Showing 181–200 of 202 results
-
XY-axis Motorized Stage with Vexta SPP51061 and
$500.00XY-axis Motorized Stage with Vexta SPP51061 and RP/BH35404 Motors.
The mounting plate is 2.75 inches by 1.25 inches. Axis X moves 16.75 inches and axis Y moves 9.5 inches.
This unit came from a working environment but has not been tested. Please call for more information.***MPN
***OEM
***SKU*** JS0506 -
Danaher Precision Systems Motorized Stage
$700.00Mounting plate is 6 inches x 4 inches and moves 3.94 inches.
***MPN 42252
***OEM Danaher Precision Systems
***SKU*** JS0505 -
Danaher Precision Systems Motorized X-Y
$900.00Mounting plate measures 6 inches by 4 inches and both axis move 3.25 inches.
***MPN 38214 / 38216
***OEM Danaher Precision Systems
***SKU*** JS0504 -
Motorized Stage X-axis with Superior Electric
$650.00This model has a 10 inch by 10 inch mounting plate. The motor is 2.6 volts and 3.1 amps.
***MPN M062-LE06E
***OEM Superior Electric company
***SKU*** JS0502 -
Precision Pacific Labs Motorized Stage Base
$1,000.00The stage base is a 10 inch by 8 inch plate. This linear stage is very similar to Precision Pacific model P6 04. There are no manufacturer markings to indicate the model of this particular stage.
***MPN LE57-51
***OEM Precision Pacific Laboratories (PPL)
***SKU*** JS0501 -
Design Components DC-46 X axis Motorized Stage
$560.00The mounting plate for this model is 7 inches by 7 inches. It travels up to 3 inches. The motor is 2.6 volts and 3.1 amps.
***MPN DC-46 / M062-LE06E
***OEM Design Components
***SKU*** JS0500 -
Design Components DC-44A Motorized X-axis
$575.00The mounting plate of this stage is 7 inches by 7 inches.
***MPN DC-44A / MC-001
***OEM Design Components
***SKU*** JS0499 -
Design Components LP-45 Motorized Linear Stage
$400.00The plate is 3.5″ x 7.25″ It moves approx 1″ on the X axis.
***MPN LP-45 / MT-3115-014E
***OEM Design Components
***SKU*** JS0496 -
Danaher Precision System Motorized Stage
$300.00Danaher Precision System Motorized Stage
***MPN***OEM Danaher Precision Systems
***SKU*** JS0491 -
Danaher Precision System Theta Z-axis Motorized
$3,000.00This unit has a Vexta Stepping Motor PH268M-E1.5B (DC 5.4 V / 1.5 A). The motor has a clean damper D6CL-6.3 OYS. The plate is 8 inches in diameter and the platform is 4 inches high. It can be raised about 3/4 inches. The base is 8 inches by 8 inches and the motor sticks out 5.5 inches.
***MPN
***OEM Danaher Precision Systems
***SKU*** JS0458 -
DCI Translation Stage DC-66R with Motor DCI
$790.00DCI Translation Stage DC-66R with Motor DCI 1024-02 . This is is in exceptional physical condition.
***MPN DC-66R
***OEM Design Components
***SKU*** JS0146 -
Industrial Devices Corporation Translation
$350.00Motor sourced separately
***MPN PT-LAU003
***OEM Industrial Devices Corporation
***SKU*** JS0145 -
Kensington 8500-10 Linear Stage
$2,200.00Kensington 8500-10 Linear Stage
The motor is untested but in good cosmetic condition
The stage is in exceptional cosmetic condition with very smooth movement.
***MPN 8500-10 / MT2115-014DF
***OEM Kensington
***SKU*** JB0112 -
Newport / Klinger Motorized Translation
$360.00Klinger (Newport / Micro Controle) motorized linear translation stage with way covers, UT100-50-0.1um. Stage part number with motor is 354 455.
Specifications include:
105x180mm base
32mm table height (table is 0.5mm proud of enclosure frame)
Table is 76mm wide, 78mm long
Motor mount adds 139mm to length
Nominal vertical load capacity 20 kgFTop surface of table has 63mm square M4 bolt pattern that is compatible with module 80 systems. Stage enclosure may be mounted to other surfaces either by captive M4 screws, M4 threads, or via bridles using slots milled into either side of the enclosure. Base of enclosure has two square face-centered bolt patterns, a 63mm M4 for module 80 systems, and a 92mm M5 for module 120 systems.
The motor has been severely damaged and may not be repairable, however the stage itself is in very fine condition. You will most likely either need to replace the motor or to install a manual positioning actuator. Please see photos.
Location MB 109
Photo set 802
***MPN UT100-50
***OEM Klinger Scientific
***SKU*** DP370 -
Daedel 4-inch Translation Stage with Motor bracket
$216.00Model 106041 P-10E Daedal stage, no motor, but with motor bracket. It contains the standard leadscrew. The motor bracket does not include a flex coupler, but this can be supplied in stainless steel for an additional fee.
Translation Table: 6×6 inches
Overall Stage Length (less drive housing): 6 inches
Overall Stage Width: 6 inches
Table Height: 2 inches
Drive Housing Height: 2.35 inches
Drive Housing length: 2.75 inches
Straightness: 0.00008 in/inch of travel
Load Capacity: 100 pounds
Stage Weight: 4 poundsThe stage is in excellent condition. There is a very slight amount of fading in the anodizing on the table surface, but the motor bracket has significant fading, and a bad scuff mark on the top of the motor mount
***MPN 106041 P-10E
***OEM Daedal
***SKU*** DP212 -
Klinger Motorized Rotary Stage, RT 120 PP,
$475.00This item is a Klinger motorized Rotary Stage, type RT 120 PP. It includes a type UE31 PP DC step motor drive along with a rotary encoder. Step resolution is 0.001 degree. The stage is very massive (approximately 7.25 pounds). Condition is excellent, however there is a small ding on one edge of the graduated ring.
The stage metrics include:.
Diameter of graduated rotary portion = 120mm
Through-bore clearance = 60mm
Overall height (from mounting shelf, side mounted) = 140mm
Stage thickness = 64mm
Length of motor with encoder = 98mm
Width of stage, less motor = 138mm
Load bearing = 25 kg***MPN RT 120 PP
***OEM Klinger Scientific
***SKU*** DP179 -
NEAT New England Affiliated Technology
$1,570.00The XY stages are motorized and measure 19 x 19″. The Z stage is manual and measures 4″ x 2.5″ with 2″ travel
The interior of the bridge measures 21.5″ x 23″.
.
***MPN
***OEM New England Affiliated Technologies, inc.
***SKU*** 12282 -
Newport 421 Linear Stage 860 Motorized Actuator
$310.00Unit is a Newport 421 Linear Stage 860 Motorized Actuator
Specifications:
-1″ Travel
-3″ x 3″ Stage
***MPN 421 / 860
***OEM Newport Research Corp (NRC)
***SKU*** 3570 -
Photon Control 6 Axis XYZ Micro Manipulator
$1,400.006 Axis XYZ, Super High Precision, with additional Theta, Yaw and Rotation Axis.
***MPN XYZ
***OEM Photon Control
***SKU*** 2499 -
Daedal 43024 Linear Motorized Stage 5″ x 5″
$275.00This is a Daedal 43024 Linear Motorized Stage 5 x 5.
The stage moves smoothly. The motor is untested.
***MPN 43024
***OEM Daedal
***SKU*** 2446
