2 inch Gimbal Mount Lens Holder with Angle

$225.00

2 inch Gimbal Mount Lens Holder with Angle.

This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.

The micrometer spindles have large diameter plastic rings attached to the spindle drum to make it easier to accomplish very precise adjustments. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.

The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.

The last component is a right-angle support bracket for attaching the gimbal mount to a table. The gimbal carrying plate attaches to the bracket with four Allen cap screws.

Dimensions:

� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.

The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.

Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is excellent. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy. The mounts have been completely gone over and micrometer spindles cleaned and relubricated.

Photo set 1631 .

BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!
***MPN SG201
***OEM Burleigh
***SKU*** 23052

2 in stock

Quantity
MB 47 SKU: 23052 Category:

Description

2 inch Gimbal Mount Lens Holder with Angle.

This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.

The micrometer spindles have large diameter plastic rings attached to the spindle drum to make it easier to accomplish very precise adjustments. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.

The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.

The last component is a right-angle support bracket for attaching the gimbal mount to a table. The gimbal carrying plate attaches to the bracket with four Allen cap screws.

Dimensions:

Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick) Optic axis height = 2 inches
Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees Modified Starrett 263 micrometers with large thimble rings
Overall depth with micrometers – 4 inches
Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.

The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.

Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is excellent. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy. The mounts have been completely gone over and micrometer spindles cleaned and relubricated.

Photo set 1631 .

**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 38
years of experience shipping sensitive scientific instruments &
industrial equipment!
***MPN SG201
***OEM Burleigh
***SKU*** 23052

Additional information

Weight 5.2 lbs
Dimensions 6 × 8 × 8 in