Leitz 563 486 + 563 346 AF Modulopak Vertical Illuminator
$450.00
This Leitz modulopak vertical illuminator has the standard 42mm diameter annular dovetail change ring for attaching to the top of microscope stands of the generation that included, most notably, the Ergolux, Secolux, and Laborlux ME and HL. The upper housing includes a 1x infinity corrected tube lens and the mounting ring for the viewing tube. This illuminator must be used with infinity corrected objectives.
The central ‘brick’ contains a fixed Gauss beam-splitter for brightfield work, as well as an annular fully reflecting mirror for darkfield (both are on the same substrate glass so alignment is assured). This modulopak is a later version so the Gauss mirror does has a special dichroic coating that enables the attachment of the laser autofocus system. Above the mirror is a horizontal slot that accepts filter sliders, including analyzers for polarized light applications and interference contrast work (no filters are included). In the base of the housing is an annular condenser lens that is used when the darkfield method is employed. This ring focuses the light to a point somewhat above the objective lens turret where it then opens up into a cone that enters the top of the objective at an angle. This clever adaptation allows the design of darkfield objectives using standard RMS threads but it does mean that the distance of the objective from the illuminator is critical.
The illumination tube includes a recess for 35mm diameter mounted filters as well as a collector and relay lenses and three additional slots. The largest slot accommodates an included ‘F-Slide’ which has a precentered fixed aperture and field diaphragm. When this slider is moved to the alternate position a special darkfield system is engaged. This moves a central stop into the light path so the annular lens is then illuminated. There is also a neutral density filter that may be engaged on the bright-field side. This is very useful when alternating between bright and dark field illumination modes.
The second two slots are for an optional polarizer (for interference contrast applications) and a first order red compensator, also for interference contrast. Neither of these optional components are included – the original blank covers are present, however.
This illuminator is in perfect condition. The only marks on it are from a fiber optic adapter that was clamped onto the extension ring at the back of the illuminator. All optics are perfect and all adjustments work properly.
Photo set 1924
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 563 486 + 563 346
***OEM Leitz
***SKU*** 30129
1 in stock
Description
Description
This Leitz modulopak vertical illuminator has the standard 42mm diameter annular dovetail change ring for attaching to the top of microscope stands of the generation that included, most notably, the Ergolux, Secolux, and Laborlux ME and HL. The upper housing includes a 1x infinity corrected tube lens and the mounting ring for the viewing tube. This illuminator must be used with infinity corrected objectives.
The central ‘brick’ contains a fixed Gauss beam-splitter for brightfield work, as well as an annular fully reflecting mirror for darkfield (both are on the same substrate glass so alignment is assured). This modulopak is a later version so the Gauss mirror does has a special dichroic coating that enables the attachment of the laser autofocus system. Above the mirror is a horizontal slot that accepts filter sliders, including analyzers for polarized light applications and interference contrast work (no filters are included). In the base of the housing is an annular condenser lens that is used when the darkfield method is employed. This ring focuses the light to a point somewhat above the objective lens turret where it then opens up into a cone that enters the top of the objective at an angle. This clever adaptation allows the design of darkfield objectives using standard RMS threads but it does mean that the distance of the objective from the illuminator is critical.
The illumination tube includes a recess for 35mm diameter mounted filters as well as a collector and relay lenses and three additional slots. The largest slot accommodates an included ‘F-Slide’ which has a precentered fixed aperture and field diaphragm. When this slider is moved to the alternate position a special darkfield system is engaged. This moves a central stop into the light path so the annular lens is then illuminated. There is also a neutral density filter that may be engaged on the bright-field side. This is very useful when alternating between bright and dark field illumination modes.
The second two slots are for an optional polarizer (for interference contrast applications) and a first order red compensator, also for interference contrast. Neither of these optional components are included – the original blank covers are present, however.
This illuminator is in perfect condition. The only marks on it are from a fiber optic adapter that was clamped onto the extension ring at the back of the illuminator. All optics are perfect and all adjustments work properly.
Photo set 1924
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN 563 486 + 563 346
***OEM Leitz
***SKU*** 30129
Additional information
Additional information
| Weight | 5.1 lbs |
|---|---|
| Dimensions | 8 × 16 × 8 in |
