Showing 42721–42740 of 51919 results
-
Cisco WS-C2950T-24 Catalyst Network Switch
$19.95Cisco WS-C2950T-24 Catalyst Network Switch.
***MPN WS-C2950T-24
***OEM Cisco Systems
***SKU*** 30471 -
AMX NI-4100 NetLinx Integrated Controller
$89.95AMX NI-4100 NetLinx Integrated Controller.
Module Cards Installed: Four SAA2022
No Power Supply
May not have rack mount, please inquire.
***MPN NI-4100
***OEM Amx
***SKU*** 30469 -
Ruland SPC-24-24-F 1.5 x 1.5in Rigid Coupling
$99.95Ruland SPC-24-24-F 1.5 x 1.5in Rigid Coupling
1-1/2″ x 1-1/2″ Rigid Coupling, Black Oxide Steel
Two-Piece Clamp Style With Keyway, 2 5/8″ OD, 3 7/8″ Length.
***MPN SPC-24-24-F
***OEM Ruland
***SKU*** 30468 -
Edmund 30579 Silvered Right Angle Prism
$45.00Edmund 30579 Silvered Right Angle Prism.
Size A6 – B8 – C6MM
***MPN 30579
***OEM Edmund Scientific
***SKU*** 30466 -
Iwaki MDH-422CV6-D Magnet Pump
$195.00Iwaki MDH-422CV6-D Magnet Pump.
Head (FT): 79
GPM: 5
2.0HPMotor:
Baldor VM3555T 2hp.
208-230/460V
5.7-5.4/2.7A
3450rpm
***MPN MDH-422CV6-D
***OEM Iwaki
***SKU*** 30464 -
Madell STP-350 High Precision Manual Stencil Printer
$400.00Madell STP-350 High Precision Manual Stencil Printer.
Parts missing, As Is, As Shown
***MPN STP-350
***OEM Madell Technology
***SKU*** 14168 -
National Instruments PCI-6221 192970B-01L Data Acquisition Card
$150.00National Instruments PCI-6221 192970B-01L Data Acquisition Card.
***MPN PCI-6221 192970B-01L
***OEM National Instruments (NI)
***SKU*** 30462 -
National Instruments PCI-6221 191329D-03L Data Acquisition Card
$150.00National Instruments PCI-6221 191329D-03L Data Acquisition Card.
***MPN PCI-6221 191329D-03L
***OEM National Instruments (NI)
***SKU*** 13393 -
PMC Model BPA-60D Regulated Power Supply
$50.00PMC Model BPA-60D Regulated Power Supply.
0-60V 0-1.5a
***MPN BPA-60D
***OEM Power Mate Corp
***SKU*** 30460 -
60mm Nanomotion LS4 Linear Stage with Renishaw Encoder
Original price was: $1,200.00.$950.00Current price is: $950.00.Custom 60mm Nanomotion LS4 Linear Stage with Renishaw Encoder
Wires Cut
-40mm W 95mm L 20mm H
-60mm Travel
-Crossed Roller Bearings
-Nanomotion Custom SCNR-BTY-1 Mounting Plate
-Renishaw RGH24 Y15A30A Encoder
-Nanomotion LS4-1-S-0.6 Piezo Servo Motor15 x 15mm Pattern + 70mm on Center M3 Tapped Holes.
Taken from working prototype system.
***MPN SCNR-BTY-1 LS4-1-S-0.6
***OEM Nanomotion
***SKU*** 13006 -
50mm Custom Nanomotion LS4 Linear Stage with Renishaw Encoder
$950.00Custom Nanomotion LS4 Motorized Linear Stage with Renishaw Encoder.
-40mm W 80mm L 20mm H
-50mm Travel
-Crossed Roller Bearings
-Nanomotion Custom SCNR-BTZ-1 Mounting Plate
-Renishaw RGH24 Y15A00A Encoder
-Nanomotion LS4-1-S-0.6 Piezo Servo Motor.15 x 15mm Pattern + 60mm on Center M3 Tapped Holes
Taken from working prototype system.
Cables are cut.We apologize that a photo of this unit was not taken at the time of listing. Please give us a call to request photos and additional information.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Optical Stages for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN LS4 SCNR-BTZ-1
***OEM Nanomotion
***SKU*** 46701 -
Omega CN3390 Temperature Process Controller
$359.95Omega CN3390 Temperature Process Controller.
Model: CN3390-R-R-R-R-R
***MPN CN3390-R-R-R-R-R
***OEM Omega Engineering
***SKU*** 12417 -
TTC ISU 6000 Interface Switching Unit
$65.00TTC ISU 6000 Interface Switching Unit.
With Cable Interface Adaptor
***MPN ISU 6000 ISU6000
***OEM TTC
***SKU*** 12201 -
APS APS52ES-150340-7 51 Watt Desktop Switching Power Supply
$14.95APS APS52ES-150340-7 51 Watt Desktop Switching Power Supply.
***MPN APS52ES-150340-7
***OEM Advanced Power Solutions Inc
***SKU*** 30457 -
BNC 8″ UHF 1/4 Wavelength Antenna
$10.00BNC 8″ UHF 1/4 Wavelength Antenna.
***MPN
***OEM Brand Unmarked
***SKU*** 30456 -
UDT Model 1000 Autocollimator with Collimation Objective Tube
$1,000.00UDT Model 1000 Autocollimator with Collimation Objective Tube,
This is a modular autocollimator assembly manufactured by United Detector Technology (UTD). It probably dates from the early 1980’s or late 1970’s. The model 1000 autocollimator head had two different focal length lenses available, as well as several types of detectors. There is a BNC cable coming from the collimation head, but there is no beam-splitting prism present. We are not sure if a detector is within the head, or if there was some sort of light source. If it were a detector we believe there would have been some sort of quadrature sensor, in which case one would need significantly more data lines than a simple coaxial connection. The end of the autocollimator tube is an open sleeve of 1 inch diameter.Probably the more important element of this offering is the collimation objective tube. The outer diameter of the sleeve is 3.5 inches, and a flat has been milled on the bottom of the housing with 1/4-20 screw threads in three places. The focal length of the objective is 400mm, and the diameter is just shy of 2.75 inches. This is the larger of the two interchangeable objectives – the other had a focal length of 200mm.
There is a tiny chip out of the periphery of the lens that has been covered with an opaque epoxy, but the rest of the lens appears to be in perfect condition. (See last photo). It probably cuts down the effective aperture by less than 1/4 mm.
Photo set 1327.
BMI Surplus, Inc. has a huge inventory of new, pre-owned, recycled Geodesey & Metrology Equipment For Sale.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have over 30 years of experience of shipping sensitive scientific instruments & industrial equipment. We ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 1000 + 1358
***OEM UDT
***SKU*** 20214 -
Film Plane Alignment Fixture 70mm Format with Microscope
$150.00Film Plane Alignment Fixture 70mm Format with Microscope
This item appears to be some sort of film-plane calibration fixture. It consists of two assemblies. The larger assembly, marked 70MM-5C-26 has slotted sides on the base plate and a ground glass window 30mm by 70mm. The ground glass has a crossline with centering circle scribed upon it. There is a 45 degree mirror and another vertical glass plate to protect the mirror. When the instrument is fully assembled, it looks like there is a massive right-angle prism with a ground glass surface.
In front of the clear window is a sleeve mounting that accepts a right-angle viewing microscope. The microscope can be focused upon the ground-glass surface with the crossline, however the circle is not perfectly centered in the field of view.
There is no manufacturer’s mark on the fixture, and I was not able to find anything that referenced the part number. There is a small paper label fixed to the back of the reflector housing that is marked in red ‘TRAP 6″ and the numbers ‘130-020 A’.
BMI Surplus, Inc. is your #1 resource for new, pre-owned &
refurbished optical equipment, optical tables, laser tables,
vibration isolation systems, legs and bases. We will work with
you individually to find the perfect set up, for your
application.
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific & industrial equipment.
We ship with the utmost care!!
***MPN 70MM-5C-26
***OEM Custom
***SKU*** 20213 -
Kyowa WF 10x Cross Line Eyepiece, for TES
$140.00This is a special ocular manufactured by Kyowa for use with their TES-2 measuring microscope. It includes a focusable eyelens and a very precisely centered crossline. The crossline is perfectly centered to the sleeve of the ocular.
The sleeve is a standard 23.2mm diameter, and the magnification is 10x. I am not sure what the actual field-of-view index is, but the ocular is marked WF for wide field.
Lenses are coated, and the glass is well-corrected (the entire crossline is perfectly imaged by the eyelens). The ocular appears to have had very little use.
Photo set 1313
***MPN WF 10x +
***OEM Kyowa
***SKU*** 20200 -
RCA 7850 Electron Tube Photomultiplier
$28.00RCA 7850 Electron Tube Photomultiplier..
BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!!
***MPN 7850
***OEM RCA
***SKU*** 20194 -
