Fiber Optic Light Source with 150w Lamp Dual
$180.00
The Volpi fiber optic illumination systems are among the finest produced. The Intralux 6000 was a top-of-the-line illuminator. It featured a three-position lamp intensity switch alternating between two direct connections to the transformer secondaries (no resistors in series for reducing intensity). The middle position switches off the mains supply.
A very quiet cage fan is positioned immediately behind the lamp socket and provides very ample cooling even with the higher intensity selected. Additional regulation of the lamp output is possible using a helical wedge that reduced the amount of light to the end of the fiber bundle. A special dichroic heat filter is interposed between the lamp and the fiber bundle. In addition, there is a slot on the top of the unit for reception of special filter carriers. An empty holder is supplied with the illuminator.
The illuminator uses type DDL halogen lamps (150w 20v). Access to the lamp socket is via a wide door on the top of the housing. Lamps are easily exchanged without the use of any tools. The port for the fiber bundles is 15mm in diameter, and has a small keyway used to prevent rotation of the gooseneck type (semi-rigid) bundles.
The lamp socket is in very good condition and holds the lamp very firmly. It may be easily replaced when required using a terminal block accessed after removing the door. The instrument is fully functional. Cosmetically, the finish of the housing does have a few scratches near the handle, and the rubber molded grip on the aluminum handle has frayed a bit on one end (see photo).
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN Intralux 6000
***OEM Volpi
***SKU*** 30147
1 in stock
Description
Description
The Volpi fiber optic illumination systems are among the finest produced. The Intralux 6000 was a top-of-the-line illuminator. It featured a three-position lamp intensity switch alternating between two direct connections to the transformer secondaries (no resistors in series for reducing intensity). The middle position switches off the mains supply.
A very quiet cage fan is positioned immediately behind the lamp socket and provides very ample cooling even with the higher intensity selected. Additional regulation of the lamp output is possible using a helical wedge that reduced the amount of light to the end of the fiber bundle. A special dichroic heat filter is interposed between the lamp and the fiber bundle. In addition, there is a slot on the top of the unit for reception of special filter carriers. An empty holder is supplied with the illuminator.
The illuminator uses type DDL halogen lamps (150w 20v). Access to the lamp socket is via a wide door on the top of the housing. Lamps are easily exchanged without the use of any tools. The port for the fiber bundles is 15mm in diameter, and has a small keyway used to prevent rotation of the gooseneck type (semi-rigid) bundles.
The lamp socket is in very good condition and holds the lamp very firmly. It may be easily replaced when required using a terminal block accessed after removing the door. The instrument is fully functional. Cosmetically, the finish of the housing does have a few scratches near the handle, and the rubber molded grip on the aluminum handle has frayed a bit on one end (see photo).
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN Intralux 6000
***OEM Volpi
***SKU*** 30147
Additional information
Additional information
| Weight | 13.1 lbs |
|---|---|
| Dimensions | 8 × 16 × 12 in |
