Showing 11881–11900 of 51941 results
-
Boom Stand with Counterweight and 25mm
$175.00This is an older version of the Scienscope boom stand. The system weighs almost 34 pounds but it includes an additional counter weight that adds another 10.25 pounds. The counterweight may either rest at the bottom of the vertical pillar, or it may be attached to the end of the horizontal boom. Dimensions of the stand are as follows:
Base -10 x 10 inches, 1.625 inches thick.
Pillar- 31mm diameter, 15.5 inches tall
Boom – 31mm diameter, 18 inches long
Boom travel – 14.5 inches without weight (11 inches when weight is installed on boom)On the end of the boom is an adjustable knuckle joint with a captive clamping lever. The diameter of the adjustable bar is 25mm, and it is approximately 150mm long. There is a stop plate on the end of the bar.
The stands are in very good condition and include an adjustable stop ring for the cross-bar holder.
Photo set 1795
***MPN
***OEM Scienscope
***SKU*** 30005 -
Programmable Pulse Generator Parts HP8161A
$1,000.00Manufacturer Description:
The Agilent HP 8161A Programmable Pulse Generator is a precision 100MHz HP-IB programmable pulse generator. All pulse parameters are programmable either from the front-panel keyboard or via the bus. In addition, each parameter, value, unit, as well as any error is logically displayed on the front panel. The Agilent HP 8161A can output pulses at up to 100MHz with transition times independently adjustable from 1.3 ns to 900 µs. High and low pulse levels are adjustable to ±5 V. Pulse width range is 4.0 ns to 990 ms and pulse delay is 0.0 ns to 990 ms. Double pulse range is selectable from 8.0 ns to 990 ms. The Agilent HP 8161A also has normal/compliment output selection and output enable/disable functions. Nine complete front-panel setups can be stored and recalled either from the front-panel or via the HP-IB bus.This unit has been tested and is not working – selling as parts.
***MPN 8161A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 29004 -
Programmable Pulse Generator Option 020 HP8161A (Parts Only)
$1,000.00Manufacturer Description:
The Agilent HP 8161A Programmable Pulse Generator is a precision 100MHz HP-IB programmable pulse generator. All pulse parameters are programmable either from the front-panel keyboard or via the bus. In addition, each parameter, value, unit, as well as any error is logically displayed on the front panel. The Agilent HP 8161A can output pulses at up to 100MHz with transition times independently adjustable from 1.3 ns to 900 µs. High and low pulse levels are adjustable to ±5 V. Pulse width range is 4.0 ns to 990 ms and pulse delay is 0.0 ns to 990 ms. Double pulse range is selectable from 8.0 ns to 990 ms. The Agilent HP 8161A also has normal/compliment output selection and output enable/disable functions. Nine complete front-panel setups can be stored and recalled either from the front-panel or via the HP-IB bus.This item has been tested and is not working properly – unit will not program between channels A & B – selling as is.
BMI Surplus, Inc. is your #1 resource for new & used test
equipment!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific instruments & industrial
equipment. We ship with the utmost care!!
***MPN 8161A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 29003 -
Programmable Pulse Generator HP 8161A
$2,000.00Manufacturer Description:
The Agilent HP 8161A Programmable Pulse Generator is a precision 100MHz HP-IB programmable pulse generator. All pulse parameters are programmable either from the front-panel keyboard or via the bus. In addition, each parameter, value, unit, as well as any error is logically displayed on the front panel. The Agilent HP 8161A can output pulses at up to 100MHz with transition times independently adjustable from 1.3 ns to 900 µs. High and low pulse levels are adjustable to ±5 V. Pulse width range is 4.0 ns to 990 ms and pulse delay is 0.0 ns to 990 ms. Double pulse range is selectable from 8.0 ns to 990 ms. The Agilent HP 8161A also has normal/compliment output selection and output enable/disable functions. Nine complete front-panel setups can be stored and recalled either from the front-panel or via the HP-IB bus.This used pulse generator has been tested and is in good working order..
BMI Surplus, Inc. is your #1 resource for new & used test
equipment!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific instruments & industrial
equipment. We ship with the utmost care!!***MPN 8161A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 29002 -
Pinhole, ~ 15 micron, in Threaded Mount
$40.00These pinholes appear to be fabricated from Newport unmounted foils � the diameter of the foil portion is about 9.5mm, however there was no information on either the mount or the foil itself. The foils have been taped to a threaded plug with a tapered bore on the opposite side from the thread.
The mounting thread is M20 x 0.75. The overall diameter of the mount is 25.5mm with an overall length of 11.25mm. Please see photos. Size of the pinhole was estimated by comparison with a known 25 micron pinhole using a simple microscope. The measurement was not a critical one and the diameter may be a bit less.
Photo set 1783
***MPN
***OEM Custom
***SKU*** 23193 -
Small CCD Lens in Mount 3mm f.l.
$40.00This is a compact multi-element objective, probably for use in machine vision.
The dimensions of the barrel include-Overall length – 16.2mm
Larger diameter – 14mm
Smaller diameter – 11mm
Length of smaller diameter – 12.3mm
Larger objective aperture – 8mm
Smaller lens aperture – 5mm
Focal plane lies ~3mm behind rear of housingThe elements do have a Mg Fl coating. Lens appears to be in perfect condition (spots in second image are dust particles from the tissue in which it had been wrapped).
Photo set 1778..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Camera Lenses for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM
***SKU*** 23188 -
Lake Shore Cryotronics 805 Temperature
$430.00This is a Lake Shore Cryotronics 805 Temperature Controller
This unit came from a working environment, powers on, but has not been tested further
Case colors may differ.
Manufacturer Description
The 805 Temperature Controller is a microprocessor based instrument whichprovides true analog control.
It accepts inputs from up to two sensors and displays the temperature with up to 4 digits of resolution in K, �C or �F.
It displays voltage for diodes to 1 millivolt,and ohms for resistors to four places.
***MPN 805
***OEM Lake Shore Cryotronics
***SKU*** 28895 -
Extron Medialink Switcher MLS 304MA
$20.00Extron Medialink Switcher MLS 304MA
Manufacturer Description:
The Extron MLS 304MA is a simple-to-use, four input, multi-format switcher with an integrated mono amplifier. It provides computer-video and composite video switching, along with stereo audio input switching. The switcher features mono 70/100 volt amplification for distributed audio applications. An additional input accepts balanced/unbalanced mono line level audio signals for mixing with any of the four switchable inputs. For enhanced operation, ease of room control, and simplified system integration, the MLS 304MA can be controlled with a TouchLink™ Control System or MediaLink Controller.
Features:
– 280 MHz (-3 dB) RGB video bandwidth
– Controllable via TouchLink™ Control System, MediaLink® Controller, front panel buttons, or RS-232
– Integrated mono audio amplifier provides 20 watts, rms, into 4 or 8 ohm speakers or 16 watts, rms, for 70/100 volt, distributed audio systems
– Triple-Action Switching™ for RGB delay
– Front panel security lockoutThis unit does not power on – selling as parts or for repair.
***MPN MLS 304MA
***OEM Extron
***SKU*** 28872 -
Majorpower Corp. MAJOR1PC3K-120RM Power Conditioner
$250.00This is a Majorpower Corp. MAJOR1PC3K-120RM Power Conditioner..
MajorPower major1pc3k power line conditioner. 120vac 60hz input.120 vac +/-5% 2kVA output. Unit powers on O.K.
Both available units tested with a high current variac O.K.
Cosmetic condition : good. Front indicator lamps dim but visible.Manufacturer Description:
Major1PC power (2-15 kVA) conditioners are hardwired, single-phase units featuring automatic voltage regulation. Major1PC units provide full protection against electrical noise created by lightning, utility switching, and electric motors. Voltage sags and spikes, switching transients and induced surges are all eliminated using Microprocessor-controlled, Zero-Current tap switching technology and a surge suppression circuit, which is linked to a shielded isolation transformer (with input and output filters).Major1PC units hold output voltage regulation to a maximum of ±5%, with an input voltage window of +15% and -25%. Response time to any line variation is less than 1.5 cycles..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Power Supplies For Sale!
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment.
We ship with the utmost care!!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN MAJOR1PC3K-120RM
***OEM Majorpower Corp
***SKU*** 28868 -
Bifurcated Fiber Optic Flexible Bundle, Vinyl
$50.00This is a flexible bifurcated fiber-optic bundle with the standard Dolan-Jenner blue vinyl-cladding. All of the ferrules are of identical dimensions.
Overall length is 36 inches, with the split occuring about 7 inches from the input ferrule.
Ferrule dimensions are 0.251 outer diameter with a 0.186 inch step 0.510 inches in length.
Input bundle diameter is 0.13 inches � output diameter is 0.080 inches.
Condition is excellent without any fiber drop-out.
Photo set 1768
***MPN
***OEM Dolan-Jenner
***SKU*** 23178 -
Armored Single Fiber Optic Bundle with Flange
$200.00This is a very large single-bundle fiber-optic light conduit. It has two types of armor with a stainless steel flange joining the two sections. The longer side is 190cm in length, and the cladding is flexible. The shorter side has a semi-rigid gooseneck cladding and is 55cm in length. The clear aperture of the bundle is 8mm. Total length of bundle is approximately 250cm.
The mounting ferrules differ as stated below.
Flexible side � 60mm total length, 20mm larger diameter; 14mm diameter step 35mm long
Rigid side � 36.25mm total length, 18mm larger diameter, 15mm diameter step 15mm long
Central mounting ferrule � 40mm total length, 42mm larger diameter, 2mm diameter step 32mm long
The bundle is in near-flawless cosmetic condition without any fiber drop-out from broken fibers. Very nicely made item.
Photo set 1761
***MPN
***OEM Custom
***SKU*** 23171 -
Zoom 6000 Lens Barrel 0.7 to 4.5
$250.00The Navitar Zoom 6000 main body, offered here, is a very high-performance video imaging system with a 6.5 to 1 zoom ratio maintaining parfocality throughout the zoom range. The optics have special coatings that are designed to reduce ghosting while enhancing the color response of video cameras. The zoom bodies require the use of adapters to relay the image to the camera CCD. These adapters, along with C-mount rings, are offered separately. In addition, optional front lens attachments are available to alter the working distance and resulting magnification..
This listing only includes the basic zoom body 6000. The working distance is approximately 92mm. When using a 1x adapter (not included), the magnification range is 0.7x to 4.5x. The image area when using a ½ inch detector ranges from 11.42mm to 1.77mm. When using a typical 13” monitor, this translates to an ‘on-screen’ magnification range of 29x to 186x.
With the addition of optional objective lens attachments, the magnification range can be altered by factors between 0.25x and 2x. These lens attachments also alter the working distance, 356mm when using the 0.25x attachment, to 36mm when using the 2x attachment. The lens attachments are not included with the basic main body. Please inquire regarding the availability of both the camera relay adapters and auxiliary lenses.
The zoom bodies are in perfect optical and mechanical condition, and near-perfect cosmetic condition.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Camera Lenses for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing..**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 1-6265
***OEM Navstar
***SKU*** 23141 -
Mass Flow Transducer CO2
$275.00Range in Nitrogen @ 0°C and 14.7 psia – 0-50 slpm
End Fittings – 3/8” Swagelok
150 PSIG MaxBMI Surplus, Inc. is your #1 resource for used, new, pre-owned, recycled & refurbished surplus vacuum equipment!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!
***MPN 8273-0454
***OEM Matheson
***SKU*** 28718 -
Mass Flow Transducer Argon
$300.00Range in Nitrogen @ 0°C and 14.7 psia – 0-50 slpm
End Fittings – 3/8” Swagelok
150 PSIG Max.BMI Surplus, Inc. is your #1 resource for used, new, pre-owned, recycled & refurbished surplus vacuum equipment!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!
***MPN 8273-0454
***OEM Matheson
***SKU*** 28716 -
Mass Flow Transducer Methane
$250.00Range in Nitrogen @ 0°C and 14.7 psia – 0-30 slpm
End Fittings – 1/4” Swagelok
150 PSIG Max.BMI Surplus, Inc. is your #1 resource for used, new, pre-owned, recycled & refurbished surplus vacuum equipment!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!
***MPN 8273-0415
***OEM Matheson
***SKU*** 28715 -
Fargo HDP825L ID Card Printer
$450.00Fargo Electronics HDP825L ID Card Printer
Specifications:
-High definition printing
-Transfer image onto clear film
-Heat transfer from film to ID card
Direct to card printing, high definition printing technology for tamperproof ID card printing.
The Fargo state-of-the-art functionality is for printing high-end security applications like Corporate IDs, Government and Military Badges, Driver�s Licenses, Educational IDs, and more.Unit is in excellent cosmetic condition. It has been powered on but has not been tested further.
BMI Surplus, Inc. has a huge inventory of new, pre-owned, recycled Computer Equipment For Sale!
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have over 30 years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN HDP825L
***OEM Fargo Electronics Inc
***SKU*** 28648 -
Varian 525 Cold Cathode Vacuum Gauge
$350.00Manufactures Description:
The Varian, Inc. Model 525 Cold-Cathode Gauge Tube measures pressures from 1 × 10-8 to 1 × 10-2 torr and has excellent repeatability, accuracy, and reliability. Sudden exposures to atmospheric pressure will not cause any damage, because there is no filament to burn out.The Model 525 Gauge is similar in construction to the inverted magnetron gauge, and so it can be started at very low pressures, where ordinary cold-cathode gauges are difficult to start.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Vacuum Measurement Equipment for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific and Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 525
***OEM Varian
***SKU*** 28629 -
Dessicant Breather Replacement Cartridge 39310
$200.00The Watchdog Desiccant Breathers are a unique particle filtration and water removal system. They prevent destructive contaminants from entering industrial equipment as air is breathed in and out due to thermal expansion or fluid level changes. They feature visual indication of the silica for replacement, which turns from gold to dark green..
By allowing only clean, dry air into industrial equipment, the Watchdog Desiccant Breathers prolong fluid life, reduce abrasive wear, downtime, and repair costs..
FEATURES:
�Water Vapor Adsorbent – the silica gel used adsorbs up to 40% of its own weight.
�Color Indicator – When maximum adsorption is reached the silica gel turns from gold to dark green, indicating replacement is needed. The silica gel used is chemically inert, non-corrosive, and does not contain cobalt chloride, a heavy metal. The color changing dye used is environmentally safe and meets all health and safety requirements.
�Dual Filtration System – A two micron filter (99% efficiency) is located at the top and bottom of the silica gel bed. The top filter removes particle contamination from atmospheric air and the bottom helps with dust created by the silica gel beads contacting each other.
�Activated Carbon – As air is expelled, it passes through activated carbon which removes oil vapors, fumes, and odors (except for part numbers 39131, 39132, 39133, and 39134).
�Bi-directional air flow – A 360� air flow allows air to be breathed in and out as fluid level changes or differential pressures occur. Expelled air “backflushes” the particulate filter to prolong the life of the breather.
�Durable construction – Watchdog desiccant breathers are manufactured from rugged ABS plastic and impact modified acrylic.SPECIFICATIONS:
Nominal Air Flow Rate 35 CFM (260 gpm of fluid volume change)
Particulate Filtration Level 2 micron absolute (99% efficiency)
Operating Temperature Range -20� to 200�F / -28� to 93�C
Silica Gel Adsorption Up to 40% of its weight of water
Material ABS plastic and impact-modified acrylic .***MPN 39310
***OEM Brand Unmarked
***SKU*** 29407 -
Peltier-Thermoelectric Cold Plate Cooler 24VDC
$200.00Manufacturer Description:
� Effective direct cooling.
� Compact design for space sensitive applications.
� Terminal block included for convenient wire attachment.
� Tapped holes in cold plate for easy attachment of object to be cooled.
� Ideal for precise temperature control applications.Two-module cold plate increases the heat-pumping capacity for cooling medium sized heat loads. Like all of our coolers, it can be easily customized to meet your production requirements: special cold plates, smaller heat sinks, different operating voltages, lower power consumption, et cetera. This cooler is powered by 24 VDC and is compatible with all of our temperature controllers.
***MPN CP-065
***OEM TE Technology Inc
***SKU*** 28516
