Altera Flex EPF10K50VQ1240-2 PLD

Altera Flex EPF10K50VQ1240-2

Embedded Programmable Logic Device Family

• ■ The industry’s first embedded programmable logic device (PLD)
  family, providing System-on-a-Programmable-Chip (SOPC)
  integration
  – Embedded array for implementing megafunctions, such as
  efficient memory and specialized logic functions
  – Logic array for general logic functions
  ■ High density
  – 10,000 to 250,000 typical gates (see Tables 1 and 2)
  – Up to 40,960 RAM bits; 2,048 bits per embedded array block
  (EAB), all of which can be used without reducing logic capacity
  ■ System-level features
  – MultiVoltTM I/O interface support
  – 5.0-V tolerant input pins in FLEX® 10KA devices
  – Low power consumption (typical specification less than 0.5 mA
  in standby mode for most devices)
  – FLEX 10K and FLEX 10KA devices support peripheral
  component interconnect Special Interest Group (PCI SIG) PCI
  Local Bus Specification, Revision 2.2
  – FLEX 10KA devices include pull-up clamping diode, selectable
  on a pin-by-pin basis for 3.3-V PCI compliance
  – Select FLEX 10KA devices support 5.0-V PCI buses with eight or
  fewer loads
  – Built-in Joint Test Action Group (JTAG) boundary-scan test
  (BST) circuitry compliant with IEEE Std. 1149.1-1990, available without consuming any device logic