Daedel 4-inch Translation Stage with Slo-Syn Motor
$350.00
This is a Daedal motorized 4 inch translation stage. There is a label on the stage that says Model 44044, but that number did not show up in any of the Daedel catalogs we have on hand except in reference to a hydraulic pump. It is very similar to the model 4955-04 we have on offer (a manual positioning stage with a mechanical digital readout), however this stage does not have a standard leadscrew. The leadscrew has a 0.4mm pitch � 2.5 revolutions advance the stage only one mm.
The motor is a Slo-Syn stepping motor, type M062-FD-421, with a resolution of 200 steps per mm, or combined with the leadscrew, a step resolution of 2 microns. The motor is dated 1986. There is a Jones plug connector on the drive motor cable but I am unsure of the pinouts. The motor axis does have a manual positioning knob. The motor and handle add an additional length of 110mm beyond the stage bracket.
Translation Table = 6×6 inches
Overall Stage Length (less drive housing) = 6 inches
Overall Stage Width = 6 inches
Table Height = 2 inches
Drive Housing Height = 2.35 inches
Drive Housing Length = 2.75 inches
Motor (and handle) Length = 4.375 inches
Entire Stage Length = 13.125 inches
Straightness = 0.00008 in/inch of travel
Load Capacity = 100 pounds
Stage Weight = 6.5 pounds
The stage is in superb condition, but not new.
***MPN 44044
***OEM Daedal
***SKU*** DP213
1 in stock
Description
Description
This is a Daedal motorized 4 inch translation stage. There is a label on the stage that says Model 44044, but that number did not show up in any of the Daedel catalogs we have on hand except in reference to a hydraulic pump. It is very similar to the model 4955-04 we have on offer (a manual positioning stage with a mechanical digital readout), however this stage does not have a standard leadscrew. The leadscrew has a 0.4mm pitch � 2.5 revolutions advance the stage only one mm.
The motor is a Slo-Syn stepping motor, type M062-FD-421, with a resolution of 200 steps per mm, or combined with the leadscrew, a step resolution of 2 microns. The motor is dated 1986. There is a Jones plug connector on the drive motor cable but I am unsure of the pinouts. The motor axis does have a manual positioning knob. The motor and handle add an additional length of 110mm beyond the stage bracket.
Translation Table = 6×6 inches
Overall Stage Length (less drive housing) = 6 inches
Overall Stage Width = 6 inches
Table Height = 2 inches
Drive Housing Height = 2.35 inches
Drive Housing Length = 2.75 inches
Motor (and handle) Length = 4.375 inches
Entire Stage Length = 13.125 inches
Straightness = 0.00008 in/inch of travel
Load Capacity = 100 pounds
Stage Weight = 6.5 pounds
The stage is in superb condition, but not new.
***MPN 44044
***OEM Daedal
***SKU*** DP213
Additional information
Additional information
Weight | 9 lbs |
---|---|
Dimensions | 16 × 9 × 5 in |