Product Description
Noise Com UFX-EBNO-3100 Precision Carrier-to-Noise (C/N) Generator – Bit Error Rate Testing
This used Noise Com UFX-EBNO-3100 is a specialized instrument designed for generating precise carrier-to-noise (C/N) and carrier-to-interference (C/I) ratios for bit error rate (BER) testing and communication link analysis. Noise Com (now part of Wireless Telecom Group) is a leading manufacturer of noise generators and test solutions for wireless and telecommunications applications.
About C/N Generators
C/N generators are essential for:
-
BER testing of digital communication systems
-
Satellite link analysis – Simulating real-world signal conditions
-
Receiver sensitivity testing – Determining minimum operational signal levels
-
Modem and decoder testing – Verifying performance under noise
-
System margin measurement – Determining fade margins
The UFX-EBNO series combines a precision noise source with a calibrated signal path to create accurate C/N ratios over a wide range.
Key Specifications
| Specification | Details |
|---|---|
| Manufacturer | Noise Com |
| Model | UFX-EBNO-3100 |
| Type | Precision Carrier-to-Noise Generator |
| Frequency Range | [Likely 50 MHz to 3 GHz or similar – check unit] |
| C/N Range | [Typically 0 to 40 dB or more] |
| C/N Accuracy | [High precision – ±0.2 dB typical] |
| Noise Source | [Internal calibrated noise diode] |
| Output Power | [Adjustable, typically -20 to -90 dBm] |
| Interface | [GPIB, RS-232 for remote control] |
| Display | [Digital readout of C/N and levels] |
| Applications | BER testing, satellite comms, link analysis |
Applications
-
Satellite Communications: Testing modems, receivers, and links
-
Digital TV/Video: BER testing of QPSK, QAM modulators
-
Wireless Systems: Receiver sensitivity and fade margin testing
-
Military/Aerospace: Link budget analysis and system validation
-
Research & Development: Characterizing communication systems
-
Manufacturing Test: Production testing of receivers and modems
Condition
SOLD AS IS
USED – SHOWS NORMAL LAB WEAR (rack marks, scuffs, cosmetic wear)
RF OUTPUT: SMA or N-Type typical – INSPECT FOR CENTER PIN WEAR
POWER ON NOT TESTED – FUNCTIONALITY UNKNOWN
NO GPIB CABLE, POWER CORD, OR MANUAL INCLUDED
PICTURE MAY NOT MATCH PRODUCT
| Weight | 45.1 lbs |
|---|---|
| Dimensions | 24 × 24 × 12 in |
Related products
Signal Generators
