Newport FH-1 Filter Holder
$32.00
This is a Newport Model FH-1 filter holder. The holder uses a fixed aperture plate with two pins on which slide a second fixed aperture plate (aperture diameter is 1.5� in both plates. A third plate fixed to the front aperture plate serves as a baseplate. The gap between the two plates can be adjusted from zero to 1.38� so multiple filters and elements may be stacked together and then held perfectly upright by the sliding plate. The height of the optic axis from the base is 1.25�. Overall height of the holder is 2.25�, and the width of the holder is 2.75�. Length of the baseplate is 2�. The filter holders are in excellent condition!
***MPN FH-1
***OEM Newport Research Corp (NRC)
***SKU*** DP142
8 in stock
CompareThis is a Newport Model FH-1 filter holder. The holder uses a fixed aperture plate with two pins on which slide a second fixed aperture plate (aperture diameter is 1.5� in both plates. A third plate fixed to the front aperture plate serves as a baseplate. The gap between the two plates can be adjusted from zero to 1.38� so multiple filters and elements may be stacked together and then held perfectly upright by the sliding plate. The height of the optic axis from the base is 1.25�. Overall height of the holder is 2.25�, and the width of the holder is 2.75�. Length of the baseplate is 2�. The filter holders are in excellent condition!
***MPN FH-1
***OEM Newport Research Corp (NRC)
***SKU*** DP142
| Weight | 1.4 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Related products
