Aeronautical Standard AN816-4J (LOT OF 8)
Original price was: $100.00.$80.00Current price is: $80.00.Aeronautical Standard AN816-4J (LOT OF 8)
Stainless Steel Flare Pipe to Tube Straight Adapter
Is the preferred alloy for fuel lines,
Pipe fitting adapter
Lot of 8 . Will work with buyer.
-
ThorLabs Dovetail Rail Carrier RC1
$15.00ThorLabs Dovetail Rail Carrier RC1
1″ (25.4mm)
1/4″(m6) Counterbore
-
Optical Table Clamps Variable Thickness (lot of 6)
$40.00Optical Table Clamps Variable Thickness (lot of 6)
4 OF THESE CLAMPS ARE 12.7 MM THICK
2 ARE 9.8 MM THICK
ALL 6 ARE 2.5″ LONG
-
RS3P 3″ Pedestal (Lot of 4)
$55.00RS3P 3″ Pedestal (Lot of 4)
Non Magnetic stainless steel Pedestal with 1/4″ threaded bore holes
-
-
Texas Instruments SNJ54LS193J Synchronous 4-Bit Up/Down Counters – LOT OF 144
$950.00Texas Instruments SNJ54LS193J Synchronous 4-Bit Up/Down Counters – LOT OF 144
-
Newport Laser Support Mount Model 810
$125.00Newport Laser Support Mount Model 810
This comes with its Newport micrometer that drives to control both tip and tilt
The Hole measures 1.5″ 38.1 mm
Thank you for shopping BMI Surplus
-
UniFi UVC-G3-FLEX Security Camera(indoor use only)
$85.00UniFi UVC-G3-FLEX Security Camera(indoor use only)
Dimensions Ø48 x 108 mm (Ø1.9 x 5.5″) Weight 170 g (6 oz) Enclosure material Polycarbonate Mounting material Polycarbonate Weatherproofing IPX4 Optics Sensor 2MP HDR sensor Lens EFL 4 mm, f/2.0 View angle Lens correction off: H: 87°, V: 47°, D: 104°
Lens correction on: H: 80°, V: 46°, D: 92°Night mode Built-in IR LED illumination and IR Cut filter Video Video compression H.264 Resolution 2MP 1920 x 1080 (16:9) Max. frame rate 25 FPS Image settings Brightness, contrast, sharpness, saturation, noise reduction, 50/60 Hz System Networking interface 10/100 MbE RJ45 port Max. power consumption 4W Power method PoE Supported voltage range 48V DC Button Factory reset Mounting Desktop, pole mount (Included)
Ceiling, pendant, wall mount (Sold separately)Operating temperature -20 to 40° C (-4 to 104° F) Operating humidity 20 to 90% noncondensing Certifications FCC, IC, CE Audio Microphone Yes (Can be disabled) Software Web application UniFi Protect Mobile app UniFi Protect iOS™ and Android™ -
Nimitz Second HDD Caddy for HP 2014
$15.00Nimitz Second HDD Caddy for HP 2014
- Add a 2nd drive to your laptop by replacing your optical drive
- Comes with matched Faceplate/Bezel and mounting bracket,fits perfectly
- Works in optical drive bay of HP Elitebook 8560p 8570p
- Accepts 2.5″, 12.5mm-high SATA hard drives or less,Also compatible with 2.5″ SSD
- The hard drive attaches to the caddy from the side using long screws( 3rd picture)
-
NAS1351-4H20P Socket Screw 1/4-28 x 1-1/4″ Cap Drilled Plated (lot of 65)
$25.00NAS1351-4H20P Socket Screw 1/4-28 x 1-1/4″ Cap Drilled Plated (lot of 65)
