Showing 181–200 of 907 results
-
HL 50x / 0.65 BF / DF Metallurgical Microscope
$100.00This Leitz objective is meant for use with the Modulopak vertical illuminators as found on Leitz microscopes of the 1980�s such as the Ergolux, as well as earlier stands equipped with the dark field vertical illuminator that could be interposed between the limb of the stand and the viewing tube. Even though these objectives are fitted with a standard RMS thread, they are able to take advantage of darkfield capability using a very novel means for illumination. The vertical illuminators (such as the modulopak) are fitted with an annular collector lens in the lower dovetail mount. The darkfield illumination, when selected, passes through this lens which focuses it to a point somewhere between the objective and the bottom of the illuminator. After passing this focal point, the hollow cone of light then expands whereupon it enters the periphery of the objective. Annular collector lenses in the objective then direct the light to a mirror element at the end of the lens which focuses the light onto the sample. The flared body of the objective allows the lenses to be threaded into fairly compact RMS nosepieces.
This particular objective is engraved HL 50x / 0.65 DF. It is an infinity corrected objective, and must be used without any coverslip. The HL designation indicates the lens is corrected for flatness of field when using standard diameter 23.2mm oculars with a field-of-view index of 18mm or less, and is of normal achromatic color correction. The objective is not spring-loaded so it must be used with care. Working distance is less than 0.5mm, but otherwise unknown.
Magnification � 50x
Numerical aperture � 0.65
Achromatic color correction
Nominally flat field-of-view for normal 18mm index oculars
Standard RMS thread
Dark field capable � must be used with Modulopak vertical illuminators for dark field
Infinity corrected
Cover glass correction � MUST be used without cover-glassLeitz catalog number for this objective is 569 190. Cosmetically, the objective is in very fine condition, near mint. However, there is a small scratch on the front element (see third photo). The scratch is not imaged in the field-of-view, however, it may very slightly reduce contrast when looking at some specimens.
***MPN 569 190
***OEM Leitz
***SKU*** 30136 -
Plan 16x / 0.30 Metallurgical Microscope
$275.00This objective is intended for the examination of uncovered polished specimens in reflected light. It is a flat-field optic, corrected for the 28mm super-wide field-of-view index as found in the Orthoplan / Metalloplan series and the MM5 / MM6 metallographs.
This lens is only intended for work in bright-field illumination, and for non-critical work in polarized light. It has a 45mm adjustment length (objective thread seat to specimen distance). The threads are standard RMS.
Magnification � 16x
Numerical aperture � 0.30
Thread � RMS
Plan correction to 28mm
Working distance � 7mmThe objective is in flawless optical condition and very excellent cosmetic condition.
Photo set 1927
***MPN 569 184
***OEM Leitz
***SKU*** 30132 -
Ke 10x Ocular Pair (Focusing, one with
$75.00This is a pair of focusing 10x oculars for Unitron microscopes. While not marked ‘micrometer’, these eyepieces are identical in all respects to the Ke10x ‘Micrometer’ oculars. One of the eyepieces has a micrometer disk installed (numbered 0 to 10, divided into 100 parts), the other includes an empty micrometer holder with retainer ring.
The oculars are in excellent condition � both the chrome and the black lacquer of the eyelens bezels are in great condition. The glass appears to be perfect, although uncoated. These probably date from the 1960’s.
***MPN
***OEM Unitron
***SKU*** 30096 -
W 8x Microscope Ocular Pair, Exc
$78.00This is an excellent condition pair of 8x microscope oculars from the Japanese manufacturer Unitron. They are engraved ‘W 8x’ and feature a wide field of view with a relatively high eyepoint. They fit the normal 23.2mm diameter eyepiece tubes. The upper eyelenses are fixed and these are not designed to accept micrometer reticles. It should be noted that Unitron microscope oculars are not suitable for use with their telescopes.
The eyepieces are in excellent condition � there is very little wear to the black lacquer of the front bezels. One of the oculars has some abrasions to the chrome tube (see photo). The glass is in perfect condition and has MgFl coatings.
Photo set 1890
***MPN
***OEM Unitron
***SKU*** 30095 -
Unitron Microscope Eyepieces Lot of 6
$120.00Unitron Microscope Eyepieces Lot of 6.
This is an interesting assortment of vintage Unitron microscope oculars. There are six oculars in total, including two paired and two single magnification lenses. Both of the paired oculars have focusing eyelenses, while the two ‘singles’ have fixed upper elements.
The oculars include:
Paired R 5x lenses, marked ‘Bi’. While these do have focusing eyelenses, they do not appear to accept reticles. They are very long (see photo).
Paired Ke 10x ‘Micrometer’ eyepieces with focusing eyelenses. Both oculars include a carrier for reticles, and there is a micrometer plate numbered ‘0’ to ’10’ and divided into 100 parts installed in one of the carriers. The other carrier is empty.
Ke 15x single ocular, also marked ‘Bi’.
K 20x single ocular, also marked ‘Bi’.
All of the eyepieces are of the standard 23.2mm diameter. None are high-eyepoint, nor do they have coated lens elements. The glass is excellent in all of the eyepieces. The chrome is in very decent shape in all except the 20x, which shows some brassing. The black paint on the bezels shows wear on all of the lenses, although not significant. The Ke 15x has obviously been dropped � the lip of the front bezel is turned down in a couple of places (see fourth photo). These optics probably date from the early 1960’s.
Photo set 1889
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned, recycled and refurbished Microscope Parts for sale.
We will work with you individually to find the perfect set up for your application…Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Unitron
***SKU*** 30094 -
Microscope Stage, 4.25 x 4.25 on Carrier for Leitz
$225.00This is a Semprex large-travel microscope stage that has been adapted to a stage carrier for a Leitz Orthoplan (or Ortholux 2) microscope. The stage features an excursion range of 4.25 inches in both the X and Y directions (ungraduated). The entire top plate moves so the sample does not ride back and forth on the upper plate. The stage has a glass insert so it may be used with transmitted light applications throughout the range of motion. The glass plate is about 2.5mm thick, so the substage condenser should have at least a 4mm working distance upper element (the L4 type 005 element as used with the type 600 condenser base). The stage carrier has a dovetail to accept a condenser carrier, but neither the condenser carrier or condenser are included.
The Semprex stage features a very innovative drive system. There are no rack & pinion assemblies. Instead, each axis is supplied with a tapered blade. The drive knobs have a pair of compression washers that engage the edge of the blade. The drives are completely free of backlash and there is absolutely no lost motion in the knobs. It is a very elegant system.
The stage appears virtually unused. The upper surface is unblemished. The glass is completely unmarked
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN
***OEM Semprex Corp
***SKU*** 30108 -
Epiplan 40 / 0.60 Pol Short-Mount Microscope
$225.00This is a very nice Zeiss LD Epiplan 40 POL objective for work in reflected polarized light. Because it is strainfree, it is suitable for use with the Nomarski interference contrast method (requires the addition of an INKO LD 40 attachment, not included). The objective has a numerical aperture of 0.60. By selection of suitable cover shrouds, the coverglass correction of the objective can be altered from D=0 (no coverglass) to D=1.5 mm. The shroud included with this objective has no glass element, therefore the objective is presently corrected for imaging through a 1.5mm thickness of glass. This would be suitable for looking at semi-conductor mask geometries with the substrate side toward the objective.
Working distance with D=1.5 shroud installed is 3.4 mm. The objective has an adjustment length of 22 mm. This series is intended to be used with some sort of extension collar. When threaded into the centerable change rings, they are suitable for use with the type IIC vertical illuminator (corrected for an adjustment length of 33 mm). When used on a 45mm type turret nosepiece, they should be installed with an 23 mm spacer ring in order to increase their adjustment length to 45mm. Similarly, if they are used on a reflected light turret corrected for 33 mm, an 11 mm spacer should be introduced.
The objective is in superb cosmetic condition � the nomenclature is very strong without any wear. The front element does have two very fine hairline scratches in the coating (see last photo), but they are very insignificant and should not adversely affect performance. However, the price has been adjusted accordingly.
Photo set 1887
BMI Surplus, Inc. is your best resource for new, pre-owned,
recycled & refurbished microscopes and microscope components.
We will work with you individually to find the perfect
microscope for your application.Buy online or give us a call with any questions at 781-871-8868.
We’re here ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific instruments & industrial
equipment. We ship with the utmost care!
***MPN 46 21 24-9901
***OEM Zeiss
***SKU*** 30092 -
PL Fluotar 32x / 0.75 Metallurgical Microscope
$1,100.00This is a spectacular condition Leitz (engraved ‘LEICA GERMANY’) semi-conductor microscope objective. It is a Plan 32x, infinity corrected optic, and must be used only on uncovered specimens. The objective is spring-loaded for protection of the front lens.
The lens has a relatively high numerical aperture of 0.75, and is highly corrected for flatness of field up to a 28mm field-of-view index, as well as very high color correction. The Fluotars are bested only by the Apochromats. The lens mounting thread is standard RMS which makes this lens suitable for earlier instruments such as the Ergolux, Metalloplan, and others which used RMS nosepieces. It may be used on more recent 32mm thread instruments via a type 562 281 adapter ring (not included).
Nomenclature is on an engraved ring which may be rotated on the objective for optimal visibility when installed on a nosepiece. Leitz part number of the objective is 567 052. It was specifically manufactured for KLA inspection stations, and there is a KLA serial number engraved on the side of the objective (596).
The lens is in superb condition – no marks of any sort on the glass, and the barrel is free of blemishes. This listed at close to $4500 in the 1996 Leica Master Price List.
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN 567 052
***OEM Leica
***SKU*** 30091 -
W 10x 18MM Ocular Pair for Stereo
$70.00This is a nice matched pair of 10x oculars from a Swift model Eight-Eighty stereo microscope. They are engraved ‘W 10x � 18MM’ The glass is in perfect condition and the barrels have not been abused. The black anodized upper portions of the oculars do exhibit a bit of fading, and there are a couple of very light scratches in the anodized finish (see photo). Diameter is 23.2mm � these are not the wider type of ocular with the 30mm barrel.
***MPN
***OEM Swift
***SKU*** 30086 -
Achromat 4 / 0.10 Microscope Objective
$36.00This fairly early achromat objective is engraved ‘Zeiss Winkel’ which would indicate a manufacture date shortly after the end of WW2. It is very good condition with a bit of wear to the crowns of the black lacquer on the attachment knurling. The magnification color band (red) is very strong and uniform � unusual for this vintage lens. The glass is in excellent condition.
Magnification � 4x
Numerical Aperture � 0.10
Achromatic correction
160mm tube length
Adjustment length � 45mm?Photo set 1878
***MPN
***OEM Zeiss
***SKU*** 30083 -
Epiplan 10 / 0.2 Objective for Comparison
$100.00This is a specialized objective that is intended for the small Zeiss semiconductor comparison microscope. The objective thread is much smaller than the normal RMS thread (13.5mm diameter with a 0.35mm thread pitch). This objective also has an extension tube that is 34mm long. There are no optics in the extension tube.
The objective is engraved with an infinity symbol, slash, 1.5. This would indicate it was intended to look at pattern geometry on semiconductor masks, with the substrate facing the objective (1.5mm thick glass).
Magnification � 10x
Numerical aperture � 0.20
Corrected for flat field imaging
Special attachment thread
Tube length – Infinity
Unknown adjustment lengthThe objective is in very good condition. There is a very small chip at the edge of the front lens concavity (please see second photo).
Photo set 1877
***MPN 46 20 92
***OEM Zeiss
***SKU*** 30082 -
Epiplan 10 / 0.2 Objective for Comparison
$125.00This is a specialized objective that is intended for the small Zeiss semiconductor comparison microscope. The objective thread is much smaller than the normal RMS thread (13.5mm diameter with a 0.35mm thread pitch). There is no extension tube provided with this objective.
The objective is engraved with an infinity symbol, slash, 1.5. This would indicate it was intended for looking at pattern geometry on semiconductor masks, with the substrate facing the objective (1.5mm thick glass).
Magnification � 10x
Numerical aperture � 0.20
Corrected for flat field imaging
Special attachment thread
Tube length � infinity
Unknown adjustment lengthThe objective is in very fine condition. No blemishes were apparent in the glass even when examined with a high-power loupe.
Photo set 1876
***MPN 46 20 92
***OEM Zeiss
***SKU*** 30081 -
Epiplan 20 / 0.3 Objective for Comparison
$160.00This is a specialized objective that is intended for the small Zeiss semiconductor comparison microscope. The objective thread is much smaller than the normal RMS thread (13.5mm diameter with a 0.35mm thread pitch). This objective also has an extension tube that is 34mm long. There are no optics in the extension tube.
The objective is engraved with an infinity symbol, slash, 1.5. This would indicate it was intended tfor looking at pattern geometry on semiconductor masks, with the substrate facing the objective (1.5mm thick glass).
Magnification � 20x
Numerical aperture � 0.30
Corrected for flat field imaging
Special attachment thread
Tube length � infinity
Unknown adjustment lengthThe objective is in excellent condition. No blemishes were apparent in the glass even when examined with a high-power loupe.
Photo set 1875
***MPN
***OEM Zeiss
***SKU*** 30080 -
Epiplan 10 / (0.2) 0.15 Objective for Comparison
$150.00This is a specialized objective that is intended for the small Zeiss semiconductor comparison microscope. The objective thread is much smaller than the normal RMS thread (13.5mm diameter with a 0.35mm thread pitch). This objective also has an extension tube that is 34mm long. There are no optics in the extension tube.
The objective is engraved with an infinity symbol, slash, 1.5. This would indicate it was intended for looking at pattern geometry on semiconductor masks, with the substrate facing the objective (1.5mm thick glass).
Magnification � 10x
Numerical aperture � 0.15 (marked 0.2 in parentheses)
Corrected for flat field imaging
Special attachment thread
Tube length � infinity
Unknown adjustment lengthThe objective is in excellent condition. No blemishes were apparent in the glass even when examined with a high-power loupe.
Photo set 1874
***MPN 46 20 92-9902
***OEM Zeiss
***SKU*** 30079 -
6.3x Ocular Pair for Stereo Microscope, 34mm
$150.00This is a very unusual pair of Zeiss stereo microscope oculars. I am not sure what instrument they are to be used with, but at 34mm, the diameter of the barrel is much larger than the ‘normal’ 30mm wide-field stereo microscope ocular. The magnification is 6.3x and they appear to be relatively high eyepoint.
The glass is in very fine condition � no scratches or delamination, but the lenses are definitely uncoated. The upper bezel does show some modest wear in the black lacquer (see photos). The rest of the ocular housing is in near-mint condition.
These are marked ‘Carl Zeiss Jena’ � Germany. It is most likely these are pre-war since the Jena factory started marking their optics ‘aus Jena’ shortly after the end of the war.
Photo set 1873
***MPN
***OEM Zeiss
***SKU*** 30078 -
Photo Changer Tubehead for Microscopes
$199.88Photo C.hanger Tubehead for Microscopes
This is a photo-changer module for attachment to research microscopes. It has a single ‘input’ port and three exit ports. There is a three-position prism slider that may also be rotated through 90 degrees. Using the combination of six possible positions the light is directed in one of five separate manners to the exit port (the third prism slider position has the same result in both rotation positions).The photo-changer requires the use of special relay lenses � one type is used for the input position where the device is attached to the microscope, and another type is used for each of the three exit ports. The input relay lens and the output relay opposite it are in perfect condition. The two ‘side-mounted’ relay lenses both exhibit some marginal delamination, one side a bit more than the other. However, if video or smaller size CCD cameras are mounted on these ports the image acquisition area will be well within the good portion of the relay lenses since only the center portion of the image is acquired.
The changer is in perfect mechanical and cosmetic condition � all parts work smoothly and effortlessly. All clamp screws are present.
BMI Surplus, Inc. has a huge inventory of new, pre-owned and refurbished Microscopes, Microscope Parts, Microscope Accessories and Components for sale.
We will work with you individually to find the perfect microscope or microscope parts for your application.Buy online or give us a call with any questions at 781-871-8868.
We have experienced customer service representatives standing by ready to help you!!**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have over 32 years of experience of shipping sensitive scientific instruments & industrial equipment.
We ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 47 30 51
***OEM Zeiss
***SKU*** 30056 -
Polyvar Mag Changer 0.8 / 1 / 1.25 / 2, with Dress
This is a complete magnification turret from a Polyvar SC research microscope. In includes relay lenses for 0.8x, 1x, 1.25x, and 2x magnifications. It also includes the bezel to replace the blank cover found on instruments that do not currently have a magnification turret.
The turret is in mint condition � all the optics are perfect. This assembly should be installed by a qualified microscope technician.
Photo set 1907
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN
***OEM Reichert
***SKU*** 30112 -
Graduated Rotary Microscope Stage with
$400.00This is a graduated rotating stage on a carrier for use on the larger tube-head type of research microscopes. It will also fit the Standard WL which uses the same dovetail attachment system. The stage is graduated in single degrees and readable via a vernier to 0.1 degrees. The stage rotation may be arrested using a small clamp screw in the vernier. The stage is missing the small insert plate. A suitable replacement could be fabricated without too much trouble.
Condition of both the stage and the carrier is excellent. Rotation is very easy and the graduations very strong and easy to read. One edge of the underside of the stage carrier has been neatly milled away for reasons unknown (see photo).
The inside diameter of the stage is 2.5″. This stage rotates a complete 360*.Photo set 1853
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN
***OEM Zeiss
***SKU*** 30058 -
Microscope Scanning Stage for Nikon Eclipse,
This Prior H101 microscope stage has an excursion range of 4 inches in the X direction and 3 inches in the Y direction. It features interchangable specimen inserts (one highly modified ‘solid’ insert is included). The stage is motorized and includes encoders for both axes. The scale for the encoder X-axis is loose and has been secured with a bit of tape. It has not been damaged (see fifth photo).
The stage has a ring plate adapter for the Nikon Eclipse E800 stage carrier (hence the model number H101E800). The adapter does not include the three mounting screws. It is shown resting in the recess in photo six.
The stage will require a controller with readout capability. These are available directly from Prior Instruments. The cables for the encoders are permanently attached to the stage. The cables for the stage motors are absent. Stage is in excellent condition (near mint except for a minor finish scratch to one side of the top surface).
Photo set 1844
BMI Surplus, Inc. is your best resource for microscopes and microscope components. We will work with you individually to find the perfect microscope for your application. For the most competitive pricing contact us by phone or click the purple �Ask us a question�� link above. We look forward to working with you!
***MPN H101E800
***OEM Custom
***SKU*** 30052 -
RA-Stand for Stereo Pods
$185.00This R-stand is the reflected-light only version (Type RA). It is missing one foot. Focus range is 50mm with the carrier having three interchangeable mounting positions.
Photo set 1835
***MPN 31-27-50-01
***OEM Bausch & Lomb (B&L)
***SKU*** 30044
