HP 8970A Noise Figure Meter
This is a HP 8970A Noise Figure Meter.
This unit powers on, with a quiet fan.
Basic test O.K. with noise generator and signal generator.
3 units available, physical condtion a bit different on each unit. Call for precise details.
Frequency Range: 10 MHz to 1600 MHz; Noise Figure Measurement Range: 0 to 30 dB
NF Instrumentation Uncertainty: +0.1 dB.
Gain Measurement Range: -20 to+40 dB
Gain Instrumentation Uncertainty: +0.15 dB
Input SWR reference impedence: <1.7 10 MHz to 1600 MHz
Requires 346A/B/C noise source
This unit may require new batteries
No Power Cord
This unit powers on, with a quiet fan.
Basic test O.K. with noise generator and signal generator.
The power button is not the original and it has no feet or rack mount hardware.
Initial inspection of this unit indicates this item will be functional.
Does not include calibration.
Buyer will need to source their own calibration.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Test Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 8970A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 14098
Leitz Mask Holder for 4×4 Microscope Stage
This item is a Leitz Mask Holder it attaches to the side of the Marzhauser 4.25 x 4.25 inch travel stage as supplied with several of the Leitz semi-conductor inspection microscopes. The holder features and adjustable stop so masks up to 4×4 can be accommodated (minimum size is 25 mm square) The stage also has a pivot point concentric with the attachment screw. This pivot allows the geometry of the mask to be set perfectly parallel with the XY motions of the stage. Theta rotation is regulated by a small set screw on the side of the holder which bears against the side of the stage. On the opposite side of the pivot point is a spring-loaded plunger so the established theta angle is held. Adjustment is possible through an angle of approximately three degrees.
This holder is in superb condition. It will probably work with most of the similar stages Marzhauser supplied to other manufactures as well. Marzhauser designation for the stage this fits is EK 100×100, sometimes referred to as an EK-8 stage. I know Marzhauser supplied stages to Zeiss and Nikon, possibly others. All that is required to use the holder is a single tapped hole midway along the side of the upper stage plate. It would be easy to adapt this holder to many stages in which the entire upper plate moves in both X and Y (sometimes called a triple-plate or three-level stage).
***MPN
***OEM Leitz
***SKU*** 2368
Sellstrom/RTC SM/RTC-8260 36″ x 5/16″ Galvanized Steel Cable Eye and Eye Sling
This Sellstrom/RTC SM/RTC-8260 36″ x 5/16″ Galvanized Steel Cable Eye and Eye Sling has the following technical specifications:
Convenient inspection date grid on label
Chemical resistant polyester webbing
Maximum arresting forces, 900 lbs.
Double locking snaphooks proof tested to 3600 lbs.
This is an unused product in New/Like New Condition.
***MPN SM/RTC-8260
***OEM Sellstrom / RTC
***SKU*** WP1038
Coherent CR-599 Dye Laser and 599-21 Controller
This is a used Coherent CR-599 dye laser and 599-21 dye laser controller. Cannot be tested here. This is being offered as Parts/Repair. No manuals or other documents are with it. it is available for inspection at our warehouse by appointment.
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN CR-599-21, CR-599
***OEM Coherent
***SKU*** 15044
23.5 inch Diameter Glass Blank, 1 1/16 inch Thick
This 23.5″ diameter glass blank had the following information written on a sheet of paper attached to it:This glass weights 48 lbs and is approximately 1 1/16″. Please note that all measurements are approximate. Available for inspection by appointment. Call or click the “ask a product question box” above for a shipping quote.
***MPN
***OEM
***SKU*** 12600
