Kollmorgen graduated borescope probe
$250.00
Kollmorgen Borescope, (Electro-Optical Division). Borescope, Measuring Long Probe, Serial number 387.
Rigid probe housing, with right-angle mounted prism in probe tip (side window). Overall length of probe body is 550mm (21 5/8 inches). Distal end of probe is 0.370 inches (for 7.750 inches � steps up to .875 inches in diameter (that portion is 13 inches long, with a conical connection between the two diameters. Large diameter is graduated in inches, with divisions every 0.100 inch.
Right-angle viewing with illumination via fiber optics. Fiber optic armor-clad, with illumination centering puck on distal end. Active bundle diameter is 0.162 inches. Length of fiber optic lead is approximately six feet. Diameter of adapter at fiber bundle end is 1.560 inches.
Magnification adjustment ring marked �magnification factor�, graduated from 1 to 8.5 (with 10 divisions between numbers). Changing this setting seemed not so much to change the magnification but the focus point of the borescope. The borescope is missing the ocular (captive threaded ring is present, but the ocular is missing). Using an ocular from another instrument I determined that the closest focus point is about 4.5 inches away from the side mirror, and by adjusting the ring, I was able to focus to infinity. Therefore this instrument is for looking into cavities � you cannot focus on the wall of a bore that isn�t much larger than the diameter of the probe.
There are two articulating right-angle joints that can be set at any angle and clamped in order to avail oneself of the most comfortable viewing position. There is no ocular included with this instrument.
***MPN
***OEM Kollmorgen
***SKU*** 904
1 in stock
CompareProduct Description
Kollmorgen Graduated Borescope Probe (No Ocular)
This is a Kollmorgen graduated borescope probe, a specialized flexible or rigid optical probe designed for internal visual inspection and measurement within hard-to-reach areas such as engines, pipes, turbines, or castings. The probe features an integrated graduated scale in the field of view, allowing for direct dimensional measurement of defects, cracks, or clearances during inspection. This listing is for the probe only; no ocular (eyepiece), light source, or camera adapter is included.
Key Features:
-
Manufacturer: Kollmorgen (known for industrial vision and inspection systems)
-
Type: Graduated borescope probe (flexible or rigid; verify from photos)
-
Optics: Fiber optic image bundle with measurement scale etched into optics
-
Diameter & Length: Varies (common sizes: 4–10 mm diameter, 0.5–2 meters long)
-
Tip Configuration: Likely direct view (0°) or angled; may include articulation
-
Compatibility: Designed to connect to a Kollmorgen (or compatible) borescope ocular, camera, or video system
Potential Uses:
-
Borescope System Repair: Donor probe for restoring a compatible Kollmorgen borescope system.
-
Component Salvage: Harvest the optical fiber bundle, protective sheathing, graded scale reticle, and connectors.
-
Custom Inspection Setup: Adapt to a different borescope ocular or camera with matching interfaces (requires technical skill).
-
Educational Demonstration: Tool for teaching principles of remote visual inspection (RVI) and optical measurement.
Important Notes:
-
Incomplete System: This is only the probe. You will need a compatible light source, ocular, and possibly an adapter to use it.
-
Optical Condition Critical: Internal optics or fibers can be easily damaged; inspect carefully if functionality is required.
-
Measurement Accuracy: The graduated scale must be calibrated for specific magnification; accuracy is not guaranteed.
| Weight | 5 lbs |
|---|---|
| Dimensions | 30 × 7 × 4 in |
Related products
Optical Test Equipment
Optical Test Equipment
Optical Test Equipment
Advanced Optronics Inc. PCLC-1B Polarization Controller Driver
