Wild Heerbrugg MTr2 6v 30w Regulating
1 in stock
|Dimensions||10 × 10 × 8 in|
|Tested||Sold AS IS. As Described|
|Cosmetic Condition||3 - Good|
|OEM Name||Wild Heerbrugg|
*** Please note that the lamp socket is NOT included with the transformer � it was photographed to demonstrate the working condition of the transformer. ***
This is a nice regulating 6-volt transformer as supplied for several of the vintage Wild stereo microscopes. There are two output taps on the rear of the transformer which allow one to power a pair of 15w lamps or a single 30w lamp. The transformer is continually adjustable with the power switch integral with the intensity setting knob. A pilot lamp indicates that the power is on, and there is a volt meter for repeatable settings of lamp intensity. The output is continually adjustable. It is identical in most respects with the Model MTR 16 transformer, however it was originally supplied with a two-wire line cord. That has been replaced with a three-wire cord that has been internally grounded in a similar fashion to that of the MTR 16. The transformer also lacks the tap for a 250v primary line.
Socket and bulb NOT included
Input line selector 110 / 125 / 150 / 220 V
Secondary 30 vA
50 or 60 cycle line current
Three-wire line cord internally grounded within enclosure
The transformer is in excellent and fully functional condition. Lamp output varies smoothly without any drop-outs or sudden peaks in intensity. Cosmetic condition is very good. There are a few places where the finish on the top of the transformer is blemished, and the original knob has been replaced (see photos).
***OEM Wild Heerbrugg