ATA ARS-15 MHD Angular Rate Sensor

$750.00

2 in stock

Quantity
M78L4 B5 SKU: 78767 Categories: ,

Description

The ATA ARS-15 MHD Angular Rate Sensor is a new, rugged angular rate sensor designed to fill the gap between the ARS-06 and the ARS-12. With a noise floor of about 300 nanoradians and a small case size, the sensor can operate where size is an issue but the ultra-low noise floor of the ARS-12 is not needed.

The stainless steel housing and mounting plate make a rugged assembly, able to operate accurately after a TBDg shock load. Its compact sis and mass allow use in very small spaces. The ARS-15 has a wide, useable frequency range from less than 3 Hz to more than 1,000 Hz. The scale factor of the ARS-15 is nominally 1V/rad/sec, but can be customized based on customer requirements.

Angular Rate Standard Range

Angular Rate Standard Scale Factor
Bandwidth
Cross-axis Angular Error Linear Acceleration Sensitivity

Noise Equivalent Rate Noise Equivalent Angle

Non-Linearity Temperature Coefficient

± 10 rad/sec

1 V/rad/sec

2.5 to 1000 Hz < 1%
<0.1 mrad/sec/g

<30 microradians/s (rms, 2.5-1000 Hz)
<300 nanoradians (rms, 2.5- 1000 Hz)

< TBD %
<TBD % Scale Factor/°C

Power Dissipation Output Impedance Grounding

< 0.3 Watts
< 100 Ohms
Case isolated from signal common by 1MΩ minimum

Temperature – Operating
Temperature – Non-Operating
Linear Acceleration, Maximum Operating Linear Acceleration, Maximum Survivable

-35 to +60°C -35 to +60°C 500g any axis TBDg any axis

Key Specifications:

  • ATA’s patented MHD angular motion sensors utilize the finest materials and workmanship combined in durable packages that feature:

    • No moving parts
    • Dynamic range > 100 dB
    • Low power consumption
    • Low linear acceleration sensitivity
    • Integral electronics/low noise
    • High survivable shock limit
    • This product is subject to U.S. Government approval for all hardware export licenses, end-user certificates and technical assistance agreements as required in accordance with the U.S. Government International Traffic in Arms (ITAR) Regulations requirements can be found in Subchapter M, Title 22, Code of Federal Regulations, Parts 120 through 130 (22 CFR 120-130).

       

Additional information

Weight 1 lbs
Dimensions 3 × 3 × 3 in