CVI Laser 633FS10-25 Optical Mirror
Good Condition
Check BMI Stock for More Items
***69878***

Optical Coating Laboratory 15-3625-430 Optical Mirror
Good Condition
Check BMI Stock for More Items
***69868***

CVI Laser RL235918 Optical Lens
Good Condition
Check BMI Stock for More Items

Virgo Optics L-395353 Optical Mirror (lot of 2)
Good Condition
Check BMI Stock for More Items
***69855***

Thor Labs 2″x2″ Optical Mirror
Good Condition
Check BMI Stock for More Items
***69853***

AOA PO2-E313121-2 High Reflectance Mirror
Good Condition
Check BMI Stock for More Items
***69773***

Edmund Optics 32-270 Elliptical Mirror

Uncoated

Like New
Check BMI Stock for More Items
***66148***

Newport 05D20LD.2 Round Pyrex Mirror

0.5 in 1/10 wave

***MPN 05D20LD.2
***OEM Newport Research Corp (NRC)
***SKU*** 64658

This is one of a pair of collimation mirrors removed from a 50cm Jarrell-Ash monochromator. The mirrors have the following characteristics.

Size � 84.15mm x 68.07mm
Thickness (at corners) � 17.5mm
Focal length � approximately 515mm
Coating � Al

The mirrors coatings are in rough shape. These will need to be recoated before they are useful. Substrate appears to be undamaged (one of the two mirrors has a very small corner chip that does not impinge upon the coated area). This listing is for a single mirror.

Photo set 1997
***MPN
***OEM Jarrell Ash
***SKU*** 30190

This concave mirror was removed from an ITEK lens assembly which would speak exceptionally highly of its quality. (ITEK used to fabricate the optics used in the spy satellites for the military and the NSA). Characteristics include:

Diameter � 4.750 inches
Active area � 4.20 inches
Radius � approximately 280mm, CC
Substrate � Zerodur
Coating � Al ?
Weight � 1.30 pounds

The mirror has numerous small pits clustered near the center and a few scattered about the rest of the surface. The rest of the coating and surface appears to be unblemished � no haze and no scratches. The mirror is certainly very serviceable as it sits.

Photo set 1994
***MPN
***OEM ITEK
***SKU*** 30187

This is a nearly plane concave mirror of 5.5 inches in diameter. The substrate is opaque but relatively light. Characteristics include:

Diameter � 5.50 inches
Figure � concave, R = 8097.4mm
Active area � 5.00 inches
Thickness � 1.017 inches
Substrate –
Weight � 1.99 pounds

The coated surface does have some burns in places � obviously intended for use with a CO2 laser. Otherwise the surface is in excellent condition with a few very light scratchs. The reverse side is marked with the work order number (12281-8A), the part number (7R018069), and the run number (871022-72). Also noted is the radius stated above.

Photo set 1993
***MPN 7R028069
***OEM Custom
***SKU*** 30186