The Thorlabs High-Speed DET Photo Detectors are compact, versatile, high-speed optical detectors. Each model comes complete with a fast PIN photodiode and an internal bias battery packaged in a rugged aluminum housing. With a wide bandwidth DC-coupled output, these detectors are ideal for monitoring fast-pulsed lasers as well as DC sources. Each DET has a Bias-T circuit that combines a high frequency AC signal to a DC signal into a single output. The direct photodiode anode current is provided on a side panel BNC. This output is easily converted to a positive voltage using a terminating resistor. We recommend a 50Ω load resistance for the fastest response times. Each DET includes a 12V Bias battery installed.
The Thorlabs’ DET410 is a ready-to-use high-speed photo detector.
PLEASE CHECK THE COMPATIBILITY OF THIS NETWORK CARD WITH YOUR CURRENT HARDWARE. it IS THE BUYERS RESPONSIBILITY TO VERIFY THE COMPATIBILITY PRIOR TO PURCHASE.
GOOD CONDITION. PULLED FROM THE ORIGINAL MACHINE AND VISUALLY INSPECTED FOR DEFECTS.
THE BUYER IS RESPONSIBLE FOR PAYMENT OF ANY DUTIES, TARIFFS, OR TAXES DUE UPON RECEIPT OF THIS ITEM.
ONLY WHAT IS IN THE PHOTO IS INCLUDED IN THE SALE. IF A PART IS NOT SHOWN IN HTE PHOTOS, THEN IT IS NOT INCLUDED IN THE SALE OF THIS ITEM.
$250.00Original price was: $250.00.$200.00Current price is: $200.00.
Teledyne Philbrick model 1030 operational amplifier has been designed to provide FAST PRECISION operations. The 1030 operates as a unity gain follower and drives a 20v p-p 5MHz since wave into 500 ohm load with minimum distortion. The 1030 provides similar performance as a differential amplifier, or follower with gain.
/this amplifier has the open loop gain and dynamic stability to amplify high speed pulses to a precision of one part in 10,000 and sine waves with less than 1% distortion from dc to 5MHz
$175.00Original price was: $175.00.$130.00Current price is: $130.00.
The Hitachi WJ200 series comes with an integrated auto-tuning function for easy sensorless vector control that offers high starting torque of 200% or greater, suitable for a variety of applications.
Features of the WJ200:
High starting torque and dramatically improved speed stability with advanced sensorless vector control
New and more effective trip avoidance functions, safe-stop function
Simplified auto-tuning procedure (SLV)
Can be used for heavy and normal duty.
Easy setup and operation via standard integral keypad, optional enhanced keypad or via PC software
Password function to prevent parameters or to hide some of all parameters
Data comparison function: Display parameters changed from default setting
Capable of driving permanent magnet (PMAC) as well as standard induction motors
Dynamic braking transistor in all models
Built in Easy Sequence (EzSQ) PLC-like functionality
Simple position control capability
Basic display: Display most frequently used parameters.
User-changed parameter display: Store automatically and display the parameters changed by the user (Up to 32 sets); can also be used as change history.
Active parameter display: Display those parameters which are enabled.
$5,650.00Original price was: $5,650.00.$4,800.00Current price is: $4,800.00.
Acrison Stainless Steel Volumetric Dry Solids Screw Feeder Model BDFM-A
Ser 12261-01
Acrison Volumetric Feeders are universally recognized for their unique ability to accurately and reliably feed an extremely broad variety of dry solid materials. Their innovative and technologically superior designs provide exceptionally versatile metering performance. The quality of construction and durability of these volumetric feeders is unsurpassed; their maintenance requirements are the lowest in the industry.
The typical Gumstix configuration consists of a computer-on-module or COM and an expansion board.
The expansion board can be off-the-shelf from Gumstix or custom made. Gumstix openly publishes the schematics of all off-the-shelf expansion boards to assist rapid development of custom solutions.
For some applications, a camera board can be connected to the top of the Overo COM via a ribbon cable.
A typical Verdex Pro assembly consists of a Verdex Pro COM sandwiched between a 60-pin expansion board and an 80-pin expansion board.
The DuoVero COM, Overo COM and Verdex Pro COMs are unique to Gumstix.
The following information addresses the most common expansion options: a DuoVero COM with Parlor expansion board, an Overo COM mounted on a Tobi expansion board, and a Verdex Pro COM mounted on a Console-VX expansion board.
Overo and Tobi
An Overo COM connects to an Overo series expansion board via the two 70-pin AVX connectors located on the bottom side of the COM. Place the Tobi board on a flat, static-safe surface, align the COM with the white outline on the board above the connectors and gently press on the COM until it clicks into place.
The ADL5521 is a high performance GaAs pHEMT low noise
amplifier. It provides high gain and low noise figure for single-
downconversion IF sampling receiver architectures as well as
direct-downconversion receivers.
The ADL5521 provides a high level of integration by incorporating
the active bias and dc blocking capacitors, making it very easy
to use while not sacrificing design flexibility.
The ADL5521 is easy to tune, requiring only a few external
components. The device can support operation from 3 V to 5 V,
and the current draw can be adjusted with the external bias
resistor for applications requiring low power consumption.