Showing 12141–12160 of 51941 results
-
Bolex Viewfinder for Non-reflex lenses 16 to 150mm
$40.00Bolex Viewfinder for Non-reflex lenses 16 to 150mm,
This is a very nice condition Bolex finder for their non-reflex 16mm movie cameras. The finder has an adjustable field of view, from a wide angle 16mm lens to 150mm. Focal length of the lens is read in a small window on the top of the finder. The front standard of the finder, I believe, is designed to accept an auxiliary wide-angle lens so the field of view would approximate that of a 10mm focal length objective, however, that lens is not present. There is an additional knob on the left side of the finder that adjusts the finder for parallax, graduated in feet.
Condition is superb. The chrome does not have any corrosion nor are there any scuffs of any consequence. The leather inserts are also in near mint condition. Glass is very clear and image is excellent.
I am not quite sure of the age, but would guess somewhere in the early 1960’s. Marked Paillard Bolex.
This unit has not been tested. It may or not be working and may or may not be
complete. Testing is not available for this item.
This item is being sold As Is and is a final sale with no right of return.
Please call prior to purchase with any questions.BMI Surplus, Inc. is your #1 resource for used, new, pre-owned,
recycled & refurbished photo, audio & radio equipment!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment. Be assured we ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Paillard Bolex
***SKU*** DP018 -
Soligor 50mm f 3.5 Enlarger Lens
$35.01This is a fairly simple and inexpensive 35mm enlarging lens, that being a 50mm Soligor with an f stop range from 3.5 to 16. Aperture works smoothly and is graduated. Has standard 39mm mounting thread. Not sure of age – appears to be 1970’s vintage.
Lens is in very good condition, but does show some slight evidence of use. Glass is in very fine condition.
Location MB 42-5
Photo set 446
This piece has not been tested. It may or not be working and may or may not be
complete. Testing is not available for this item.
This item is being sold As Is and is a final sale with no right of return.
Feel free to call prior to purchase with any questions.BMI Surplus, Inc. is your #1 resource for used, new, pre-owned,
recycled & refurbished photo, audio & radio equipment!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment. Be assured we ship with the utmost care!!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN
***OEM Soligor
***SKU*** DP014 -
VAT 1.5″ Right Angle Electro-Pneumatic Valve
$250.001.5″ right angle VAT bellows sealed valve:
•115 Volt
•60 HZ Pilot Solenoid
•2.75″ Conflat Flanges – Rotatable
F27228
***MPN
***OEM VAT
***SKU*** CM225 -
Behlman BL135 Series AC Power Source/Frequency
$1,500.00Behlman BL 135 Series AC Power Source/Frequency.
1350 volts of power in a 3.5″ tall, rack-mount ready chassis.
Unit powers on but we do not have the capabilities to fully test this unit.Minus a couple scratches from transport, it is excellent cosmetic condition..
Specs are:-Input voltage: 120/208 VAC, 3 phase
-Input frequency: 47-440 Hz
-Output voltage: 0 – 135 VAC or
-0 – 270 VAC
-Output frequency: 45-500 Hz
-Resolution: 1 Hz
-Accuracy: +/-2 Hz
-Current: 10 Amps, 0-135V Range, 5 Amps, 0-270V with a resolution of 0.1A, +/-1 digit and accuracy of +/-2 % of full scale
-Crest factor: 3:1
-Power factor: 1–% pf rated output into any power factor load
-Distortion: 0.5% THD typical, measured at full load, 100V, 50Hz
-Unit does offer isolation input to output
-Parallelable for additional power or for 3 phase output0
-Unique overload protection prevents output distortion
-Remote DC programming for voltage and frequency
-True RMS readout of voltage and current
-Low cost without compromising features or performance.BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Power Supplies for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN BL1350C-4-L-332
***OEM Behlman
***SKU*** 14093 -
HP R422C Crystal Detector w/Opt 002 26.5-
$1,400.00WR-28 Crystal Waveguide Detector specs are:
Frequency response: ±0.6 dB
Maximum SWR: 1.78
Low-level sensitivity: > 0.42 mV/uW
Maximum input power (average): 100 mW
Video impedance: 1.5 kilo-ohm
RF bypass capacitance: 10 pF
Waveguide designator: EIA WR-28 MIL-W-85/3-008
Flange designator: UG-599/U MIL-F-3922/54-003
Output connector: BNC female.Detector was in good working order. when originally placed in inventory.
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Test Equipment for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN R422C
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 14090 -
Leitz 713 005 LAF 200 Module / Ergolux 200
$790.00Leitz LAF 200 Module / Ergolux 200
This item is the laser autofocus version of the Leitz Ergolux 200 Modulopak. It does not include any of the inserts (reflector inserts, diaphragm inserts), but it does have the complete laser auto focus attachment for the Modulopak portion. It does include the 0.8x tube lens as well as the bayonet changer for the viewing tube.
Leitz part number is 713 005. Manufacture date was 24 August 1995. Serial number is 139. The autofocus system is only that portion that attaches directly to the Modulopak � we do not have any cables, control panels, or control electronics. The drive motor for the Z-axis is also not present.
Cosmetic condition of the module is decent � there are a few scuff marks in the paint here and there but they are very minor. Unfortunately, we have no way to test the LAF system without the rest of the microscope and electronics. Cover to the laser compartment does not appear to have been tampered with � the MEL seal is still intact (the MEL division of Leica Microsystems was responsible for semiconductor instrumentation). The laser system is critically aligned at the factory and should never be tampered with!
BMI Surplus, Inc. has a huge inventory of new, pre-owned,
recycled & refurbished Microscopes, Microscope Parts & Microscope Parts and Components for sale.
We will work with you individually to find the perfect microscope or microscope parts for your application.Buy online or give us a call with any questions at 781-871-8868.
We have experienced customer service representatives standing by ready to help you!**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have over 32 years of experience of shipping sensitive scientific instruments & industrial equipment.
We ship with the utmost care!!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search. .
***MPN 713 005
***OEM Leitz
***SKU*** 14033 -
Extron DXP 88 SDI Matrix Switcher
$1,400.00Key Features
• Capable of switching 4fsc or 4:2:2 serial digital video transmission standards
• Automatic input cable equalization typically equalizes greater than 300 meters at 270 Mbps of Extron RG6 or equivalent high quality cable
• Automatically accepts four SMPTE serial digital data rates: 143, 177, 270, and 360 Mbps
• Output data muting when input source is lost
• 16 global memory presets
• RS-232 and RS-422 control portThese units are in beautiful physical condition and they are functioning as expected. They are guaranteed not DOA.
***MPN DXP 88 SDI
***OEM Extron
***SKU*** 14003 -
Rudolph / FTM Film Thickness Monitor F. TR-1-R
$1,500.00This is a Rudolph / FTM Film Thickness Monitor
Web information on this product:
The Rudolph Film Thickness Monitor (FTM) is an instrument to measure the thickness of films by means of a non-contact measurement method. Their method is based on the reflection of light from the surface and as such is a contactless probe. Considerable computation is required and unambiguous results are only obtained if it is known a priory that the film thickness lies within a specified range, usually 0 to about 3000 �. The optical techniques are based on the wavelength and/or angle of incidence dependence of the reflectivity.
Our unit does power on, but, as you may note from the pictures, we did not get a numeric reading in the display panel on the top left of the unit.
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned, recycled and refurbished Semi Conduction Process Equipment for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868.We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN F. TR-1-R
***OEM Rudolph Research
***SKU*** 13373 -
Vibra-Metrics Model 1030 Ultra Low Frequency
$500.00The Model 1030 is ideal for making high resolution structural and floor vibration measurements for sensitive equipment such as electron microscopes, micro-lithography for semiconductor fabrication, micro-machining and more. It includes a removable 1/4-28 mounting stud.
Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector
Comments1030 1Hz-180Hz 250�F(121�C) 7000 mV/g .7g peak SMA Coax, Side Very Low Frequency
We have multiple pieces available in inventory. They are connected to different style mounts but we are selling them exclusively for the Vibra-Metrics Model 1030 sensor and we cannot guarantee the style of mount, if any, that it will be attached to.
***MPN 1030
***OEM Vibra-Metrics
***SKU*** 12574 -
Elgar Series 9010-3341 Digital / Analog
$975.00The 9010 Programmable Plug-in Module is a digital / analog programmable plug-in oscillator that fits into the oscillator cavity of all the Elgar linear AC power sources except for the C series. The unit has a 12-key keyboard for local programming of amplitude and frequency, as well as a four-digit display which can be switched from the front panel to show frequency, amplitude, or what is being programmed. Amplitude Programming Accuracy: ?0.2% of full scale from 45Hz to 2kHz from 5% of full scale. Add ?0.02% per kHz above 2kHz. Load Regulation: ?0.015% no load to full load at point of sense (output of associated power amplifier or at load). Line Requlation: ?0.01% for a 10% line change within the associated power amplifier operating line range.
Features
* 12-key keyboard for local programming of amplitude and frequency
* 4-digit display can be switched from the front panel to show what is being programmed (i.e., frequency and amplitude)
* Amplitude Programming Accuracy: ±0.2% of full scale from 45Hz to 2kHz from 5% of full scale; add ±0.02% per kHz above 2kHz
* Load Regulation: ±0.015% no load to full load at point of sense (output of associated power amplifier or at load)
* Line Requlation: ±0.01% for a 10% line change within the associated power amplifier operating line rangeBMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled & refurbished test instruments.
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific instruments & industrial
equipment. We ship with the utmost care!
***MPN 9010-3341
***OEM Elgar Corporation
***SKU*** 12566 -
Precision Motion Controls PWX-380 Indexer/Drive
$250.00Precision Motion Controls PWX-380 Indexer/Drive.
Drive Specifications:
Performance (unloaded motor)
Repeatability: �5 arc-seconds (unidirectional)
Accuracy: �5 arc-minutes (bidirectional)
Step-to-Step Accuracy:�20 arc-seconds (unidirectional)
Hysteresis: �3 arc-minutes
Inputs (optically isolated)
Trigger inputs: 5
Status Outputs: 3
Sequence Inputs: 3
Power 95 to 130 VAC, 50/60 Hz, 2A
Processor 80188 with 2K battery-backed RAM
Environmental � Operating
Drive: 0 to 60 �C measured at the heatsink
Motor: 110 �C measured at the motor case
Ambient: 10 to 40 �C, 0 to 95% humidity, non-cond
Environmental � Storage
Motor + Drive: -40 to +80 �C, 0 to 95% humidity, non-condensing
Indexer Range
Position: �32,000,000 steps (1,250 revolutions)
Velocity: 0.001 to 35.000 rev/sec
Acceleration: 0.01 to 99.99 rev/sec2Motor Specifications:
Static Torque (oz-in): 380
Rotor Inertia (oz-in): 10.24
Bearing Thrust Load (lb): 50
Bearing Radial Load (lb): 25
End Play for 1 lb Load (in): 0.005
Radial Play for 0.5 lb Load (in): 0.0008.BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Automation Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN PWX-380
***OEM Precision Motion Controls
***SKU*** 12563 -
ClearOne MAX EX 910-158-034 Rev. 4.0 Tabletop
$50.00The MAX EX conference phone provides premium, full-duplex audio with unmatched expansion capabilities. Integrating ClearOne’s industry-leading professional audio technology and advanced processing, MAX™ EX brings you unbelievable clarity, unique expandability — and incredible ease of use. MAX EX is the perfect solution for small conference rooms as a single unit, and also covers medium to large conference rooms as an expanded system. Link up to four phone units complete with microphones, loudspeakers and controls for an even distribution of sound. With MAX EX in meetings, not only can discussions flow more freely, so can productivity.
* Easy set up and operation — just plug the base station into a power outlet and analog telephone jack
* Automatic Level Control — automatically adjusts microphone volume levels based on how loudly participants in the local room are talking to improve voice quality for far-end participants
* Automatic Gain Control — automatically adjusts loudspeaker volume based on the incoming audio signal from the far end to provide clear, intelligible audio in the local roomSuggested Usage
It comes with a single unit conference phone that can be linked with as many as three additional MAX phones (MAX EX Expansion Kit) for use in larger conference roomsMAX EX
– Small conference rooms — up to 8 people
– Executive offices
– Home offices
***MPN 910-158-034 Rev. 4.0
***OEM ClearOne Communications, Inc.
***SKU*** 12548 -
Acopian Power Supply A20NT125
$90.00Narrow Profile Linear Regulated Power Supplies AC-DC single output.
Specifications:
Nominal Output Voltage = 20
Adjust +/-V = 0.5
Output Current Amps. at 40�C = 1.25
Output Current Amps. at 55�C = 1.25
Output Current Amps. at 71�C =1.25
Regulation Load +/- % = 0.005
Regulation Line +/- % 0.005
Ripple mV RMS = 0.25.***MPN A20NT125
***OEM Acopian
***SKU*** 12519 -
Matheson FM-1000 Flowmeter
$100.00Matheson describes the flowmeter as follows:
The FM-1000 Series Flowmeters incorporate the innovative design of the FM-1050 in a more compact unit without reducing standards of accuracy. This is the rotameter of choice for those interested in conserving space. The same �5% full scale accuracy is guaranteed for the 65mm scale length of these flowmeters.
The unit we have available is still sealed in the original packaging.
***MPN MJ14A171J608
***OEM Matheson
***SKU*** 12506 -
Zeiss MC 63A Photomicrographic
$36.00This Zeiss control panel is a slightly simplified version of the MC-63 electromagnetic shutter control panel. The MC63 camera system, developed for the Zeiss photomicrography photo ports, consisted of several modular building blocks. Central to the system was the housing with the electromagnetic shutter. The base of the housing clamped onto the photo tube of the microscope in which was installed a photographic projection ocular. The top of the unit carried the relay lens system and film back, usually a 35mm camera system or 4×5 large format back (special Polaroid backs were also available). Within the shutter body was a small beam splitter that diverted a small portion of the light to a photo-diode detector. This was connected (via the same cable as operated the shutter) to the control unit.
The exposure was timed automatically after programming the ASA or DIN information into the control panel. Course steps were set via the upper knob, and fine steps via the lower knob (-1, 0, +1). DIN settings between 6 and 37 were possible (ASA 3 to 4000). A simple release button actuated the shutter. There is also a �test� button that times the exposure without opening the shutter.
Green LED indicates power �ON� position. Yellow LED next to shutter glows when shutter is open, and red LED when the �test� button is selected (yellow LED will glow for duration of timed exposure, but without exposing film).
Control unit requires standard IEC type line cord (not included), and is currently set for 120v mains. 220v may also be selected, but fuse should be exchanged for proper protection. Condition of the control panel is excellent, but it has not been tested with a shutter unit at this time. As soon as we have one with which to test it, we will add that information to the listing!
***MPN 47 74 20
***OEM Zeiss
***SKU*** 12266 -
Leica PL APO 50x / 0.90 Microscope Objective
$950.00This is a Leica PL APO 50x / 0.90 Microscope Objective.
Yet another very recent objective well suited to semi-conductor examinations (as well as general metallography). This is a Leitz Germany Plan Apo 50x / 0.90 lens, catalog number 567 056. This objective does not appear to have been used, however there is a number �632� engraved on the nomenclature ring. Otherwise, there are no blemishes discernable either cosmetically or optically.
Plan Apochromat optics are corrected for a super-wide field of view index of 28 mm. The Apochromatic color correction is the highest obtainable. This is not an EPI version of the lens � in other words it does not include an annular condenser system concentric with the main objective for dark field illumination. It is strictly a bright field lens. It is not designated as strain-free which means it may not produce the best images when using interference contrast, but most objectives of very recent manufacture are very free of strain issues. The objective is spring-loaded for specimen and objective protection.
The lens is corrected for infinity tube length, and must be used on samples without a cover slip! The lens does have the standard RMS (20mm) mounting thread because it doesn�t have to accommodate the epi-illumination darkfield optics. In order to be used on the same nosepiece with the epi-objectives, an RMS to 32mm thread will be required. The objective will work with the Ergolux, Metalloplan, MM-6, and similar microscopes outfitted with an RMS type vertical illuminator. When fitted with the adapter, it is suitable for the relatively recent Leitz microscopes which include the Ergoplan and the DMR series reflected light instruments as well as the current DM 4000, 4500, and 6000 M microscopes.
**Shipping, Handling fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have over 32 years of experience of shipping sensitive scientific instruments & industrial equipment.
We ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 567 056
***OEM Leica
***SKU*** 12252 -
Bausch & Lomb SK Pillar Stand with ER-Arm (gray)
$325.00This is a very fine example of the most elaborate stereo microscope stand produced by Bausch & Lomb. The model number is SK, and it comes with an �ER� type focusing drive carrier for the various B&L stereo microscope pods. The ER arm is similar to the simpler type �E� arm, except that the pod may be rotated about the optical axis, greatly increasing the versatility of the stand. This stand is one of the older versions, since it is light gray in finish instead of black.
The base has a crank for elevation of the pillar, which is free to rotate. The crank may be locked in place with a sliding catch, and the rotation may be clamped with a large knurled knob. Horizontal extension of the arm is accomplished via a massive rack & pinion motion. The boom has a massive counterweight.
At the end of the boom is a vertical joint with approximately 160 degrees of motion that holds an extension arm about 5 inches in length. At the end of the extension is another adjustable knuckle that may also be rotated. The focusing yoke (�E� or �ER� arm) pin fits into the other end of this knuckle. When you add the two orientation motions of the ER type arm (angle and rotation), you end up with a total of eight degrees of motion independent of the focusing drive itself.
This base is quite heavy, and does require a fair amount of real estate, but in turn, it does allow one the greatest amount of latitude in positioning the microscope for best viewing position. The stand is in exceptional condition. All mechanical parts work perfectly, and cosmetically the stand itself is great.
***MPN 31-26-97 & 31-26-90 SK
***OEM Bausch & Lomb (B&L)
***SKU*** 12241 -
Bausch & Lomb Neutral Density Filter in Cell
$35.00This item is a neutral density filter in a small paddle carrier. It was manufactured by Bausch & Lomb, with a catalog number of 31 30 04. I am not sure of the strength of the neutral density filter (it isn�t marked) but it appears to be close to 25% transmission. I am also not sure with which instrument the filter was intended to be used.
There is a recessed cell that holds the filter itself, and the outside diameter of the �step� portion of the holder is about 36mm. The overall diameter of the circular lip is just a tad greater than 41mm. Overall thickness of the holder is ~4mm. Condition of the item is mint � no marks anywhere.
***MPN 31 30 04
***OEM Bausch & Lomb (B&L)
***SKU*** 12234 -
Wild (Leica) 20w Halogen Spot Illuminator
$180.00This item is the �business� portion of the Wild (now Leica) 6v 20w halogen incident light illuminator. It is missing several parts, including the heat filter and one of the filter retainer screws; a swing-out filter holder with a diffusing disk installed (clips to either of the chrome posts between the focusing lens and the housing); an the special articulating arm with central clamping knob. This later arrangement would have fastened to the base of the illuminator at the front end (the two tapped holes are visible in the first photo, bottom left). The socket and both collector lenses are present (both the fixed and focusable lenses), and the existing portion of the illuminator is in superb condition. The socket shows no evidence of use, and comes with a lamp installed. No transformer is included.
If the articulating arm system is required, we do have access to the assembly at an additional cost of $165.00. Part number for the lamphouse (which would have included the clamping assembly) is 445 155. The clamping assembly was sold separately as part number 399 211. Clamping assembly is new unused inventory. The clamping assembly could be fixed to several fixtures including a stand-alone baseplate, special bosses fixed to various Wild stereo microscope bases, or to special clamps attachable to the focusing column of the stand.
***MPN
***OEM Wild Heerbrugg
***SKU*** 12166 -
Leitz PL Fluotar 32x Microscope Objective
$430.00This is another spectacular condition Leitz metallurgical (or semi-conductor related) microscope objective. It is a Plan 32x, infinity corrected optic, and must be used only on uncovered specimens.
The lens has a relatively high numerical aperture of 0.75, and is highly corrected for flatness of field up to a 28 mm field-of-view index, as well as very high color correction. The Fluotars are bested only by the Apochromats. The lens mounting thread is standard RMS which makes this lens suitable for earlier instruments such as the Ergolux, Metalloplan, and others which used RMS nosepieces.
Nomenclature is on an engraved ring which may be rotated on the objective for optimal visibility when installed on a nosepiece. Leitz part number of the objective is 567 039. The lens is in superb condition – no marks of any sort on the glass, and the barrel is free of blemishes. I do not think this is a new objective (it was not in a storage capsule, and there are faint traces of residue in the knurling which would indicate it had been installed on an instrument), but the lens should certainly perform like a new one.
Location MB 28.14
Photo set 250BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN
***OEM Leitz
***SKU*** 3383
