The Vision RGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650 MB/s transfer bus bandwidth providing a further improvement to the 480 MB/s of the Vision RGB-E2. The vision RGB-E2S captures the analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage, or streaming.
General
Device Type
Video capture adapter
Interface Type
PCIe x4
Depth
6.7 in
Height
4.3 in
Video
Interface Type
Component video input, VGA input, DVI-Analog/Digital input, HDMI input
Video Modes
480p, 720p, 1080i, 1080p, 480i, 576i, 576p
Analog Video Signal
RGB
Digital Video Capture Speed
60 frames per second
Digital Video Capture Resolution
640 x 480, 1600 x 1200, 1024 x 768, 1280 x 1024, 800 x 600, 2048 x 1536, 1920 x 1080
Audio Input Support
Not available
Expansion / Connectivity
Interfaces
2 x display / video – DVI-Analog/Digital (dual link) – 24+5 pin combined DVI 1 x display / video – component video input – with adapter 1 x display / video – VGA input – with adapter 1 x display / video – HDMI input – with adapter
Vicor Corporation PRD48BH480T200B00 PRM48BH480T200B00 VI Chip PRM DC/DC,
Step Up or Down 1, Non-Isolated Outputs Evaluation Board
REGULATOR PRM 48V OUT 200W DEMO
PRM® Regulator
vicorpower.com
PRM® Regulator
PRM48BH480T200B00
S
C NRTL US
High Efficiency Remote Sense PRM Converter
FEATURES DESCRIPTION
• 45 V (38 to 55 V IN ), non-isolated ZVS buck-boost The VI Chip ® PRM ® Regulator is a high efficiency
regulator
• 5 to 55 V adjustable output range
• Building block for high efficiency DC-DC systems
• 200 W Output Power in 0.57 in 2 footprint
• 97% typical efficiency, at full load
• 1,300 W/in 3 (81 W/cm 3 ) Power Density
• Enables a 48 V to 1.5 V, 130 A isolated, regulated
solution with total footprint of 1.7 in 2 (11 cm 2 )
• Flexible “Remote Sense” architecture optimizes
regulation / feedback loop design to fit application
requirements
• Current Feedback signal allows dynamic adjustment of
current limit setpoint
• 4.93 MHrs MTBF (MIL-HDBK-217Plus Parts Count)
TYPICAL APPLICATIONS
• High Efficiency Server Processor and Memory Power
• High Density ATE system DC-DC power
• Telecom NPU and ASIC core power
• LED drivers
• High Density Power Supply DC-DC rail outputs
• Non-isolated power converters
converter, operating from a 38 to 55 Vdc input to generate
a regulated 5 to 55 Vdc output. The ZVS Buck – Boost
topology enables high switching frequency (~1 MHz)
operation with high conversion efficiency. High switching
frequency reduces the size of reactive components
enabling power density up to 1,300 W/in 3 .
The half VI Chip package is compatible with standard pick-
and-place and surface mount assembly processes with a
planar thermal interface area and superior thermal
conductivity.
In a Factorized Power Architecture™ system, the
PRM48BH480T200B00 and downstream VTM ®
transformer minimize distribution and conversion losses in
a high power solution.
An external control loop and current sensor maintain
regulation and enable flexibility both in the design of
voltage and current compensation loops to control of
output voltages and currents.
Analog Devices Inc. ADM7172CP-EVALZ Evaluation Board helps designers evaluate the functionality of the ADM7172 linear regulators. ADM7172CP-EVALZ can provide simple device measurements, such as line and load regulation, dropout, and ground current with just a single voltage source, a voltmeter, an ammeter, and load resistors.
2.3V to 6.5V Input voltage range
0mA to 2A Output current range
−0.5%/+1% Output voltage accuracy
-40°C to +125°C Operating temperature range
Output voltage can also be adjusted up with two external resistors from any fixed output voltage option
The ADL5801 uses a high linearity, doubly balanced, active
mixer core with integrated LO buffer amplifier to provide high
dynamic range frequency conversion from 10 MHz to 6 GHz.
The mixer benefits from a proprietary linearization architecture
that provides enhanced input IP3 performance when subject to
high input levels. A bias adjust feature allows the input linearity,
SSB noise figure, and dc current to be optimized using a single
control pin.
he high input linearity allows the device
to be used in demanding cellular applications where in-band
blocking signals may otherwise result in degradation in dynamic
performance. The adaptive bias feature allows the part to provide
high input IP3 performance when presented with large
blocking signals. When blockers are removed, the ADL5801
can automatically bias down to provide low noise figure and
low power consumption.
The ADL5801 is fabricated using a SiGe high performance IC
process. The device is available in a compact 4 mm × 4 mm,
24-lead LFCSP package and operates over a −40°C to +85°C
temperature range. An evaluation board is also available
The ADL5801 uses a high linearity, doubly balanced, active
mixer core with integrated LO buffer amplifier to provide high
dynamic range frequency conversion from 10 MHz to 6 GHz.
The mixer benefits from a proprietary linearization architecture
that provides enhanced input IP3 performance when subject to
high input levels. A bias adjust feature allows the input linearity,
SSB noise figure, and dc current to be optimized using a single
control pin.
The high input linearity allows the device
to be used in demanding cellular applications where in-band
blocking signals may otherwise result in degradation in dynamic
performance. The adaptive bias feature allows the part to provide
high input IP3 performance when presented with large
blocking signals. When blockers are removed, the ADL5801
can automatically bias down to provide low noise figure and
low power consumption.
The ADL5801 is fabricated using a SiGe high performance IC
process. The device is available in a compact 4 mm × 4 mm,
24-lead LFCSP package and operates over a −40°C to +85°C
temperature range. An evaluation board is also available.
The ADL5521 is a high performance GaAs pHEMT low noise
amplifier. It provides high gain and low noise figure for single-
downconversion IF sampling receiver architectures as well as
direct-downconversion receivers.
The ADL5521 provides a high level of integration by incorporating
the active bias and dc blocking capacitors, making it very easy
to use while not sacrificing design flexibility.
The ADL5521 is easy to tune, requiring only a few external
components. The device can support operation from 3 V to 5 V,
and the current draw can be adjusted with the external bias
resistor for applications requiring low power consumption.
The ADL5521 comes in a compact, thermally enhanced, 3 mm ×
3 mm LFCSP and operates over the temperature range of
−40°C to +85C.