Xilinx Virtex™ 6 PCI Express Gen 2 / SFP / USB 3.0 Development Board

Xilinx Virtex™ 6 PCI Express Gen 2 / SFP / USB 3.0 Development Board. Excellent condition. In hard plastic case with power supply. No manual. Purchaser responsible for proper use. As shown.

Designed for high-performance and high-density applications, the HTG-600 series are supported by Xilinx Virtex-6 LX550T, LX240T, LX365T, SX475T or SX315T FPGAs.  To expand functional capability and provide more flexibility, the HTG-600series are designed for operation in x8/x4/x1 PCI Express Gen 1, Gen 2 or stand-alone mode.

The HTG-600 series are supported by wide range of industry standard connectors and interfaces including; 8-lane PCI Express Gen2, Gigabit Ethernet (10/100/1000), SMA (connected to two Virtex-6 GTX serial transceivers & external clock), USB 2.0/3.0 Host, USB 2.0/3.0 Device, SFP, DDR3, and Vita-57 FPGA Mezzanine Connectors.

The expansion connectors provide access to up to 448 parallel IOs and 20 serial GTX transceivers of the on-board Virtex-6 device. The FMC connector can host off-the-shelf Vita-57 modules as well those developed by HiTech Global. Interfaces such as Single / Dual CX4, Dual / Quad SATA, Quad SFP, Dual / Quad SFP+ (20Gbps/40Gbps), and RJ45 are supported by the HiTech Global FMC modules.

To protect intellectual properties running on the Virtex-6 FPGA, the board is supported by an “IP Protection” chipset.

Supported Virtex-6 devices:

Features:

►Xilinx Virtex 6 LX550T, LX365T, LX240T, SX475T, or SX315T in different speed grades
►x8 PCI Express Gen 2 Edge Connector
►PCI Express Jitter Attenuator for cleaning PC clock and generating different PCIe clocks (100MHz, 250MHz, etc.)
►DDR3 SO-DIMM (up to 8GB)
►One USB 2.0 & 3.0 Host port
►One USB 2.0 & 3.0 Device port
►Two SFP ports (two SFP+ connectors are available through HTG-FMC-SFP-PLUS module)
►Four SMA connectors for one GTX serial transceiver port (8 additional SMA ports are available through HTG-FMC-8SMA module)
►Two SMA connectors for external differential clock
►Two 10/100/1000 Ethernet ports with SGMII, RGMII, and GMII support using Marvell 88E111 PHY (4 additional SGMII ports are available through HTG-FMC-RJ45 module)
►FMC Vita 57 compliant Connectors with:
– Connecter #1:
160 Single Ended IOs (or 80 LVDS), & ten Data-Rate-Adjustable GTX transceivers with the LX550T, LX365T, LX240T, SX475T, or SX315T models
– Connecter #2:
126 Single Ended IOs (or 63 LVDS) with the LX365T, LX240T, or SX315T models
160 Single Ended IOs (or 80 LVDS), & ten Data-Rate-Adjustable GTX transceivers with the LX550 and SX475 models
►Auxiliary FMC Super Clock for board-to-board communication
►Samtec QSE High-speed connectors with 32 pairs of LVDS IOs
►IP Protection Chipset
►Power Management Bus for all voltage rails
►Size: 9.5″ x 4.25″
►Support for both PCI Express and stand-alone operation modes
►Standard ATX and wall power supply connectors