-
$3,000.00
Existing manual antenna ranges can be upgraded to a modern microwave receiver
Positioner offset angle can be entered from the receiver to accomodate easily boresighting the antenna.
The positioner angle for the active axis (corrected for the offset angle) is displayed continuously
Easy operation
Antenna Test, RF Subsystems – 10 MHz to 26.5 GHz, extendable to higher frequencies.
***MPN 85370A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 17658
-
$400.00
Features:
•Fast and easy to use
•Portable, lightweight, battery operated
•Non-destructive passivation testing
•Easy to read digital display
•Safe – no hazardous chemicals
This product is missing some pieces
***MPN 2026
***OEM Koslow Scientific Co.
***SKU*** 16266
-
$495.00
Key Features:
– DC-26.5 signal switching
– Matrix, multiplexer, and general purpose relays
– Digital I/O control and actuation
– Up to 50 channels
– 40 configuration storage registers
– 11 switch and control modules
Output Voltage: 0 to ±5kV
Current: 5mA
5000V – 25W
This unit has been tested and is functioning properly. This unit contains two HP 44474A parts and three HP 44478A parts – 44478A needs a BNC connector.
***MPN 3488A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 16257
-
Call 781-871-8868 for Price
Unit is a Micro-Con A228001-1 X-Band Phase Control Unit.
Manufactures Product Features
-Independent Phase Control of 2 Output Signals Derived from a Single Input
-Independent 180o Digital Phase Shifters in Each Output Channel
-Independent Analog Phase Shifters with 400oRange in Each Output Channel
-Includes Signal Amplification
-Operates from -40ºC to +85ºC
-Used for Control of Clock Phase In High Capacity Optical Communication Systems
Manufactures description
The A228001-1 is a high performance multifunction device that amplifies and divides a single X-band input signal into two phase-controlled output signals. The phase of the two output signals are independentlycontrolled through the use of analog phase shifters and digitally controlled 180 degree phase shifter bits that are included in each output channel. In addition to the very accurate 180 degree bit, the output phase can be continuously varied up to another 400 degrees through the use of the analog phase shifters. Integral differential line receivers enable high speed analog control of the output signal phase. The hermetically sealed PhaseControl Unit is intended for use in high capacity data communication applications such as optical long-haul data networks
***MPN A228001-1
***OEM Micro-Controle / Klinger
***SKU*** 13207
-
$1,400.00
WR-28 Crystal Waveguide Detector specs are:
Frequency response: ±0.6 dB
Maximum SWR: 1.78
Low-level sensitivity: > 0.42 mV/uW
Maximum input power (average): 100 mW
Video impedance: 1.5 kilo-ohm
RF bypass capacitance: 10 pF
Waveguide designator: EIA WR-28 MIL-W-85/3-008
Flange designator: UG-599/U MIL-F-3922/54-003
Output connector: BNC female.
Detector was in good working order. when originally placed in inventory.
BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Test Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.
**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN R422C
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 14090
-
$120.00
Harris TS22AL lineman test set. Unit tested O.K. with analog telco line.
Condition : Good. Minor scuffs. With bed of nails alligator clips.
***MPN TS22AL
***OEM Harris Corporation
***SKU*** 63541
-
$95.00
Hewlett Packard 10511A Spectrum Generator
***MPN 10511A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 64318
-
$50.00
Hewlett Packard 8731B Pin Modulator 400-1200 Mhz
***MPN 8731B
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 63489
-
$99.00
3M Model 724 Work Station ESD Monitor
Unit powers on with test power supply.
Cosmetic Condition : Very good. No power supply, cables or other accessories.
***MPN 724
***OEM 3M
***SKU*** 62886
-
$800.00
Hewlett Packard 5086-7503 + 5062-4511
SYTM2 0.01 – 20 GHz
***MPN 5086-7503
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 63086
-
$200.00
Tektronix A6901 ground isolation monitor.
Unit(s) tested O.K.
Condition : Very good.
***MPN A6901
***OEM Tektronix, Inc (TEK)
***SKU*** 62853
-
$85.00
Fluke WireView Wiremapper
***MPN
***OEM Fluke
***SKU*** 62917
-
$65.00
Omni Spectra Directional Coupler 2024-6430-10
10 dB
12.4-18.0 GHz
SMA (F-F-F)
***MPN 2024-6430-10
***OEM Omni-Spectra
***SKU*** 62660
-
$3,500.00
H.P. 11792A Sensor module 50Mhz – 26.5Ghz 3.5mm precision connectors. Untested.
Condition : Excellent. Last Agilent factory calibration tamper seals intact. Dust caps in place.
***MPN 11792A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 62850
-
$10,900.00
ESI RS925D Resistance standard. Unit tested O.K.
Condition : Very good. Last calibration tamper seal intact.
High accuracy – 20 ppm + 0.5 mΩ
High stability – 20 ppm + 0.5 mΩ
Resistance from 10 mΩ to 1.1 MΩ
20 μΩ resolution In order to eliminate contact resistance and thermal emf, the RS925D integrates a rheostat. As a result, voltage and contact resistance effects are removed by being effectively added to the input impedance of the measuring instrument.
Low temperature coefficient – as low as 3 ppm/°C
High performance solid silver contact switches
Hermetically sealed, low inductance resistors
Precise fixed minimum resistance
***MPN RS925D
***OEM Electro Scientific Ind
***SKU*** 62839
-
$1,200.00
IET Labs VI-700 precision voltage and current source. Unit powers on and tested O.K.
Condition : Very good. Last calibration sticker and tamper seal.
***MPN VI-700
***OEM IET Labs Inc
***SKU*** 62810
-
$1,500.00
Signia IDT SI-9291 6 Ghz frequency extender. Unit(s) power on. Run and Aux LED’s illuminate. No further testing performed.
Condition : Excellent. Power and Data wire included. No other accessories, hardware, manuals, or specifications available.
***MPN SI-9291
***OEM
***SKU*** 62806
-
$125.00
Granville-Phillips Analog Convectron Gauge Controller Series 275
***MPN Series 275
***OEM Granville-Phillips
***SKU*** 62524
-
$275.00
USB-6229 Multifunction I/O Device National Instruments
***MPN USB-6299
***OEM National Instruments (NI)
***SKU*** 62515
-
$800.00
HP 85051B Verification Kit 7mm
From Manufacturer:
The H.P. 85051B verification kit has a 7 mm connector and covers a frequency range of 300 kHz to 18 GHz. This kit includes a 10 cm airline, stepped impedance airline, 20 dB and 50 dB attenuators. The verification kit is used with a Keysight 7 mm calibration kit and Keysight PNA series network analyzers.
Verification kits are used to verify that a network analyzer is operating within its specified performance. All verification kits include measurement data and uncertainties that are traceable to the U.S. National Institute of Standards and Technology (NIST).
***MPN 85051B
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 62410