Showing all 14 resultsSorted by latest
-
Agilent signal generator
Original price was: $7,000.00.$6,899.99Current price is: $6,899.99. -
-
-
Agilent N1996A CSA Spectrum Analyzer 100Khz-3Ghz for PARTS/REPAIR
Original price was: $1,100.00.$1,000.00Current price is: $1,000.00.Agilent N1996A CSA Spectrum Analyzer 100Khz-3Ghz for PARTS/REPAIR. Unit powers on with test power supply but shows nothing on lit display. Rack mount hardware. No desk feet. No manuals, software, cables or other accessories – as shown.
-
HP Agilent 83732B Synthesized Signal Generator for PARTS/REPAIR
$5,000.00HP Agilent 83732B Synthesized Signal Generator. Unit powers on. completes
self-test sequence. Display bright. Fan quiet and clean. PARTS/REPAIR –
Output is intermittent and possibly associated with attenuator stepping.
Last Agilent factory service tamper seals are present and intact.
No further testing performed. -
Agilent 6 1/2 Digit Multimeter 34401A
$390.00Agilent 6 1/2 Digit Multimeter 34401A
Agilent Technologies 34401A is a 6 1/2 digit, High-performance digital multimeter. Its combination of bench top and system features makes this multimeter a versatile solution for your measurement needs now and in the future.
-
Agilent Series 1200 G1367C High Performance Autosampler
$4,000.00Agilent Series 1200 G1367C High Performance Autosampler
Automated Gas sampler157250
The autosamplers employ a vial/plate pusher mechanism to hold down the vial
or the plate while the needle is drawn back from the sample vessel.The standard metering device (for the G1367B) provides injection volumes
from 0.1–100 μl. -
Agilent E4413A Power Sensor, 50 MHz to 26.5 GHz, 100 pW to 100 mW, -70 dBm to +20 dBm
$1,600.00Agilent E4413A Power Sensor, 50 MHz to 26.5 GHz, 100 pW to 100 mW, -70 dBm to +20 dBm
The E 4413A diode power sensor, with wide dynamic range, is designed for use with the EPM and EPM-P series power meters for power measurements on CW signals from 50MHz to 26.6 GHz.
Features:
- Frequency Range: 50 MHz to 26.5 GHz
- Measurement range: 100 pW to 100 mW ( -70 dBm to +20 dBm)
- 50 ohm input impedance
- 3.5 mm (m) connector
- Calibration factors stored in EEPROM
- Compatible with the EPM and EPM-P series power meters
- Shipping Weight: 2 lb
-
Agilent 34970A Data Aquisition/Switch Unit
$650.00Agilent 34970A Data Logger
Excellent Condition; Powers on Display Dim but Useable
Basic Check with 34901A Card OK; No Cards or Accessories with Unit
Check BMI Stock for More Items
***74128*** -
Agilent 8565EC 9kHz-50GHz Spectrum Analyzer
Original price was: $11,000.00.$9,799.99Current price is: $9,799.99.Agilent 8565EC 9kHz-50GHz Spectrum Analyzer
Good Condition
Check BMI Stock for More Items
***69268***The machine runs very quietly
***69268***
-
Agilent CSA Spectrum Analyzer N1996A 100 KHz- 3 Ghz
Original price was: $2,150.00.$2,000.00Current price is: $2,000.00.This is a Agilent CSA Spectrum Analyzer N1996A 100 KHz- 3 Ghz. Unit powers on and completes all self test diagnostics. Cooling fan quiet. Tested with RF signal generator at various frequencies and input levels O.K. File storage and retrieval verified with USB port and thumbdrive. No power supply, manuals, software, cables or other accessories.
