The PCle4 is a PCI express 4 lane interface that enables fast DMA and synchronous I/O transfer differential (LVDS or RS422) data between an external device and a computer.
The Vision RGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650 MB/s transfer bus bandwidth providing a further improvement to the 480 MB/s of the Vision RGB-E2. The vision RGB-E2S captures the analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage, or streaming.
General
Device Type
Video capture adapter
Interface Type
PCIe x4
Depth
6.7 in
Height
4.3 in
Video
Interface Type
Component video input, VGA input, DVI-Analog/Digital input, HDMI input
Video Modes
480p, 720p, 1080i, 1080p, 480i, 576i, 576p
Analog Video Signal
RGB
Digital Video Capture Speed
60 frames per second
Digital Video Capture Resolution
640 x 480, 1600 x 1200, 1024 x 768, 1280 x 1024, 800 x 600, 2048 x 1536, 1920 x 1080
Audio Input Support
Not available
Expansion / Connectivity
Interfaces
2 x display / video – DVI-Analog/Digital (dual link) – 24+5 pin combined DVI 1 x display / video – component video input – with adapter 1 x display / video – VGA input – with adapter 1 x display / video – HDMI input – with adapter
Vicor Corporation PRD48BH480T200B00 PRM48BH480T200B00 VI Chip PRM DC/DC,
Step Up or Down 1, Non-Isolated Outputs Evaluation Board
REGULATOR PRM 48V OUT 200W DEMO
PRM® Regulator
vicorpower.com
PRM® Regulator
PRM48BH480T200B00
S
C NRTL US
High Efficiency Remote Sense PRM Converter
FEATURES DESCRIPTION
• 45 V (38 to 55 V IN ), non-isolated ZVS buck-boost The VI Chip ® PRM ® Regulator is a high efficiency
regulator
• 5 to 55 V adjustable output range
• Building block for high efficiency DC-DC systems
• 200 W Output Power in 0.57 in 2 footprint
• 97% typical efficiency, at full load
• 1,300 W/in 3 (81 W/cm 3 ) Power Density
• Enables a 48 V to 1.5 V, 130 A isolated, regulated
solution with total footprint of 1.7 in 2 (11 cm 2 )
• Flexible “Remote Sense” architecture optimizes
regulation / feedback loop design to fit application
requirements
• Current Feedback signal allows dynamic adjustment of
current limit setpoint
• 4.93 MHrs MTBF (MIL-HDBK-217Plus Parts Count)
TYPICAL APPLICATIONS
• High Efficiency Server Processor and Memory Power
• High Density ATE system DC-DC power
• Telecom NPU and ASIC core power
• LED drivers
• High Density Power Supply DC-DC rail outputs
• Non-isolated power converters
converter, operating from a 38 to 55 Vdc input to generate
a regulated 5 to 55 Vdc output. The ZVS Buck – Boost
topology enables high switching frequency (~1 MHz)
operation with high conversion efficiency. High switching
frequency reduces the size of reactive components
enabling power density up to 1,300 W/in 3 .
The half VI Chip package is compatible with standard pick-
and-place and surface mount assembly processes with a
planar thermal interface area and superior thermal
conductivity.
In a Factorized Power Architecture™ system, the
PRM48BH480T200B00 and downstream VTM ®
transformer minimize distribution and conversion losses in
a high power solution.
An external control loop and current sensor maintain
regulation and enable flexibility both in the design of
voltage and current compensation loops to control of
output voltages and currents.