Showing 61–80 of 4564 results
-
JDSU / Acterna T-berd 8000 for PARTS/REPAIR
$995.00JDSU / Acterna T-berd 8000 for PARTS/REPAIR. Unit(s) as shown in image – no power supply, manual, software or other accessories. Untested. Last calibration seal on ODTR SR module as shown in image gallery.
-
EG & G 5209 Single Phase Lock-In Amplifier 0.5 Hz – 120 kHz
$300.00EG & G 5209 Single Phase Lock-In Amplifier 0.5 Hz – 120 kHz Features: Frequency range: 0.5 Hz to 120 kHz Voltage sensitivity: 100 nV to 3 V full-scale Current input mode sensitivities: 10 fA to 300 nA full-scale 10 fA to 3 μA full-scale Line frequency rejection filter Fundamental (sine wave) or square-wave response modes Very low phase noise of < 0.005° rms. 3½-digit output readings Oscillator with variable amplitude and frequency Output time constants from 1 ms to 3 ks with 6 or 12 dB/octave roll-off Four external auxiliary ADC inputs Two external auxiliary DAC outputs Full range of auto-modes Standard GPIB (IEEE-488) and RS232 interfaces Two liquid crystal displays (LCD) and an analog panel meter for control and display of instrument outputs. No manual, cables or accessories.
-
Hewlett Packard 11974-60028 Preselector Mixer Power Supply
$250.00Hewlett Packard 11974-60028 Preselector Mixer Power Supply. Unit tested O.K. All 11974 series mixers connect to this stand alone power supply with a convenient 6-foot cable (part number 5061-5458). Use this same power supply with any 11974 series pre-selected mixer. 11974 series pre-selected millimeter mixers are compatible with 8566B, 8560 series and E4407B of rugged portables, 70000 Series modular spectrum analyzers, and the PSA Series. No manuals, cables or accessories are included.
-
FICO, Inc. 331PUL0200 ST-ST MM Pulse Suppressor 200 Feet
$350.00FICO, Inc. 331PUL0200 ST-ST MM Fiber Optic Pulse Suppressor 200 Feet. In Plastic case. No Manual.
-
FICO, Inc. 88A4PUL0500 FC-FC/APC SM Pulse Suppressor 500 Meters
$350.00FICO, Inc. 88A4PUL0500 FC-FC/APC SM Fiber Optic Pulse Suppressor 500 Meters. Unit in plastic case. No manual.
-
Agilent E5403A-68702 Retention Modules (SET OF 5) For Pro Series Soft Touch Connectorless Probes
$100.00Agilent E5403A-68702 Retention Modules (SET OF 5) For Pro Series Soft Touch Connectorless Probes
-
Agilent E5405A Pro Series Soft Touch Connectorless Probe-Differential, For 90 Pin Cable
$6,000.00Agilent E5405A Pro Series Soft Touch Connectorless Probe-Differential, For 90 Pin Cable
-
Agilent E5406A Single-Ended Connectorless Probe
$6,000.00Agilent E5406A Single-Ended Connectorless Probe
34 Channel, Soft Touch Pro, Connects to 90 Pin Cable
-
Agilent E5378A Samtec Probe-Single-Ended, w/ 90 Pin Cable Connectors
$750.00Agilent E5378A Samtec Probe-Single-Ended, w/ 90 Pin Cable Connectors
-
Tektronix TFP2A FiberMaster Optical Time-Domain Reflectometer
Original price was: $600.00.$525.00Current price is: $525.00.Tektronix TFP2A FiberMaster Optical Time-Domain Reflectometer. Unit powers on and completes self-test, self-calibrate and system initialization / startup. Display is bright. Cooling fan is quiet and clean. No further testing performed. FG 1315 module for 1310nm and 1550nm installed in upper position. FM 8513 for 850nm and 1300 nm installed in lower position. Includes a padded storage case. No manual, software, cables, fiber or other accessories. Purchaser will be responsible for any alignments, calibration or certification.
-
Agilent E5382A probe/contact accessories
Original price was: $125.00.$100.00Current price is: $100.00.Agilent E5382A probe/contact accessories. As shown. In storage case. NO PROBE ASSEMBLY.
-
Agilent E5382A Single-Ended Flying Lead Set
Original price was: $990.00.$925.00Current price is: $925.00.Agilent E5382A Single-Ended Flying Lead Set. Like new. In original padded storage case. With accessories shown.
-
Agilent Keysight E5381A flying lead set.
Original price was: $990.00.$925.00Current price is: $925.00.Agilent Keysight E5381A flying lead set. Like new. In original padded storage case. With accessories shown.
-
Acopian Variable Hi-Voltage Power Supply Model P02.5HP24. 2.5KV 24ma
Original price was: $750.00.$650.00Current price is: $650.00.Acopian Variable Hi-Voltage Power Supply Model P02.5HP24. 2.5KV 24ma. Unit tested O.K. with H.V. probe. No manuals, cables or other accessories are included.
-
Tektronix P6434 Mass Termination Probes w/ Extenders (Set of 2)
$60.00Tektronix P6434 Mass Termination Probes w/ Extenders (Set of 2)
-
AMPHENOL AEROSPACE OPERATIONS D38999/26WD19PN
$175.00AMPHENOL AEROSPACE OPERATIONS D38999/26WD19PN
CONNECTOR PLUG MALE WITH PIN# M39029/58-363 (20)
19 POSITION CIRCULAR CONNECTOR PLUG, MALE PINS CRIMP
-
Agilent E5320-26101 Flexible Ground Pins – LOT OF 21
$300.00Agilent E5320-26101 Flexible Ground Pins – LOT OF 21
-
PIEZOELECTRIC MICROPHONE MODEL 2510
$250.00PIEZOELECTRIC MICROPHONE MODEL 2510
HIGH INTENSITY ACOUSTIC MEASUREMENT
OPERATIONAL RANGE 100 TO >180dB SPL
MODEL 2510 S/N DN62
-
MINI-CIRCUIT ZVE-3W-83+
$1,500.00MINI-CIRCUIT ZVE-3W-83+
COAXIAL HIGH POWER AMPLIFIER
2000-8000MHZ
High power, 3 Watt
y Wideband, 2000 to 8000 MHz
y Low noise figure, 5.8 dB typ.
y High IP3, +42 dBm typ.
y High dynamic range
y High gain, 35 dB typ. and good directivity, 35 dB typ.
y Internal voltage regulated for 13 to 18 VDC -
Hewlett Packard 86120B multi-wavelength optical power meter 700-1650nm
$4,500.00Hewlett Packard 86120B multi-wavelength optical power meter 700-1650nm. Unit powers on and completes self-test and self-calibration. Cooling fan is quiet and dust/grime free. Display is slightly dim but useable. Unit tested O.K. with our SKU #12505 (sold separately) as shown in the image gallery. No manual, face cover or accessories are included. Desk feet with tilt stands are installed but the rubber surround for the face is not. Purchaser will be responsible for any calibration/certification required.
